9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM B748 testing. These labs commonly handle Metal matrices. Most frequently tested analytes via this method in United States: Hardness. From the accredited scope text: “ASTM B748, E766 Mechanical Tests Hardness/Microhardness Brinell – 3000kg ASTM E10 Durometer Hardness (Shore A, D, and M) ASTM D2240 Microhardness Knoop – 500g, Vickers 500g ASTM E384 Rockwell (HRBW, H” “ASTM B748, E1508, ASM Handbook Volume 12 Environmental Exposure Simulation Effects of Liquids (Rubber) ASTM D471 Hardness Durometer Type: A, M, D ASTM D2240 Impact Izod/Charpy ASTM D256, D4812, D6110” “ASTM B748, E766 Specimen Preparation ASTM E3 Steel Cleanliness by Magnetic Particle test AMS 2301, 2304; JIS G 0556 Surface Roughness ASME B46.1 Tensile Testing (Axial & Wedge) ASTM A1058, A370, B557,” “ASTM B748 Tensile, Yield, Elongation, Reduction of Area ASTM A370, E8 (Room Temperature) LAP Shear ASTM D1002 Plating Thickness ASTM B487, B748 Passivation of Stainless Steel, Copper Sulfate Test ASTM”
Euless, TX, US
ASTM B748 Case Depth SAE J423 Macroetching ASTM A604/A604M, ASTM E340, ASTM E381; AMS 6400 Corrosion Susceptibility ASTM A262 (Rapid Screening), ASTM A923 (Methods A & B) Volume Percent ASTM E562 IGA, Eutectic Melting, H
Broken Arrow, OK, US
ASTM B748, E1508, ASM Handbook Volume 12 Environmental Exposure Simulation Effects of Liquids (Rubber) ASTM D471 Hardness Durometer Type: A, M, D ASTM D2240 Impact Izod/Charpy ASTM D256, D4812, D6110 Mechanical
Cleveland, OH, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Andrew Kearns Phone: 440 243 3311 Andrew.Kearns@element.com MECHANICAL Valid To: September 30, 2026 Certificate
Charlotte, NC, US
ASTM B748 Calibrating the Magnification of a SEM ASTM E766 Metallographic Preparation of Thermal Sprayed Coatings ASTM E1920 Determining Area Percentage Porosity in Thermal Sprayed Coatings ASTM E2109 Rating & Classifyin
Saint Louis, MO, US
ASTM B748 Tension Testing of Metals ASTM A370, E8/E8M Brinell Hardness (500, 3000kg) ASTM E10 Rockwell Hardness (B, C, 30N, 30T) ASTM E18, F606/F606M Average Grain Size (Comparison) ASTM E112 Microhardness (HK 0.1, 0.5; HV
Largo, FL, US
ASTM B748 Tensile, Yield, Elongation, Reduction of Area ASTM A370, E8 (Room Temperature) LAP Shear ASTM D1002 Plating Thickness ASTM B487, B748 Passivation of Stainless Steel, Copper Sulfate Test ASTM A380 (Paragraph 7.2.5.3) Meta
Richardson, TX, US
ASTM B748, E766 Mechanical Tests Hardness/Microhardness Brinell – 3000kg ASTM E10 Durometer Hardness (Shore A, D, and M) ASTM D2240 Microhardness Knoop – 500g, Vickers 500g ASTM E384 Rockwell (HRBW, HRC, HR15N, HR30N, HR1
Phoenix, AZ, US
ASTM B748, E766 Specimen Preparation ASTM E3 Steel Cleanliness by Magnetic Particle test AMS 2301, 2304; JIS G 0556 Surface Roughness ASME B46.1 Tensile Testing (Axial & Wedge) ASTM A1058, A370, B557, E8/E8M, F606/606M; SAE
Virgil, IL, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MATERIALS ENGINEERING OF ILLINOIS, INC. 47W605 I. C. Trail Virgil, IL 60151 Melanie Reibly Phone: (630) 365 - 9060 MECHANICAL Valid To: March 31, 2028 Certificate Number: 15
This page is a fixed slice of the register: every ASTM B748 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.