10 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D149 testing. From the accredited scope text: “ASTM D149 Dielectric Breakdown Volta ge and Dielectric Strength (100 kV Maximum) ASTM D150 Dielectric Constant (Permittivity) and Dissipation Factor ASTM D256 Izod Pendulum Impact Resistance: Impact R” “ASTM D149; IEC 60243 Surface and Volume Resistivity ASTM D257; IEC 62631-3-1, 62631-3-2, 60093 (2015) Dimensional 4 Parameter Range CMC (±) 5 Technique Length Up to 12ft Up to 3.6m sphere ±0.0014 in ±” “ASTM D149 Types 1, 3, & 4; MIL-STD-202, Method 301 Contact Resistance, Low Level Contact Resistance (LLCR) (100 μΩ to 200 kΩ) MIL-STD-202, Method 303, 304, 307; MIL-DTL 83513G, Method 3.5.6” “ASTM D149; IPC-TM-650 (Methods 2.5.6, 2.5.6.1, 2.5.6.2, and 2.5.6.3); IEC 62631 Electromigration (ECM) Insulation Resistance (IR) Moisture and Insulation Resistance (MIR) Surface Insulation Resistance”
Anaheim, CA, US
ASTM D149; DC Range: (0 to 6) kV * IPC-4101; AC Range: (0 to 70) kV * IPC-TM-650 (Methods 2.5.6.2 and 2.5.6); UL 746A; IPC-6012; IPC-A-600; IPC-6013; IPC-9201; IPC-TM-650 (Methods 2.5.7 and 2.5.7.1); MIL-ST
Ithaca, NY, US
ASTM D149 Dielectric Breakdown Volta ge and Dielectric Strength (100 kV Maximum) ASTM D150 Dielectric Constant (Permittivity) and Dissipation Factor ASTM D256 Izod Pendulum Impact Resistance: Impact Resistance, Izod Impact, Revers
Franksville, WI, US
ASTM D149, D877, D3300, D3426, F711, F712, F855, F968; CENELEC HD 629.1 S2. On the following materials: Bushings, Cable Connectors, Capacitors, Capacitor Switches, Circuit Breakers, Fault Indicators, Fault Interrupters, Fuses, Insulat
Suite A Irvine, CA, US
ASTM D149 Insulation Resistance MIL-STD-202 F & G, Method 302; MIL-STD-883 E & F, Method 1003
Barberton, OH, US
ASTM D149 Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulation Materials at Commercial Power Frequencies ASTM D120 - Section 18 Rubber Insulating Gloves – Electrical Properties FEA MODELING AND SUPPORT
Hunt Valley, MD, US
ASTM D149; IPC-TM-650 (Methods 2.5.6, 2.5.6.1, 2.5.6.2, and 2.5.6.3); IEC 62631 Electromigration (ECM) Insulation Resistance (IR) Moisture and Insulation Resistance (MIR) Surface Insulation Resistance (SIR) Range: 105Ω to 1012Ω
Mount Prospect, IL, US
ASTM D149 Types 1, 3, & 4; MIL-STD-202, Method 301 Contact Resistance, Low Level Contact Resistance (LLCR) (100 μΩ to 200 kΩ) MIL-STD-202, Method 303, 304, 307; MIL-DTL 83513G, Method 3.5.6
Golden, CO, US
ASTM D149 Electrical Resistivity ASTM D257 Average Grain Size by Semiautomatic and Automatic Image Analysis ASTM E1382 Microscopic Evaluation of Depth of Grinding Damage CTAL-30-MIC-03
Kentwood, MI, US
ASTM D149; IEC 60243 Surface and Volume Resistivity ASTM D257; IEC 62631-3-1, 62631-3-2, 60093 (2015) Dimensional 4 Parameter Range CMC (±) 5 Technique Length Up to 12ft Up to 3.6m sphere ±0.0014 in ±0.036mm CMM-ROMER
Ravenna, OH, US
ASTM D149
This page is a fixed slice of the register: every ASTM D149 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.