10 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D5587 testing. From the accredited scope text: “ASTM D5587 Standard Test Method for Tearing Strength of Nonwoven Fabrics by Trapezoid Procedure ASTM D5733-99 (Withdrawn 2008) Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam of” “ASTM D5587, ASTM D5733-99 (2008); NFPA 1971 8.12 Warp (End) and Filling (Pick) Count of Woven Fabric ASTM D3775 Water Resistance - Hydrostatic Pressure Test AATCC 127 Option 2 Water Resistance - Hydro” “ASTM D5587 Tearing Strength of Fabrics by the Trapezoid Procedure ASTM D5733 Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure ASTM D624 Tear Strength of Conventional Vulcanized Rubber a” “ASTM D5587 Standard Test Method for Tearing Strength of Non-Woven Fabrics by Trapezoidal Method ASTM D5733”
Louisville, KY, US
ASTM D5587 Section 9.3.2 Breaking Strength Test ASTM D5034 Section 9.3.3 Burst Strength Test ASTM D6797 Section 9.3.4 Seam-Breaking Strength Test ASTM D1683/D1683M Section 9.3.5 Helmet Top Impact Resistance Test (Force) -- S
Warren, MI, US
ASTM D5587 Tearing Strength of Fabrics by the Trapezoid Procedure ASTM D5733 Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure ASTM D624 Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomer GMW3326 T
Burlington, NC, US
ASTM D5587 Standard Test Method for Tearing Strength of Nonwoven Fabrics by Trapezoid Procedure ASTM D5733-99 (Withdrawn 2008) Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam of Woven Upholstery Fabrics ASTM D40
Duluth, GA, US
ASTM D5587 Standard Test Method for Tearing Strength of Non-Woven Fabrics by Trapezoidal Method ASTM D5733
Bldg B Grand Rapids, MI, US
Test(s): Test Method(s): Seam Slippage ASTM D434-95 (withdrawn), D1683, D3597 Section 6.3, D4034 Smoldering Ignition Flammability ASTM E1353 Cover Fabric Test; California TB:117 2013 Section 1 – Cover Fabrics; IMO Parts 8 & 9; NFPA 260
Harper Woods, MI, US
ASTM D5587, ASTM D5733-99; CFFA-16 c; Chrysler LP-463KB-3-01; GMW3326; Honda HES D6506; ISO 9073-4 Tensile ASTM D412, ASTM D461, ASTM D638, ASTM D751, ASTM D882, ASTM D1056, ASTM D1117, ASTM D2208, ASTM D2209, ASTM D2211, AS
New York, NY, US
ASTM D5587, ASTM D5733-99 (2008); NFPA 1971 8.12 Warp (End) and Filling (Pick) Count of Woven Fabric ASTM D3775 Water Resistance - Hydrostatic Pressure Test AATCC 127 Option 2 Water Resistance - Hydrostatic Pressure Test Wetting su
Kentwood, MI, US
ASTM D5587; ASTM D1117; ASTM D751 (Sections 32-35); GMW3326 Volatile Content Loss ASTM D1203; ASTM D2369; Chrysler LP-463DD-4-01 Volatile-Solid Content Chrysler LP-463CA-1-01; GM 9010P Volume Change ASTM D471; ISO 1817 Water A
Madison Heights, MI, US
ASTM D5587; ASTM D57332 (withdrawn 2008, no replacement); FLTM BN 150-02; GMW3326; ISO 34-1; ISO 4674-1; ISO 6383-1; ISO 8067;
Burlington, WI, US
Test Description/ Equipment Parameter Test Method(s): Linear Abrasion (Taber) (0.2 to 4.0) inch stroke length, (2 to 75) cycles/minute, 2100 gram max load GMW 14130; ISO 1518 Martindale Abrasion LP-463KC-04-03; ISO 12945-2 (pilli
This page is a fixed slice of the register: every ASTM D5587 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.