FindTestingLabs

ASTM E415 Accredited Testing Labs in United States

14 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM E415 testing. These labs commonly handle Metals, Steel, Materials matrices. Most frequently tested analytes via this method in United States: Al, C, Elemental Composition. Accredited providers include Analytical Process Laboratories, Inc., Element Materials Technology Daleville, Titan Metallurgy, L.L.C., Al Futtaim Element Materials Technology Dubai L.L.C., Greer Steel Company Metallurgical. Sites located in Milwaukee, WI, Daleville, IN, Oak Park, MI, Dubai, Dover, OH.

Labs
14
Top matrix
Metals
2 labs
Top analyte
Al
2 labs
Primary AB
A2LA
14 labs

Accredited Labs

Analytical Process Laboratories, Inc.
Milwaukee, WI, US

(A2LA Cert. No.0431.03) 10/01/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ANALYTICAL PROCESS LABORATORIES, INC. 8222 West Calumet Road Milwaukee, WI 53223 Joseph Worzala

Element Materials Technology Daleville
Daleville, IN, US

(A2LA Cert No. 0174.01) 11/22/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT MATERIALS TECHNOLOGY DALEVILLE 9301 Innovation Dr., Suite 175 Daleville, IN 47334 Jon Wagner Phone: 215 579 7500

Titan Metallurgy, L.L.C.
Oak Park, MI, US

(A2LA Cert. No. 2087.01) 12/12/2025 Page 2 of 2 Test Test Methods Failure Analysis ASM Handbook Volume 11 Scanning Elec

Al Futtaim Element Materials Technology Dubai L.L.C.
Dubai, US

(A2LA Cert. No. 5669.14) REVISED 02/09/2024 Page 5 of 5 Test(s): Test Method(s): Corrosion (cont.): Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels ASTM A923 Method A and Method C Detect

Greer Steel Company Metallurgical
Dover, OH, US

(A2LA Cert. No. 1421.01) 03/28/2024 Page 2 of 2 Test: Test Method(s): II. Chemical Testing Optical Emission Spectroscopy (Al, B, C, Ca, Cb, Cr, Cu, Mn, Mo, Ni, P, S, Si, Ti, V) ASTM E415 1The laboratory is accredited

Element Materials Technology Chicago
Glendale Heights, IL, US

(A2LA Cert. No. 0104.01) 06/10/2024 Page 2 of 2 Test Test Method(s) Optical Emission Spectroscopy (OES) ASTM E415, E1086, E1251, E1999, E2209 Carbon and Low Alloy Steel (Al, As, B, C, Co, Cr, Cu, Mn, Mo, Nb, Ni, P, S, Sb, Si,

QST INTERNATIONAL CO, LTD.
Tainan City, US

(A2LA Cert. No. 6310.01) 08/01/2025 Page 2 of 3 II. Chemical Analysis: Tests: Test method(s): Optical Emission Spectroscopy on Carbon Steel and Alloy Steel (C, Si, Mn, P, S, Ni, Cr, Mo) ASTM E415 1 This accreditat

Materials Technology
Birmingham, AL, US

(A2LA Cert. No. 0878.01) 04/22/2024 Page 2 of 2 CHEMICAL Test: Test Method(s): Spark Atomic Emission Spectrometry Carbon and Low Alloy (Al, B, C, Co, Cr, Cu, Mn, Mo, Nb, Ni, P, Pb, S, Si, Ti, V) Stainless Steels (Al, B, C,

Laboratory Testing
Hatfield, PA, US

(A2LA Cert. No. 0117.05) Revised 10/19/2025 Page 2 of 2 Test( s ) Test Method(s) PMI1 Portable X-Ray Fluorescence ASTM 1476 Gravimetric, Titrimetric, Volumetric Elemental Wet

Fastenal Company
Winona, MN, US

(A2LA Cert. No. 1046.01) Revised 09/16/2025 Page 3 of 5 Test Test Methods Ultrasonic Testing Magnetic Particle Testing Penetrant Testing ASTM E114, A388/A388M

Element Materials Technology New Berlin
New Berlin, WI, US

(A2LA Cert. No. 0098.01) Revised 09/25/2025 Page 1 of 3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT MATERIALS TECHNOLOGY NEW BERLIN INC. 3200 South 166th Street New Berlin, WI 53151 Mark A. Harty Phone: (

Westmoreland Mechanical Testing & Research
Youngstown, PA, US

(A2LA Cert. No. 0621.02) 09/18/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 221 Westmoreland Drive Youngstown, PA 15696 Charles Connors Jr.

Goolsby Testing
Humble, TX, US

(A2LA Cert. No. 3119.01) Revised 11/04/2025 Page 3 of 3 Test Method: Carbon and Alloy Steels Al As B C Ca Co Cr Cu Mn Mo N Nb Ni P S Sb Si Sn Ti V Zr Stainless Steels C Cr Cu

Chicago Spectro Service
Chicago, IL, US

(A2LA Cert. No. 0781.01) 03/17/2025 Page 3 of 3 WELDBEND CORPORATION 6600 S. Harlem Ave. Argo/Summit, IL 60501-1930 Geoffrey Goldblatt Phone: 773 229 0099 geoff@chicagospectro.com CHEMICAL Test Test Method

Top matrices for ASTM E415 in United States

Top analytes for ASTM E415 in United States

  • Al (2)
  • C (1)
  • Elemental Composition (1)
  • Iron (1)
  • Metals (1)

About ISO/IEC 17025 in United States

American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.

ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.

Related searches

Same method, other countries:
All accredited testing labs in United States