15 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM E562 testing. These labs commonly handle Metal, Steel matrices. Most frequently tested analytes via this method in United States: Hardness. From the accredited scope text: “ASTM E562 Grain Size ASTM E112, E930, E1181 Graphite Type and Distribution ASTM A247 Macroscopic Preparation/Examination ASTM A561, A604, E381, E340; AMS 2433; GM4460P Specimen Preparation ASTM E3, E4” “ASTM E562; AMS 2315 Estimating Depth of Decarburization of Steel Specimens ASTM E1077, F2328, F835; ISO 898-1; ISO 898- 5; SAE J419 Evaluating Graphite Microstructure in Iron Castings ASTM A247 Macroe” “ASTM E562; MCL III 237.06 Heat Treatment Solution/Incipient Melting Measurement ASTM E562; MCL III-274 Wrought Titanium Microstructure MCL III-273 Micro Porosity by Image Analysis and Point Count MCL” “ASTM E562 Inclusion Rating / Microcleanliness ASTM E45 (Method A & D), ISO 4967 Metallographic Specimen Preparation ASTM E3 Macro / Micro Etch ASTM A561, A604, E340, E381, E407 Photomicrography ASTM E”
Whitehall, MI, US
ASTM E562; MCL III 237.06 Heat Treatment Solution/Incipient Melting Measurement ASTM E562; MCL III-274 Wrought Titanium Microstructure MCL III-273 Micro Porosity by Image Analysis and Point Count MCL III-270, ASTM E562 O
Portland, OR, US
ASTM E562 Determination of Delta Ferrite Content AMS 2315, US NRC Reg. Guide 1.31 Case Depth SAE J423 Grain Size ASTM E112 (Method A & D), E930, E1181 Inclusion Content ASTM E45 (Method A) Intergranular Attack/Corrosion
Broken Arrow, OK, US
Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60
Cleveland, OH, US
ASTM E562 Inclusion Rating / Microcleanliness ASTM E45 (Method A & D), ISO 4967 Metallographic Specimen Preparation ASTM E3 Macro / Micro Etch ASTM A561, A604, E340, E381, E407 Photomicrography ASTM E883 Plating Thickness / Coating Th
Cleveland, OH, US
ASTM E562 Grain Size ASTM E112, E930, E1181 Graphite Type and Distribution ASTM A247 Macroscopic Preparation/Examination ASTM A561, A604, E381, E340; AMS 2433; GM4460P Specimen Preparation ASTM E3, E407 Microcleanliness ASTM E45 (
Pittsburgh, PA, US
ASTM E562, E1245 ASTM B487 Ambient Temperature Tensile 600,000 lbs Capacity ASTM A370, A770, B557, E8/E8M, E111; NASM 1312-18 Compression 600,000 lbs Capacity ASTM E9, F36 Weld/Braze Operator/Procedure Qua
Allentown, PA, US
ASTM E562
Columbus, OH, US
ASTM E562 Weld Weld Procedure/Welder Qualification ASTM E8/E8M, ASTM E190, ASTM E290, ASTM E23, ASTM E208 in accordance with AWS B4.0 Fillet Weld Test AWS B4.0 Chemical Properties Glow Discharge Atomic Emissio
Erie, PA, US
ASTM E562 Grain Size (Comparison Method Only) ASTM E112 Inclusion Rating / Cleanliness ASTM E45 Methods A & D; SAE J422 Microhardness ASTM E384, E92 Vickers (100g, 500g, 1000g) Microstructure ASTM E1268; ASM Metals Handbook, Volume 9
Birmingham, AL, US
ASTM E562 Intermetallic Phase ASTM A923-A Inclusion Content (Method A) ASTM E45 Intergranular Corrosion ASTM G28-A, G48-A, A262-E, A262-C, A923-C; DIN EN3651-A
Waukesha, WI, US
ASTM E562 Intergranular Corrosion ASTM A262, Practice A Failure Analysis Using the methods listed above in accordance with ASM Handbook Volume 11
Tipp City, OH, US
ASTM E562; AMS 2315 Estimating Depth of Decarburization of Steel Specimens ASTM E1077, F2328, F835; ISO 898-1; ISO 898- 5; SAE J419 Evaluating Graphite Microstructure in Iron Castings ASTM A247 Macroetching ASTM E381, A604/A604M Mic
Crystal Lake, IL, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TC INDUSTRIES TEST CENTER 3703 S. Route 31 Crystal Lake, IL 60012 Ken Rueff Phone: 815 333 8343 MECHANICAL Valid To: February 28, 2027 Certificate Number: 1281.01 In re
Phoenix, AZ, US
ASTM E562; SAE AMS 2315 Weld Procedure and Weld Operator Qualification AWS B4.0 (Part A-D): D1.1, D1.2, D1.5, D1.6; ASME Section IX; NAVSEA S9074-AQ-GIB-010/248
Sturbridge, MA, US
Test Technology: Test Method(s): Electrical Contact Resistance of Class 3 Coatings MIL-DTL-5541, MIL-DTL-81706 Micro and Macro Imaging Using Optical and Keyence Digital Microscopy ASM Handbook Volume 9 Metallographic Sample
This page is a fixed slice of the register: every ASTM E562 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.