9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ISO 898-1 testing. These labs commonly handle Fasteners matrices. From the accredited scope text: “ISO 898-1 Internal ASTM A962/A962M, F606/F606M; EN 493; ISO 898-2, 10485; SAE J1216; GM510M (Section 6.1) (2011); DIN 267-4; IFI 100/107 Axial and Cone ASTM F606/F606M; GM 510M; SAE J122, J1965 Full S” “ISO 898-1, ISO 6892-1; MIL-STD-1312-8, MIL-STD-1312-18; NASM 1312-8, NASM 1312-18; SAE J82, SAE J429 Wrench Torque Test of Externally Wrenched Nuts of Spline, Hexagon and Double Hexagon Wrenching Conf” “ISO 898-1; ICC AC437 (Sec. 4-1-4.3 only) Wedge Tensile ASTM A370, ASTM F606/F606M; ISO 898-1 Screw Thread Insert MIL-I-45914A Shear / Double Shear / Triple Lug Shear ASTM F606; NASM 1312-13, 1312-20;” “ISO 898-1; ISO 898- 5; SAE J419 Evaluating Graphite Microstructure in Iron Castings ASTM A247 Macroetching ASTM E381, A604/A604M Microetching ASTM E407 Reflected Light Photomicrography ASTM E883 Corro”
Cleveland, OH, US
ISO 898-1; ICC AC437 (Sec. 4-1-4.3 only) Wedge Tensile ASTM A370, ASTM F606/F606M; ISO 898-1 Screw Thread Insert MIL-I-45914A Shear / Double Shear / Triple Lug Shear ASTM F606; NASM 1312-13, 1312-20; ICC AC437 (Sec. 4-1-4
Cleveland, OH, US
ISO 898-1 Internal ASTM A962/A962M, F606/F606M; EN 493; ISO 898-2, 10485; SAE J1216; GM510M (Section 6.1) (2011); DIN 267-4; IFI 100/107 Axial and Cone ASTM F606/F606M; GM 510M; SAE J122, J1965 Full Size Eyebolts ASTM A489, F541
Huntington Beach, CA, US
ISO 898-1, ISO 6892-1; MIL-STD-1312-8, MIL-STD-1312-18; NASM 1312-8, NASM 1312-18; SAE J82, SAE J429 Wrench Torque Test of Externally Wrenched Nuts of Spline, Hexagon and Double Hexagon Wrenching Configuration NASM 25027 Yield Stre
Winona, MN, US
ISO 898-1, 898-2, 898-5; NASM 1312-6; ASME SA370 ASTM E10 ASTM A956/A956M Hex Socket Strength ASTM F880, F880M (2017), F912, F912M (2017); ISO 898-5, 3506-3 Microhardness (Vickers) (300 & 500 gf) ASTM E384 Proof (Exter
Tipp City, OH, US
ISO 898-1; ISO 898- 5; SAE J419 Evaluating Graphite Microstructure in Iron Castings ASTM A247 Macroetching ASTM E381, A604/A604M Microetching ASTM E407 Reflected Light Photomicrography ASTM E883 Corrosion Resistance (IGA) ASTM A262 (
Elk Grove Village, IL, US
ISO 898-1, ISO 2702 Microhardness (Knoop 500 gf, Vickers 300 gf) ASTM E384, GM 6010M (Section 3.2) (superseded 8/2011)2, GM 6170M (Section 3.2) (superseded 8/2011)2, GM 6171M (Section 3.2) (superseded 8/2011)2, GMW15170, ISO 898-1
Phoenix, AZ, US
ISO 898-1 Failure Investigation ASM Metals Handbook Vol. 11 Grain Size Exam ASTM E112, E930, E1181 Graphite Microstructure ASTM A247 Inclusion or Second-Phase Content by Automatic Image Analysis ASTM E1245 Intergranular
Rancho Cucamonga, CA, US
ISO 898-1, 898-2 Grain Size Determination (Comparison) ASTM E112, E1181 Coating Thickness ASTM B487; NASM1312-12 Case Depth (Effective and Total) ASMT B934; SAE J423 Macro Examination ASTM E340; E381
St. Paul, MN, US
ISO 898-1, ISO 6892-1; JIS B1051; NASM 1312-8; SAE J82 Bend, Guided and Semi-Guided (Welds) ASME Section IX; AWS D1.1/D1.1M, D1.2/D1.2M, D1.3/D1.3M, D1.4/D1.4M, D1.5/D1.5M, D1.6/D1.6M, D17.1/D17.1M, D17.3 Bend Test (General) AST
This page is a fixed slice of the register: every ISO 898-1 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.