ASTM A90 Accredited Testing Labs Worldwide

ASTM A90 Combustion: C, N, S ASTM E1019

ASTM A90; ASTM B680 Coating/ Film Thickness Microscopic Measurements Digital Thickness Gauge ASTM B487; ASTM B499; FLTM BI 117-01; GMW14668; ISO 2808, Sect. 5.4, 5.5; TS371-00-004 [2017], Sect. 2, 3 Paint Film Permea

ASTM A90/A90M; CTP 30682, CTP 30692 Mercurous Nitrate ASTM B154; PTP 10442 1This standard is a specification and is used to support the ICP test methods on the Lab’s scope. 2In-House Test Method.

ASTM A90/A90M, A428/A428M, A924/A924M Corrosion Creepback ASTM B117, D610, D1654; GM9102P (Inactive 2010); GMW15282 Environmental Humidity Salt Spray ASTM D1735, D2247 ASTM B117; FLTM BI 103-01; ISO 9227(NSS); JIS Z2371 High

ASTM A90, A428, B137; NASM 1312-12 Conductivity, Resistivity ASTM B193, E1004 Surface Roughness / Surface Finish ASME B46.1 Adhesion of Metallic Coatings (Bend Test, Burnishing Test, File Test, Grind-Saw. Heat-Quench Test) ASTM B571

ASTM A90/A90M, ASTM A917 (Section 8) Bend Test (Bend and Flatten) ASTM E290, ASTM A917 (Section 9) Surface Roughness using a Profilometer SAE J911; ASME B46.1 CHEMICAL Atomic Emission Spectroscopy (OES) Carbon and Low Alloy Stee

ASTM A90, A428, B137; MIL-DTL-16232 Conductivity ASTM E1004 Hydrostatic Pressure Tests (0 to 40,000) psi SOP 44.001 Mechanical Tests of Metals and Metal Products Bend ASTM E190, E290; AWS B4.0, D1.1, D1.2, D1.5; DIN EN 910

ASTM A90/A90M; BS EN ISO 1460 Corrosion: Determining Average Grain Size (Comparison method) ASTM E112 Determining the Inclusion Content of Steel ASTM E45 Method A Preparation of Metallographic Specimens ASTM E3 Standard Practice for M

ASTM A90/A90M Plastic Strain Ratio ( R ) ASTM E517 Strain Hardening Exponent (n) ASTM E646 Surface Discontinuity ISO 6157-3; SAE J123, J1601; ASTM F788-13 Tensile for Externally Threaded Fasteners (Axial, Wedge, Proof) ASTM F606/F606M

ASTM A90/A90M, B767; ISO 3892 Drill Drive Test DIN 7504; F.I.P. 1000; SAE J78; ISO 10666; IFI-113 Salt Spray Test (Neutral Salt Spray) ASTM B117; ISO 9227; SAE/USCAR-1 Water Fog Humidity Test GM 4465P; GM 14729 Grain F

ASTM A90/A90M, A309:20152 (Method D), A428/A428M, B137, B767 SEM/EDS (Semi Quantitative) ASTM E1508

ASTM A90/A90M; BS EN ISO 1460 Adhesive Lap Shear ISO 21809-3 Annex J; EN 12068; ASTM D 1002 Holiday Detection ISO 21809-3 annex C; ISO 21809-1 Annex B; ASTM G62; ASTM A775 Cathodic Disbondment Test ISO 21809-3 Annex G, ISO 21809-

ASTM A90/A90M; LABP08-004* Charpy Impact (V-Notch) ASTM E23; ASTM A370 Guided-Bend ASME BPVC IX – QB 160; API 1104 – 5.6.4 & 5.6.5; AWS D1.1/D1.1M – 6.10.3.1 & 6.10.3.2; ASTM A370 – section 15 & Annex A2.5.1.7 Tensile Testin

ASTM A90/A90M On the following materials (as appropriate): Cast Iron, Low Alloy Steel, Stainless Steel, Tool Steel, Aluminum alloys, Copper Alloys, Nickel Alloys, Cobalt Alloys

ASTM A90/A90M Combustion Analysis – LECO (C, H, O, N, S) ASTM E1019, E1409, E1447, E1941; CAP-032 Extractables (Gravimetric) ASTM F2459; CAP-074 Moisture Analysis CAP-087A Total Organic Carbon USP 643 Viscosity ASTM D44

ASTM A90/A90M, A428/A428M, B137; MIL- A-8625; MIL-DTL-16232

ASTM A90/A90M Metallographic Evaluation: Sample Preparation ASTM E3 Graphite Microstructure ASTM A247; ISO 945 Grain Size ASTM E112, E1181 Inclusion Content ASTM E45 (Methods A, C, D and E); ISO 4967; DIN 50602 (Methods M and K)

ASTM A90 ICP (AES) (Ag, Al, As, Au, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Eu, Fe, Ga, Gd, Ge, Hf, Hg, Ho, In, Ir, K, La, Li, Lu, Mg, Mn, Mo, Na, Nb, Nd, Ni, Os, P, Pb, Pd, Pr, Pt, Rb, Re, Rh, Ru, Sb, Sc, Se, Si, Sm, Sn,

ASTM A90/A90M; ASTM A428/A428M; ASTM B137; ASTM B680; ASTM B767 (9.1.1); Ford FLTM BQ 007-02; Honda 5100Z-SE0-0000 (7.2); Honda 5100Z-SG0-A000 (7.2); Honda 9000Z-T2A-A000 (6.2); Honda 9000Z-SJA-A000 (6.2.1); Honda HES D2008 (4.2

ASTM A90/A90M, A428; B137, B767; ISO 3892 Solvent Rub PC-14 ASTM D4752, D5402; GM9509P Miscellaneous Testing Density & Interconnected Porosity of Powdered Metal Alloys CM-02 ASTM B311, B328 (Withdrawn 2009), B962, B963; MPIF

ASTM A90/A90M, A428/A428M; Honda HES D2008, Honda 5100Z-SGO-A000, Honda 5100Z-SEO-000, Honda 5100Z-TR0-6001, 5100Z-3MAA-8000, 5100Z-3MAA-6000, 9000Z-T2A-A000 Fuel Resistance Honda HES D2016, D2021, Honda 5100Z-SGO-A000 (6-17),

ASTM A90 Decarburization Exam ASTM E1077, ASTM F2328; J419 Detrimental Intermetallic Phases in Duplex Stainless Steels ASTM A923 Discontinuity Exam ASTM A574, F788, F812; ISO 898-1 Failure Investigation ASM Metals Handbook V

ASTM A90; ASTM B767 Environmental/ Corrosion Testing Corrosion ASTM C1617; ASTM B858; Chrysler LP- 463PB-52-01; LP463PB-22-01; ASTM D2803; GMW14872; Ford CETP 00.00-L- 467; GMW 14124 (except Cycles H, N, R, T); SAE J2334; GMW 15288;

ASTM A90 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Only Sections 6 to 14)

ASTM A90/A90M Corrosion of Surgical Instruments ASTM F1089 Combustion Analysis (LECO - C & S) ASTM E1019, E1941 Density ASTM B311 Particle Size Analysis Sieve Analysis ASTM B214, E11 Hall Flow Rate / Apparent Density AS

ASTM A90, B659, B767 MECHANICAL Bend Test for Ductility of Welds ASTM E190 Hardness Rockwell B, C ASTM E18 Superficial 15T, 30T, 45T ASTM E18 Superficial 15N, 30N, 45N ASTM E18, F606/F606M Micro

ASTM A90/A90M Full Sized Eye Bolts: Bend Test, Breaking Strength and Proof Load ASTM F541 Impact, Notched Bar (Room Temperature to -321) °F ASTM A370, A489, A673/A673M, E23; AWS D1.5/D1.5M; DTW 766; ISO 148-1 Mechanical and

ASTM A90 Case Depth SAE J423 Microstructure ASM Metals Handbook Vol. 9