ASTM D635 Accredited Testing Labs Worldwide
11 accredited laboratories in 5 countries hold ASTM D635 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D635 scope entries most often cover Flammability, Oxygen Index in Plastics, Textile.
Available in 5 Countries
Top matrices for ASTM D635
Top analytes for ASTM D635
- Flammability (1)
- Oxygen Index (1)
Sample labs
Flexibler Akkreditierungsbereich: Dem Prüflaboratorium ist, ohne dass es einer vorherigen Information und Zustimmung der DAkkS bedarf, die Anwendung der hier aufgeführten genormten oder ihnen gleichzusetzenden Prüfverfahren mit unterschi
ASTM D635; GB 8410; GMW3232; HES C206 [REV.9]; HES D6003 [REV.9]; ISO 3795; ISO J369; LP-463KC-13-01; NES M0094 [2015-2]; RTCA DO-160, Sect. 26; TSM0500G [REV. 19] Pencil Hardness 6B to 6H 0096Z-SM4-0000 [2017], Sect. 10;
ASTM D635-981 1The laboratory is only accredited for the test methods and standards listed above. The accredited test methods are used in determining compliance with the material specification listed. The inclusion of these material s
ASTM D635-19982 Standard Test Method for Rate of Burn and/or Extent and Time of Burning of Plastics in a Horizontal Position 16 CFR 1610 Standard for the Flammability of Clothing Textiles Head Protection: ABNT NBR 8221 Brazilian Nationa
DIN EN ISO 11925 -2 2020-07 Prüfungen zum Brandverhalten - Entzündbarkeit von Produkten bei direkter Flammeneinwirkung - Teil 2: Einzelflammentest In Verbindung mit: DIN EN 13501 -1 2019-05 Klassifizierung von Bauprodukten und
ASTM D635; CAN/CSA C22.2 No.0.17 (Section 5.2.1); CAN/CSA C22.2 No.60950-1 (Sections 4.7.3.1 - 4.7.3.6); EN 60950-1 (Sections 4.7.3.1 - 4.7.3.6); IEC 60950-1 (Sections 4.7.3.1 - 4.7.3.6); UL 60950-1 (Sections 4.7.3.1 - 4.7.3.6); IE
ASTM D635 Test Method for Rate of Burning and/or Extent and Time Burning of Self- Supporting Plastics in a Horizontal Position ASTM D638 Test Method for Tensile Pro perties of Plastics ASTM D646 Mass Per Unit Area of Paper and P
ASTM D635 Standard test method for rate of burning and/or extent and time of burning of plastics in a horizontal position ASTM D1929 Standard test method for determining ignition temperature of plastics ASTM D2843 Standard test method
ASTM D635; UL 94 Ships and marine technology – Low-location lighting (LLL) on passenger ships - Arrangement ISO 15370 Potential Heat of Building Materials NFPA 259 Flame Propagation of Textiles and Films NFPA 701 Flame Resistance AST
ASTM D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position ASTM D638 Standard test method for tensile properties of plastics ASTM D648 Standard test method for deflection
ASTM D635-22, ASTM D635-22 + UL 94:2023, UL 94:2023 Prove al fuoco ASTM C542-05(2024) + ASTM C1166-21 Prove al fuoco Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Accendibilità da parte di materiali