ASTM E384 Accredited Testing Labs Worldwide

ASTM E384 2022 Standard Test Method for Microindentation Hardness of Materials

ASTM E384; GB/T 4340.1 Rockwell (BW, C, 15N, 15TW, 30N, 30TW) ASTM A370, E18; GB/T 230.1 Tensile, Room Temperature – 300KN Max (UTS, YS, EL, R/A and Young’s Modulus) ASTM A370, B557/557M, E8/E8M; GB/T 228.1; ISO 6892-1; EN2002-1 Tens

ASTM E384 ASTM E92 Impact – Charpy Method ASTM E23 Guided Bend Test for Ductility of Welds ASTM E190 Metallographic Evaluation: Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels (Methods A, B, & E)

ASTM E384 Indirect Verification of Rockwell Hardness Testers 3 (40 to 90) HRB-W (20 to 60) HRC 1 HRB 0.37 HRC Indirect verification per ASTM E18 Indirect Verification of Brinell Hardness Testers 3 215 HBW 23

ASTM E384

ASTM E384, E92 Tensile (Axial, Wedge) Yield Strength Elongation Reduction of Area ASTM A370 (A3.2, 13.2.1), F606, F606M (3.4, 3.5, 3.6); ISO 898-1 (9.1, 9.2, 9.5, 9.7) Proof Bolts ASTM A370 (A3.2.1.2), F606, F606M (3.2.3

ASTM E384 ASTM E92 Principaux moyens utilisés : Blocs de référence NF EN ISO 6507-3 et ASTM E384 Sur site Machines de dureté VICKERS Dureté Vérification globale de la machine de dureté par méthode directe : comparaison à une ch

ASTM E384, E92 Vickers (100g, 500g, 1000g) Microstructure ASTM E1268; ASM Metals Handbook, Volume 9 Microstructure in Cast Iron Graphite ASTM A247 Weld Operator and Procedure Qualification Testing (Tensile and Charpy Only) ASME Sec I

ASTM E384 Tensile Testing ASTM A370, ASTM E8/E8M 1 When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current version for a per

Normative document: EN ISO/IEC 17025:2017 Registration number: L 063 of Element Materials Technology Rotterdam. B.V. Laboratory This annex is valid from: 22-10-2025 to 01-09-2028 Replaces annex dated: 01-05-2025 Dutch Accr

ASTM E384 2022 Standard Test Methods for Microindentation Hardness of Materials DU II ASTM E92 2023 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials DU II ASTM A370 2022 Standard T

ASTM E384

ASTM E384; MIL-STD-1312-6; NASM 1312-6 Proof Load of Full-Size Externally Threaded Fasteners ASTM A370, ASTM F606/F606M; ISO 898-1; MIL-STD-1312-8; NASM 1312-8; SAE J1216

ASTM E384 with ASTM E92

Test Test Method(s) Corrosion Testing Intergranular Attack in Austenitic Stainless Steels ASTM A262 (Practices A, B, E, and F) Intergranular Attack in Ferritic Stainless Steels ASTM A763 (Practices W, X, and Y) Intergranular Attac

ASTM E384 Macrohardness Vickers (5, 10 kgf) ASTM E92 Charpy Impact ASTM E23; BS EN ISO 148-1 Nil Ductility Transition (Drop Weight) ASTM E208 Olsen Ductility ASTM E643 Drop Weight Tear ASTM E436 Dynamic Tear ASTM E604 Jominy Hardena

ASTM E384

ASTM E384 Principaux moyens utilisés : Blocs de référence Sur site Moutons pendules équipés d’un couteau de rayon de courbure de 2 mm Energie de rupture Vérification globale du mouton-pendule par méthode indirecte NF EN ISO 148-2 Pr

ASTM E384 Room Temperature Tensile Test (Machined) (≤ 390 klbf) ASTM A370, B557, E8/E8M Axial, Wedge Tensile Test ASTM A370, F606/F606M Proof Load (Internal & External Threads, Fasteners) ASTM F606/F606M Discontinuities ASTM F

ASTM E384-22 ISO 6508-1:2023, UNI EN ISO 6508-1:2024 Durezza Rockwell/Rockwell hardness (HRB, HRC) ASTM E18-25 Durezza Vickers/Vickers hardness (HV0,1-HV0,3-HV0,5-HV1-HV5-HV10-HV30) EN ISO 6507-1:2023, ISO 6507-1:2023, UNI EN ISO 6507

ASTM E384 Rockwell (HRBW, HRC, HR15N, HR30N, HR15TW, HR30TW) ASTM E18 Concrete Agencies Engaged in Construction Inspection, Testing, or Special Inspection ASTM E329 Compression/Flexural Strength of Concrete Compressive Streng

ASTM E384 Proof (External Threaded) Bolts ASTM A370 (A3.2.1.2), F606/F606M (3.2.3); ISO 898-1 (8.4) Nuts ASTM A370 (A3.5.1), F606/F606M (4.2); ISO 898-2 (8.1); ASME SA370 Rotational Capacity ASTM F3125/F3125M Shear Testi

ASTM E384 ASTM E92 HV0,3, HV1 Matériaux métalliques Essai de dureté Brinell Dureté HB NF EN ISO 6506-1 ASTM E10 ASTM A370 HBW 10/3000 HBW 10/1000 HBW 5/750 MATERIAUX / MATERIAUX METALLIQUES / Essais d’endurance ou de f

ASTM E384 Plating Thickness ASTM B487 Macroetch ASTM E381 Microstructure Analysis ASTM E883 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy (EDS, SEM) ASTM E1508 (Standardless Technique)

ASTM E384, E1077; F2328, SAE J121, J419 Macroetch ASTM E340, AWS D1.1/D1.1M (6.4.10 and 6.23.2), AWS D1.5/D1.5M (7.18.2 and 7.26.3.4) Microetch ASTM E407 Case Depth (Optical, microhardness) ASTM E384; SAE J423 Inclusion Conten t ASTM

ASTM E384-22 ASTM E92-23 _ _ _ Esame macroscopico/Macroscopic examination Esame microscopico/Microscopic examination Prove di trazione a temperatura ambiente/Tensile testing at room temperature (Forze fino a 250 kN) Prove di trazion

ASTM E384; SAE J81, J933, J1237 Fastener Tensile up to 30,000 lbf Axial Wedge Proof Load ASTM F606/F606M; SAE J81, J82, J1216, J1237 ASTM F606/F606M; SAE J81, J82, J1216 ASTM F606/F606M (3.2.3, 3.2.5) ISO 898-1

ASTM E384 SEM (Scanning Electron Microscopy)/EDS (Energy Dispersive Spectroscopy) ASTM E1508 Inclusion Content ASTM E45 (Method A) Determining Average Grain Size ASTM E112 (Comparison and Intercept), E1181 Volume Fraction of Delta Fe

ASTM E384, GM 6010M (Section 3.2) (superseded 8/2011)2, GM 6170M (Section 3.2) (superseded 8/2011)2, GM 6171M (Section 3.2) (superseded 8/2011)2, GMW15170, ISO 898-1, ISO 2702, SAE J419 Torsional Strength GM 6010M (Section 3.5) (s

ASTM E384-22 Micro Vickers (Hv0.3) BS EN ISO 6507-1:2023 ASTM E92-23 Brinell (HBW 10/3000) BS EN ISO 6506-1: 2014 ASTM E10-23 Rockwell (B & C Scales) BS EN ISO 6508-1: 2016 ASTM E18- 24 Impact: Charpy a

ASTM E384-22 ASTM E92-23 ANSI/NACE MR0175:2021/ISO 15156-2:2020/Cir1:2021 EN ISO 6507-1:2023, ISO 6507-1:2023, UNI EN ISO 6507-1:2023 NF A05-152:1984 ASTM E340-23 _ _ _ _ _ _ _ Esame visivo Esame visivo ASTM E3-11(2025) + AST

ASTM E384 -22 2022 Microind entation Hardness of Materials DIN 50190 -3 1979-03 Hardness depth of heat -treated parts – determination of the effective depth of hardening after nitriding DIN 50969 -2 2013-04 Prevention of h

ASTM E384, E92 Durometer (Shore A & D) ASTM D2240 Surface Roughness (Linear) ANSI B46.1 Density/Specific Gravity of Plastics ASTM D792 Metallographic Preperation ASTM E3, E407 Metallographic Evaluation ASM Handboo

ASTM E384, E92; ISO 6507-1 Tensile (Axial Wedge), Proof Load ASTM F606/ F606M; ISO 898 -1, ISO 3506-1; SAE J429 (External Threads) Proof Load (Internally Threaded, Non-Locking, ASTM F606/ F606M; ISO 898-2, ISO 3506-2; SAE J9

ASTM E384/ ASTM E92/ISO 6507-2

ASTM E384-22 Durezza Vickers/Vickers hardness (HV02, HV03, HV05, HV1, HV 5, HV 10, HV 30) ASTM E92-23 Fatica assiale in controllo di carico ad ampiezza costante/Conducting force controlled constant amplitude axial fatigue (1,25 ÷ 250 k

ASTM E384 & E92 Pressure3 – Absolute & Barometric Pressure Differential & Gage Pressure (0 to 35) inꞏHg (0 to 30) inꞏH 2O (0 to 5) psi (5 to 15) psi (10 to 500) psi (200 to 10 000) psi

ASTM E384; SAE J423 Micro-indentation Testing (Vickers, Knoop) 500HK 100HV ASTM E384, E92 Hardness Rockwell and Superficial (HR15N, HR15TW, HRBW, HRA, HRC, HREW) ASTM E18 Metallography Sample Prep ASTM E3 Microstructure

ASTM E384; F606/606M MacroetchTesting ASTM E381; ASTM A604 Measurements of plating thickness by Optical Microscope ASTM B487 Micro-Cleanliness Rating ASTM E45 (Method A, C, D, E); ISO 4967 (Method A and B); DIN 50602 (Method

ASTM E384/E92 Vickers (100, 300, 500 gf) ASTM E384/E92 Met. Preparation & Evaluation ASTM E3; GE: P29TF25 Macroetching/Microetching ASTM E340, E381, E407 Grain Size ASTM E112, E1181, E930; GE: E50TF133 Depth of Decar

ASTM E384 ASTM E92 ASTM E92 Standard Test Methods and Definitions for Mechanical Testing of Steel Products ASTM A370 Bend ASTM E190; AWS D1.1 Ferrite Testing ASTM A800/A800M; ASTM A799; ASTM E562 Depth of Decarburization ASTM E

ASTM E384 Metallographic Preparation ASTM E3 Microetching ASTM E407 Grain Size ASTM E112 Fatigue Crack Growth ASTM E647

ASTM E384, E92 Case Depth (Hardness Method) SAE J78, J81, J1237 Decarburization (Hardness Method) ASTM F2328, F2328M; ISO 898-1 Torsional Strength SAE J78, J81, J933, J1237 Drive Test SAE J81, J933, J1237

ASTM E384 MID Proof loading: Bearings and bushes Proof Loading (Forces up to  400kN) Documented In-House Method developed using procedure EL-AEE-QU-X-LAN-SOP 27020. Documented In-House Method EX-E-OP-FE-LA-MD26980

ASTM E384 ASTM E92 / Sur site Moutons Pendules Flexion par choc Energie de rupture Vérification globale du mouton-pendule par comparaison à des matériaux de référence Charpy V d’énergie de rupture NF EN 10045-2 (abrogée)* ISO 148

ASTM E384 Brinell ASTM E10 Fastener Testing Wedge and Axial Tensile ASTM A370, F606/606M Axial Proof Load (Internal and External Threads) ASTM A370, A962, F606/606M Yield Strength ASTM A370, F606/606M, E8/E8M Chemical Prope

ASTM E384; DIN 7504, DIN 7500, DIN 267-12; SAE J933, SAE J78, SAE J81; ASME B18.6.3; ISO 2702 Case Depth SAE J78, J81, J423, J933, J1237; ISO 2702, 7085(1999); DIN 7500-1 Torsional Strength ASME B18.6.3; FIP1000; SAE J78, J81, J12

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 ON POINT CALIBRATION 6265 Old US Highway 421 Zionville, NC 28698 Heather Tracy Phone: 980 636 4628 CALIBRATION Valid To: June 30, 2026 Cer

ASTM E384, E92, E1077, F2328; ISO 898-1 Hardness (Rockwell C, 15N, 30N) ASTM E18, F606/F606M; ISO 898-1, ISO 898-2 Hardness (Vickers 300g) ASTM E384, E92; ISO 898-1 Proof Load (Externally Threaded Fasteners) ASTM F606/F606M; ISO 898-

ASTM E384; NASM 1312-6; SAE J417 Material Testing: Abrasion Resistance by the Taber Abraser ASTM D4060 Compressive Properties of Rigid Plastics ASTM D695 Durometer Hardness (Shore A, Shore D, Shore OO) ASTM D2240 Flexural