MAC Calibrations
, United States, Unknown, United States
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at MAC Calibrations?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 1795.01Active
Accredited standards
2Our reading of the A2LA scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.
ASTM E1417Name not checked yet
ASTM E1444; ASTM E1417; ISO/IEC 17025-2017; ANSI/NCSL Z540.1-1994
ASTM E1444Name not checked yet
ASTM E1444; ASTM E1417; ISO/IEC 17025-2017; ANSI/NCSL Z540.1-1994
Scope as published by A2LA
6 lines
ISO/IEC 17025
Active1795.01
The scope document we hold says it is valid until 2027-11-30.
Accredited scope, certificate 1795.01
| Line | Discipline | Method | Matrix | Range |
|---|---|---|---|---|
| 1 | electrical | ASTM E1444; ASTM E1417; ISO/IEC 17025-2017; ANSI/NCSL Z540.1-1994 | - | -80 to 300 °C; °F; psig; s |
| 2 | electrical | - | - | to 19990 A |
| 3 | mechanical; optical | - | - | 10 to 200000 lb; nm; µW/cm2; Fc; lux; Fl |
| 4 | dimensional | - | - | -80 to 300 °C; °F; °F; °C; s; min; hrs; s |
| 5 | dimensional | (A2LA Cert. No. 1795.01) 10/01/2025 Page 5 of 5
4 The measurands stated are measured with the HP 34401A. This capability is suitable for the calibration of
the devices intended to generate the measurand in the ranges indicated. CMC’s are expressed as either a
specific value that covers the full range or as a combination of the fraction of the reading/output plus a
range specification.
5 In the statement of CMC, Fc represents “Foot Candle”. L ux represents the standard unit of measuring
how much light is available. Fl represents “Foot Lambert”.
6 This scope meets A2LA’s P112 Flexible scope policy.
7 The type of instrument or material being calibrated is defined by the parameter. This indicates the
laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated
for the listed measurement parameter.
8 Please note that the identities of the location for which this CUSTOMER is accredited has been redacted
and is not publicly available. Consideration of such disclosure to any party may be made upon written
request to A2LA with evidence of a demonstrable need to know and only upon approval by the
CUSTOMER itself. | ||
| 6 | - | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994 | - | - |
Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Eustis Co., Inc./Pyrocom CalibrationLynnwood, WA · ~65 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Robb Precision Tool ServicesLynnwood, WA · ~65 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Cascade Engineering ServicesRedmond, WA · ~73 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- SIMCO Electronics - SeattleRedmond, WA · ~73 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- ThermetricsSeattle, WA · ~86 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.