United States
NI Corporate Metrology
Austin, TX, United States
Visit websiteA2LA 3295.01ISO/IEC 17025Register refreshed 2026-11-06
- Scope lines
- 36
- A2LA certificate
- 1
- Sites in our directory
- 3
A2LA accredited scope
What this lab is accredited for
We found no published test standard numbers in this lab’s scope. The full scope as published is below.
Only this lab. Searches the method, matrix and range of each of the 36 scope lines.
A2LA certificate 3295.01 · 36 lines
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994 | - | See scope document |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 2 of 35
Parameter/Equipment
Range
CMC2, 3, 5 (±)
Comments
DC Voltage – Measure
(cont)
Fixed Points
Fixed Points4
10 V
0.1 V
1 V
100 V
1 kV
0.50 µV/V
1.0 µV/V
0.53 µV/V
0.53 µV/V
0.64 µV/V
Zener reference
group/volt reference
Zener reference
group/reference
divider/null detector
DC Current – Generate
(0 to 1) µA
(1 to 10) µA
0 A
100 nA to 1 µA
(1 to 10) µA
(10 to 15) µA
(15 to 350) µA
350 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
(100 to 550) mA
550 mA to 1 A
(1 to 10) A
25 µA/A + 0.04 nA
25 µA/A + 0.10 nA
1.0 pA
10 µA/A + 1.6 pA
11 µA/A + 10 pA
20 µA/A
15 µA/A
12 µA/A
7.0 µA/A
10 µA/A
22 µA/A
17 µA/A
11 µA/A
DMM using current
source
Open-air circuit
DMM/DC shunts using
current source
DC Current – Measure
(0 to 1) µA
(1 to 10) µA
(10 to 200) µA
200 µA to 2 mA
(2 to 20) mA
(20 to 100) mA
100 mA to 1 A
(1 to 2) A
(2 to 20) A
(10 to 15) µA
(15 to 350) µA
350 µA to 1 mA
(1 to 10) mA
(10 to 100) mA
(100 to 550) mA
550 mA to 1 A
(1 to 10) A
19 µA/A + 31 pA
19 µA/A + 78 pA
12 µA/A + 0.4 nA
12 µA/A + 4 nA
13 µA/A + 40 nA
40 µA/A + 0.5 µA
120 µA/A + 10 µA
170 µA/A + 16 µA
380 µA/A + 0.4 mA
20 µA/A
15 µA/A
12 µA/A
7.0 µA/A
10 µA/A
22 µA/A
17 µA/A
11 µA/A
Reference DMM
DMM/DC shunts | ||
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 3 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
AC Voltage – Generate
600 µV to 2.2 mV
(2.2 to 7) mV
(7 to 22) mV
(22 to 70) mV
(70 to 220) mV
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
0.13 % + 1.0 µV
0.057 % + 1.0 µV
0.033 % + 1.0 µV
0.063 % + 1.6 µV
0.093 % + 1.9 µV
0.18 % + 3.1 µV
0.19 % + 6.2 µV
0.27 % + 6.2 µV
0.066 % + 1.0 µV
0.029 % + 1.0 µV
0.016 % + 1.0 µV
0.031 % + 1.6 µV
0.047 % + 1.9 µV
0.093 % + 3.1 µV
0.10 % + 6.2 µV
0.18 % + 6.2 µV
0.022 % + 1.0 µV
0.015 % + 1.0 µV
85 µV/V + 1.0 µV
0.016 % + 1.6 µV
0.024 % + 1.9 µV
0.063 % + 3.1 µV
0.069 % + 6.2 µV
0.13 % + 6.2 µV
0.019 % + 1.2 µV
93 µV/V + 1.2 µV
50 µV/V + 1.2 µV
0.010 % + 1.6 µV
0.020 % + 1.9 µV
0.040 % + 3.1 µV
0.052 % + 6.2 µV
0.085 % + 6.2 µV
0.016 % + 1.2 µV
66 µV/V + 1.2 µV
29 µV/V + 1.2 µV
53 µV/V + 1.6 µV
0.012 % + 1.9 µV
0.019 % + 3.1 µV
0.029 % + 6.2 µV
0.078 % + 6.2 µV
Reference AC
voltmeter & sources | ||
| 4 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 4 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Generate
(cont)
(220 to 700) mV
700 mV to 2.2 V
(2.2 to 7.0) V
(7.0 to 22) V
(22 to 70) V
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
0.016 % + 1.2 µV
59 µV/V + 1.2 µV
26 µV/V + 1.2 µV
39 µV/V + 1.6 µV
61 µV/V + 1.3 µV
0.014 % + 3.1 µV
0.023 % + 6.2 µV
0.075 % + 6.2 µV
0.016 %
51 µV/V
19 µV/V
36 µV/V
55 µV/V
0.013 %
0.020 %
0.070 %
0.016 %
52 µV/V
19 µV/V
37 µV/V
63 µV/V
0.015 %
0.031 %
0.093 %
0.016 %
52 µV/V
21 µV/V
37 µV/V
63 µV/V
0.015 %
0.031 %
0.093 %
0.016 %
53 µV/V
25 µV/V
44 µV/V
73 µV/V
0.016 %
0.032 %
0.093 %
Reference AC
voltmeter & sources | ||
| 5 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 5 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Generate
(cont)
(70 to 220) V
(220 to 250) V
(220 to 700) V
(700 to 750) V
(750 to 1000) V
(0.3 to 1.1) mV
(1.1 to 3.3) mV
(3.3 to 11) mV
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(15 to 20) Hz
(20 to 40) Hz
(40 to 50) Hz
50 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
50 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
50 Hz to 20 kHz
(20 to 30) kHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
0.016 %
54 µV/V
24 µV/V
53 µV/V
76 µV/V
0.017 %
0.039 %
0.016 %
77 µV/V
32 µV/V
32 µV/V
0.010 %
0.039 %
30 µV/V
0.010 %
0.039 %
30 µV/V
0.010 %
6.4E-3x + 0.32 µV
4.7E-3x + 0.32 µV
5.5E-3x + 2.7 µV
5.5E-3x + 2.7 µV
7.0E-3x + 2.7 µV
8.6E-3x + 2.7 µV
16E-3x + 12 µV
5.9E-3x + 0.79 µV
3.5E-3x + 0.79 µV
4.3E-3x + 3.2 µV
4.3E-3x + 3.2 µV
4.7E-3x + 4.4 µV
6.3E-3x + 4.4 µV
9.4E-3x + 9.6 µV
5.2E-3x + 3.2 µV
3.5E-3x + 3.2 µV
3.5E-3x + 5.5 µV
3.5E-3x + 5.5 µV
4.3E-3x + 5.5 µV
5.9E-3x + 5.5 µV
11E-3x + 5.5 µV
Reference AC
voltmeter & sources
Reference calibrator | ||
| 6 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 6 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Generate
(cont)
(11 to 16.5) mV
(16.5 to 33) mV
(33 to 55) mV
(55 to 110) mV
(110 to 165) mV
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
4.8E-3x + 8.0 µV
3.2E-3x + 8.0 µV
3.2E-3x + 10 µV
3.9E-3x + 10 µV
3.9E-3x + 10 µV
5.5E-3x + 10 µV
11E-3x + 10 µV
4.8E-3x + 8 µV
3.2E-3x + 8 µV
3.2E-3x + 11 µV
3.2E-3x + 11 µV
3.9E-3x + 11 µV
5.5E-3x + 11 µV
10E-3x + 11 µV
4.8E-3x + 35 µV
3.2E-3x + 35 µV
3.2E-3x + 35 µV
3.9E-3x + 35 µV
3.9E-3x + 35 µV
5.5E-3x + 35 µV
11E-3x + 35 µV
4.8E-3x + 35 µV
3.2E-3x + 35 µV
3.2E-3x + 35 µV
3.2E-3x + 35 µV
4.0E-3x + 35 µV
5.5E-3x + 35 µV
11E-3x + 35 µV
4.4E-3x + 80 µV
2.8E-3x + 80 µV
2.8E-3x + 85 µV
3.5E-3x + 85 µV
3.5E-3x + 85 µV
5.1E-3x + 85 µV
9.8E-3x + 85 µV
Reference calibrator | ||
| 7 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 7 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Generate
(cont)
(165 to 330) mV
(330 to 550) mV
550 mV to 1.1 V
(1.1 to 1.75) V
(1.75 to 3.5) V
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 1.2 MHz
(1.2 to 2.0) MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
4.4E-3x + 80 µV
2.8E-3x + 80 µV
2.8E-3x + 80 µV
2.8E-3x + 80 µV
3.6E-3x + 80 µV
5.1E-3x + 80 µV
9.8E-3x + 80 µV
4.4E-3x + 320 µV
2.8E-3x + 320 µV
2.8E-3x + 320 µV
3.6E-3x + 320 µV
3.6E-3x + 320 µV
5.1E-3x + 320 µV
9.8E-3x + 320 µV
4.4E-3x + 320 µV
2.8E-3x + 320 µV
2.8E-3x + 310 µV
2.8E-3x + 310 µV
3.6E-3x + 310 µV
5.1E-3x + 310 µV
9.8E-3x + 310 µV
4.0E-3x + 380 µV
2.4E-3x + 380 µV
2.4E-3x + 400 µV
3.1E-3x + 400 µV
3.1E-3x + 400 µV
4.7E-3x + 400 µV
9.4E-3x + 400 µV
4.0E-3x + 410 µV
2.4E-3x + 410 µV
2.4E-3x + 410 µV
2.4E-3x + 410 µV
3.1E-3x + 410 µV
4.7E-3x + 410 µV
9.4E-3x + 410 µV
Reference calibrator | ||
| 8 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 8 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Measure
600 µV to 2.2 mV
(2.2 to 7) mV
(7 to 22) mV
(22 to 70) mV
(70 to 220) mV
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
0.13 % + 1.0 µV
0.057 % + 1.0 µV
0.033 % + 1.0 µV
0.063 % + 1.6 µV
0.093 % + 1.9 µV
0.18 % + 3.1 µV
0.19 % + 6.2 µV
0.27 % + 6.2 µV
0.066 % + 1.0 µV
0.029 % + 1.0 µV
0.016 % + 1.0 µV
0.031 % + 1.6 µV
0.047 % + 1.9 µV
0.093 % + 3.1 µV
0.10 % + 6.2 µV
0.18 % + 6.2 µV
0.022 % + 1.0 µV
0.015 % + 1.0 µV
85 µV/V + 1.0 µV
0.016 % + 1.6 µV
0.024 % + 1.9 µV
0.063 % + 3.1 µV
0.069 % + 6.2 µV
0.13 % + 6.2 µV
0.019 % + 1.2 µV
93 µV/V + 1.2 µV
50 µV/V + 1.2 µV
0.010 % + 1.6 µV
0.020 % + 1.9 µV
0.040 % + 3.1 µV
0.052 % + 6.2 µV
0.085 % + 6.2 µV
0.016 % + 1.2 µV
66 µV/V + 1.2 µV
29 µV/V + 1.2 µV
53 µV/V + 1.6 µV
0.012 % + 1.9 µV
0.019 % + 3.1 µV
0.029 % + 6.2 µV
0.078 % + 6.2 µV
AC measurement
standard | ||
| 9 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 9 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Measure
(cont)
(220 to 700) mV
700 mV to 2.2 V
(2.2 to 7.0) V
(7.0 to 22) V
(22 to 70) V
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
0.016 % + 1.2 µV
59 µV/V + 1.2 µV
26 µV/V + 1.2 µV
39 µV/V + 1.6 µV
61 µV/V + 1.9 µV
0.014 % + 3.1 µV
0.023 % + 6.2 µV
0.075 % + 6.2 µV
0.016 %
51 µV/V
19 µV/V
36 µV/V
55 µV/V
0.013 %
0.020 %
0.070 %
0.016 %
52 µV/V
19 µV/V
37 µV/V
63 µV/V
0.015 %
0.031 %
0.093 %
0.016 %
52 µV/V
21 µV/V
37 µV/V
63 µV/V
0.015 %
0.031 %
0.093 %
0.016 %
53 µV/V
25 µV/V
44 µV/V
73 µV/V
0.016 %
0.032 %
0.093 %
AC measurement
standard | ||
| 10 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 10 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
AC Voltage – Measure
(cont)
(70 to 220) V
(220 to 700) V
(700 to 1000) V
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
0.016 %
53 µV/V
24 µV/V
54 µV/V
76 µV/V
0.017 %
0.039 %
0.016 %
77 µV/V
32 µV/V
0.010 %
0.039 %
0.016 %
77 µV/V
30 µV/V
0.010 %
0.039 %
AC measurement
standard
Parameter/Equipment
Range
CMC2, 3, 5 (±)
Comments
Resistance – Generate,
Fixed Points
0 Ω
0.1 Ω
1 Ω
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
100 MΩ
1 GΩ
5 GΩ
1.9 Ω
19 Ω
190 Ω
1.9 kΩ
19 kΩ
190 kΩ
1.9 MΩ
19 MΩ
100 nΩ
3.5 µΩ/Ω
1.5 µΩ/Ω
1.0 µΩ/Ω
1.0 µΩ/Ω
1.0 µΩ/Ω
0.6 µΩ/Ω
2.0 µΩ/Ω
4.5 µΩ/Ω
6.0 µΩ/Ω
20 µΩ/Ω
35 µΩ/Ω
0.018 %
80 µΩ/Ω
21 µΩ/Ω
9.0 µΩ/Ω
7.5 µΩ/Ω
7.5 µΩ/Ω
9.0 µΩ/Ω
16 µΩ/Ω
39 µΩ/Ω
Low thermal EMF shunt
Temperature stabilized
resistance standard
Air resistance standards
Multifunction calibrator | ||
| 11 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 11 of 35
Parameter/Equipment
Range
CMC2, 3, 5 (±)
Comments
Resistance – Measure
(0 to 2) Ω
(2 to 20) Ω
(20 to 200) Ω
(200 to 2000) Ω
(2 to 20) kΩ
(20 to 200) kΩ
(200 to 2000) kΩ
(2 to 20) MΩ
(20 to 200) MΩ
2 MΩ to 2 GΩ
(2 to 20) GΩ
(0 to 2) Ω
(2 to 20) Ω
(20 to 200) Ω
200 Ω to 2 kΩ
(2 to 20) kΩ
(20 to 200) kΩ
200 kΩ to 2 MΩ
2 to 20) MΩ
(20 to 200) MΩ
200 MΩ to 1 GΩ
(2 to 5) GΩ
10 kΩ
15 µΩ/Ω + 4 µΩ
9 µΩ/Ω + 14 µΩ
7.5 µΩ/Ω + 50 µΩ
7.5 µΩ/Ω + 0.5 mΩ
7.5 µΩ/Ω + 5 mΩ
7.5 µΩ/Ω + 50 mΩ
8.5 µΩ/Ω + 1 Ω
15 µΩ/Ω + 10 Ω
60 µΩ/Ω + 1 kΩ
150 µΩ/Ω + 0.1 MΩ
530 µΩ/Ω + 10 MΩ
3.1 µΩ/Ω + 0.50 µΩ
3.0 µΩ/Ω + 13 µΩ
2.3 µΩ/Ω + 15 µΩ
2.2 µΩ/Ω + 0.15 mΩ
2.2 µΩ/Ω + 1.2 mΩ
5.2 µΩ/Ω + 30 mΩ
6.5 µΩ/Ω + 0.50 Ω
8.2 µΩ/Ω
25 µΩ/Ω
37 µΩ/Ω
0.024 %
0.70 µΩ/Ω + 1.4 mΩ
Reference DMM
Transfer method
Temperature stabilized
resistance standard
transfer using reference
DMM
Transfer method 1:1
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
AC Current – Measure
10 µA to 1 mA
(1.0 to 10) mA
(10 to 20) Hz
(20 to 40) Hz
(40 to 100) Hz
100 Hz to 1 kHz
(1 to 5) kHz
(5 to 20) kHz
(20 to 30) kHz
(30 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
0.022 %
75 µA/A
40 µA/A
(0.03f
1 + 35) µA/A
(0.002 f1 + 65) µA/A
80 µA/A
90 µA/A
(1.1 x 10-3 f1 + 65) µA/A
0.022 %
70 µA/A
35 µA/A
40 µA/A
55 µA/A
80 µA/A
DMM/AC current shunts | ||
| 12 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 12 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
AC Current – Measure
(cont)
(10 to 20) mA
(20 to 50) mA
(50 to 100) mA
(100 to 200) mA
(200 to 500) mA
(0.5 to 1.0) A
(1.0 to 2.0) A
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
0.022 %
70 µA/A
35 µA/A
40 µA/A
55 µA/A
80 µA/A
0.020 %
70 µA/A
35 µA/A
55 µA/A
80 µA/A
0.022 %
70 µA/A
35 µA/A
55 µA/A
80 µA/A
0.022 %
75 µA/A
35 µA/A
40 µA/A
60 µA/A
85 µA/A
0.022 %
75 µA/A
35 µA/A
40 µA/A
60 µA/A
80 µA/A
0.022 %
70 µA/A
35 µA/A
40 µA/A
60 µA/A
80 µA/A
0.022 %
75 µA/A
35 µA/A
40 µA/A
60 µA/A
0.010 %
DMM/AC current shunts | ||
| 13 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 13 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
AC Current – Measure
(cont)
(2.0 to 5.0) A
(5.0 to 10.0) A
(10 to 20) A
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) kHz
(20 to 30) kHz
(30 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) kHz
(20 to 30) kHz
(30 to 50) kHz
(50 to 100) kHz
0.022 %
70 µA/A
36 µA/A
44 µA/A
70 µA/A
0.010 %
0.022 %
75 µA/A
40 µA/A
(0.002 f
1 + 45) µA/A
65 µA/A
80 µA/A
90 µA/A
0.012 %
0.022 %
80 µA/A
40 µA/A
50 µA/A
60 µA/A
70 µA/A
(7 x 10
-4 f1 + 65) µA/A
(5 x 10-4 f1 + 90) µA/A
DMM/AC current
shunts
AC Current – Generate
10 µA to 1 mA
(1.0 to 10) mA
(10 to 20) mA
(10 to 20) Hz
(20 to 40) Hz
(40 to 100) Hz
100 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
0.022 %
75 µA/A
40 µA/A
(0.03 f
1 + 35) µA/A
(0.002 f1 + 65) µA/A
80 µA/A
0.022 %
70 µA/A
35 µA/A
40 µA/A
0.022 %
70 µA/A
35 µA/A
40 µA/A
AC current source w/
DMM/AC current
shunts | ||
| 14 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 14 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
AC Current – Generate
(cont)
(20 to 50) mA
(50 to 100) mA
(100 to 200) mA
(200 to 500) mA
(0.5 to 1.0) A
(1.0 to 2.0) A
(2.0 to 5.0) A
(5.0 to 10.0) A
(10 to 11) A
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 10 kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 10 kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) Hz
(20 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) Hz
(20 to 500) Hz
500 Hz to 10 kHz
(40 to 500) Hz
500 Hz to 10 kHz
(40 to 500) Hz
500 Hz to 10 kHz
(40 to 500) Hz
500 Hz to 10 kHz
0.022 %
70 µA/A
35 µA/A
0.022 %
70 µA/A
35 µA/A
0.022 %
75 µA/A
35 µA/A
40 µA/A
0.022 %
75 µA/A
35 µA/A
40 µA/A
0.022 %
70 µA/A
35 µA/A
40 µA/A
75 µA/A
35 µA/A
40 µA/A
36 µA/A
44 µA/A
40 µA/A
(0.002 f
1 + 45) µA/A
40 µA/A
50 µA/A
AC current source w/
DMM/AC current
shunts | ||
| 15 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 15 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
Capacitance – Generate,
Fixed Points
0.5 pF to 1 µF
10 µF
100 µF
1 mF
10 µF
100 µF
1 mF
100 pF
(0.05 to 20) kHz
100 Hz
1 kHz
100 Hz
1 kHz
(91 & 100) Hz
(70 to 300) Hz
300 Hz to 1 kHz
(70 to 300) Hz
300 Hz to 1 kHz
20 Hz to 1 kHz
100 Hz
1 kHz
10 kHz
See table 1
0.040 %
0.027 %
0.035 %
0.026 %
0.065 %
0.041 %
0.030 %
0.039 %
0.032 %
0.070 %
5.0 µF/F
1.1 µF/F
3.1 µF/F
Standard capacitors &
reference capacitance
bridge
Standard capacitors
Fused-silica standard
capacitor | ||
| 16 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 16 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
Capacitance – Measure
Fixed Points
1 pF
10 pF
100 pF
1 nF
10 nF
100 nF
1 µF
10 µF
100 µF
1 mF
Continuous
(1 to 10) pF
(10 to 100) pF
100 pF to 1 nF
(1 to 10) nF
(10 to 100) nF
100 nF to 1 µF
(1 to 10) µF
(10 to 100) µF
100 µF to 1 mF
0.5 pF to 1 µF
(1 to 10) kHz
(1 to 10) kHz
(1 to 10) kHz
90 Hz to 10 kHz
90 Hz to 10 kHz
90 Hz to 10 kHz
90 Hz to 10 kHz
90 Hz to 1 kHz
90 Hz to 1 kHz
(90 to 100) Hz
(1 to 10) kHz
(1 to 10) kHz
(1 to 10) kHz
90 Hz to 10 kHz
90 Hz to 10 kHz
90 Hz to 10 kHz
90 Hz to 10 kHz
90 Hz to 1 kHz
90 Hz to 1 kHz
(0.05 to 20) kHz
0.070 %
0.063 %
0.021 %
0.017 %
0.017 %
0.017 %
0.018 %
0.046 %
0.076 %
0.096 %
0.070 %
0.063 %
0.021 %
0.017 %
0.017 %
0.017 %
0.018 %
0.046 %
0.076 %
See table 1
Transfer method 1:1
standard capacitors &
RLC bridge
Transfer method 1:10
standard capacitors &
RLC bridge
Direct method
capacitance bridge
Inductance –
Generate/Measure
(5 to 1) H
>1 H to 500 µH
(>500 to 100) µH
(>100 to 10) µH
(0.05 to 10) kHz
(0.05 to 15) kHz
(0.05 to 20) kHz
(0.05 to 20) kHz
3.5 %
3.5 %
3.8 %
4.5 %
Standard inductance &
reference inductance
bridge | ||
| 17 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 17 of 35
II. Electrical – RF/Microwave
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
RF Absolute Power –
Measure
1 mW
(1 to 10) mW
50 MHz
100 kHz to 1.25 MHz
(>1.25 to 10) MHz
(>10 to 80) MHz
(>80 to 1600) MHz
(>1.6 to 4.6) GHz
(>4.6 to <12) GHz
(12 to 14.75) GHz
(>14.75 to 17.25) GHz
(>17.25 to 18) GHz
(10 to 40) MHz
(>40 to 1000) MHz
(>1 to 2.5) GHz
(>2.5 to 18) GHz
(>18 to 22) GHz
(>22 to 25) GHz
(>25 to 26.5) GHz
0.36 %
0.40 f
2 -0.12 %
0.38 %
(1.4 x 10
-3 f2 + 0.33) %
0.37 %
0.42 %
0.47 %
0.61 %
0.52 %
0.61 %
3.7 f
2 -0.53 %
0.50 %
0.60 %
(5.2 x 10
-5 f2 + 0.50) %
1.7 %
2.1 %
2.4 %
Thermistor mount
power standard &
power meter
Type N thermistor
mount power standard
& power meter
taking into
consideration a DUT
VSWR = 1.1
Type 2.92 mm
connector thermistor
mount power
standard & power
meter taking into
consideration a DUT
VSWR = 1.1
RF Absolute Power –
Generate
(1 to 10) mW
(100 to 500) kHz
(>0.5 to 40) MHz
(>40 to <90) MHz
(90 to 1600) MHz
(>1.6 to 4.6) GHz
(>4.6 to 12) GHz
(>12 to <15) GHz
(15 to 17.5) GHz
(>17.5 to 18) GHz
(10 to 50) MHz
(>50 to 1000) MHz
(>1 to 2.9) GHz
(>2.9 to 18) GHz
(>18 to 22) GHz
(>22 to 26.5) GHz
0.41 f2 -0.12 %
0.44 %
0.47 %
0.42 %
0.45 %
0.51 %
0.65 %
0.56 %
0.63 %
3.0 f
2-0.44 %
0.60 %
0.65 %
(5.5 x 10-5 f2 + 0.50) %
1.8 %
2.5 %
Type N RF transfer
standard & power
meter, taking into
consideration a DUT
VSWR = 1.1
Type 2.92 mm
connector thermistor
mount power
standard & power
meter taking into
consideration a DUT
VSWR = 1.1 | ||
| 18 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 18 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
RF Absolute Power –
Generate4 (cont)
(0.01 to 100) mW
9 kHz to 1 MHz
(>1 to 100) MHz
(>0.1 to 2.25) GHz
(>2.25 to 8) GHz
(>8 to 12) GHz
(>12 to 18) GHz
0.28 %
0.33 %
0.51 %
0.67 %
0.84 %
1.1 %
R&S NRPC18
RF Absolute Power –
Measure & Generate
(0.5 to 10) mW
100 kHz to 100 MHz
>100 MHz to 2 GHz
(>2 to 8) GHz
(>8 to 12) GHz
(>12 to 18) GHz
(>18 to 26.5) GHz
(>26.5 to 40) GHz
0.60 %
0.85 %
1.0 %
1.3 %
1.7 %
1.4 %
1.5 %
2.92 mm connector
RF transfer standard
& power meter,
taking into
consideration a
DUT VSWR = 1.0
Tuned RF Absolute
Power4 – Measure
(26 to 20) dBm
20 Hz to 2 GHz
(2 to 8) GHz
(8 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
0.055 dB
0.060 dB
0.065 dB
0.070 dB
0.080 dB
0.095 dB
0.085 dB
0.090 dB
0.085 dB
0.095 dB
0.11 dB
0.10 dB
0.095 dB
0.11 dB
0.095 dB
0.10 dB
0.090 dB
0.095 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | ||
| 19 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 19 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(20 to -5) dBm
(-5 to -10) dBm
20 Hz to 5 MHz
5 MHz to 2 GHz
(2 to 8) GHz
(8 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 5 MHz
5 MHz to 2 GHz
(2 to 8) GHz
(8 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
0.050 dB
0.055 dB
0.060 dB
0.065 dB
0.070 dB
0.080 dB
0.095 dB
0.085 dB
0.090 dB
0.085 dB
0.095 dB
0.11 dB
0.10 dB
0.095 dB
0.11 dB
0.095 dB
0.10 dB
0.090 dB
0.095 dB
0.050 dB
0.055 dB
0.060 dB
0.065 dB
0.070 dB
0.080 dB
0.095 dB
0.085 dB
0.090 dB
0.085 dB
0.095 dB
0.11 dB
0.10 dB
0.095 dB
0.12 dB
0.095 dB
0.10 dB
0.090 dB
0.095 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | ||
| 20 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 20 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(-10 to -20) dBm
(-20 to -30) dBm
20 Hz to 2 GHz
(2 to 8) GHz
(8 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 5 MHz
5 MHz to 2 GHz
(2 to 8) GHz
(8 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
0.055 dB
0.060 dB
0.065 dB
0.070 dB
0.080 dB
0.095 dB
0.085 dB
0.090 dB
0.085 dB
0.095 dB
0.11 dB
0.10 dB
0.095 dB
0.12 dB
0.095 dB
0.10 dB
0.090 dB
0.095 dB
0.055 dB
0.060 dB
0.065 dB
0.065 dB
0.070 dB
0.080 dB
0.095 dB
0.085 dB
0.095 dB
0.085 dB
0.095 dB
0.11 dB
0.10 dB
0.095 dB
0.11 dB
0.095 dB
0.10 dB
0.090 dB
0.095 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | ||
| 21 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 21 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(-30 to -40) dBm
(-40 to -43.5) dBm
20 Hz to 2 GHz
(2 to 8) GHz
(8 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 23) GHz
(23 to 23.5) GHz
(23.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 5 MHz
5 MHz to 2 GHz
(2 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
0.060 dB
0.065 dB
0.070 dB
0.085 dB
0.095 dB
0.090 dB
0.095 dB
0.085 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.10 dB
0.095 dB
0.10 dB
0.060 dB
0.065 dB
0.070 dB
0.075 dB
0.085 dB
0.10 dB
0.090 dB
0.095 dB
0.090 dB
0.10 dB
0.11 dB
0.10 dB
0.10 dB
0.11 dB
0.10 dB
0.095 dB
0.10 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | -40 to -30 dBm |
| 22 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 22 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(-43.5 to -50) dBm
(-50 to -60) dBm
20 Hz to 2 GHz
(2 to 8) GHz
(8 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 5 MHz
5 MHz to 2 GHz
(2 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26.5) GHz
0.065 dB
0.070 dB
0.075 dB
0.075 dB
0.085 dB
0.10 dB
0.095 dB
0.10 dB
0.090 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.10 dB
0.095 dB
0.10 dB
0.065 dB
0.070 dB
0.075 dB
0.080 dB
0.090 dB
0.10 dB
0.095 dB
0.10 dB
0.095 dB
0.10 dB
0.12 dB
0.11 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.10 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | -50 to -43.5 dBm |
| 23 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 23 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(-60 to -70) dBm
(-70 to -80) dBm
(-80 to -90) dBm
20 Hz to 5 MHz
5 MHz to 8 GHz
(8 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 2 GHz
(2 to 8) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 23) GHz
(23 to 23.5) GHz
(23.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 2 GHz
(2 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 23) GHz
(23 to 23.5) GHz
(23.5 to 26.5) GHz
0.070 dB
0.075 dB
0.080 dB
0.090 dB
0.10 dB
0.095 dB
0.10 dB
0.095 dB
0.10 dB
0.12 dB
0.11 dB
0.10 dB
0.12 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.075 dB
0.080 dB
0.085 dB
0.095 dB
0.11 dB
0.10 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
0.10 dB
0.11 dB
0.080 dB
0.085 dB
0.090 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | ||
| 24 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 24 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(-90 to -100) dBm
(-100 to -110) dBm
(-110 to -120) dBm
20 Hz to 5 MHz
5 MHz to 8 GHz
(8 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26.5) GHz
20 Hz to 5 MHz
5 MHz to 8 GHz
(8 to 12) GHz
(12 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 22.5) GHz
(22.5 to 23) GHz
(23 to 23.5) GHz
(23.5 to 24.5) GHz
(24.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
20 Hz to 2 GHz
(2 to 9) GHz
(9 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 23) GHz
(23 to 23.5) GHz
(23.5 to 25) GHz
(25 to 26) GHz
(26 to 26.5) GHz
0.080 dB
0.085 dB
0.090 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.10 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
0.085 dB
0.090 dB
0.095 dB
0.11 dB
0.12 dB
0.13 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.090 dB
0.095 dB
0.10 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.13 dB
0.12 dB
0.13 dB
0.12 dB
0.11 dB
0.12 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1 | ||
| 25 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 25 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Absolute
Power – Measure (cont)
(-120 to -125) dBm
20 Hz to 2 GHz
(2 to 12) GHz
(12 to 12.5) GHz
(12.5 to 14) GHz
(14 to 14.5) GHz
(14.5 to 15) GHz
(15 to 18.5) GHz
(18.5 to 21.5) GHz
(21.5 to 22) GHz
(22 to 23) GHz
(23 to 23.5) GHz
(23.5 to 26.5) GHz
0.095 dB
0.10 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.11 dB
0.12 dB
0.13 dB
0.12 dB
0.13 dB
0.12 dB
Thermoelectric
power sensor &
measurement receiver
taking into
consideration a DUT
VSWR = 1.1
Tuned RF Relative Power
– Measure
(25 to 20) dBm
(20 to 10) dBm
(10 to -3) dBm
(-3 to -10) dBm
(-10 to -20) dBm
(-20 to -30) dBm
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 20 GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
0.025 dB
0.030 dB
0.040 dB
0.11 dB
0.020 dB
0.030 dB
0.040 dB
0.11 dB
0.020 dB
0.025 dB
0.040 dB
0.11 dB
0.020 dB
0.030 dB
0.040 dB
0.12 dB
0.030 dB
0.040 dB
0.12 dB
0.025 dB
0.035 dB
0.045 dB
0.13 dB
Measurement
receiver taking into
consideration a DUT
VSWR = 1.1 | ||
| 26 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 26 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Relative Power
– Measure (cont)
(-30 to -40) dBm
(-40 to -43) dBm
(-43 to -50) dBm
(-50 to -60) dBm
(-60 to -70) dBm
(-70 to -80) dBm
(-80 to -90) dBm
(-90 to -100) dBm
(-100 to -110) dBm
(-110 to -120) dBm
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 20 GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 20 GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 20 GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 20 GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
0.025 dB
0.040 dB
0.045 dB
0.13 dB
0.040 dB
0.045 dB
0.050 dB
0.13 dB
0.045 dB
0.050 dB
0.055 dB
0.16 dB
0.050 dB
0.060 dB
0.16 dB
0.055 dB
0.060 dB
0.17 dB
0.060 dB
0.065 dB
0.17 dB
0.065 dB
0.070 dB
0.17 dB
0.065 dB
0.070 dB
0.075 dB
0.18 dB
0.070 dB
0.075 dB
0.080 dB
0.18 dB
0.075 dB
0.080 dB
0.085 dB
0.19 dB
Measurement
receiver taking into
consideration a DUT
VSWR = 1.1 | ||
| 27 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 27 of 35
Parameter/Range
Frequency
CMC2, 4, 5 (±)
Comments
Tuned RF Relative Power
– Measure (cont)
(-120 to -130) dBm
20 Hz to 11 GHz
(11 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
0.080 dB
0.085 dB
0.090 dB
0.18 dB
Measurement
receiver taking into
consideration a DUT
VSWR = 1.1
Reflection S11/S22 –
Measure
Reflection Coefficient
(0 to 1)
70 kHz to 10 MHz
10 MHz to 2.5 GHz
(2.5 to 20) GHz
(20 to 40) GHz
(40 to 65) GHz
(65 to 67) GHz
(67 to 70) GHz
0.011 lin
± 0.74°
0.011 lin
± 0.63°
0.006 lin
± 0.73°
0.007 lin
± 0.41°
0.011 lin
± 0.36°
0.011 lin
± 0.62°
0.012 lin
± 0.31°
Vector network
analyzer; Anritsu
vector star | ||
| 28 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 28 of 35
Parameter/Range
Frequency
CMC2, 3, 5 (±)
Comments
Reflection S11/S22 – Measure
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
9 kHz to 50 MHz
50 MHz to 2 GHz
(2 to 8.5) GHz
0.0027 lin
0.80°
0.0027 lin
0.50°
0.0035 lin
0.30°
0.0025 lin
0.80°
0.0026 lin
0.40°
0.0035 lin
0.30°
0.0025 lin
0.80°
0.0028 lin
0.40°
0.0039 lin
0.30°
Vector network
analyzer R&S
ZNB8
(N connector)
Reflection S11/S22 – Measure
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
(10 to 60) MHz
0.018 - (2.0 x 10-10) f1 lin
3.9 - (5.0 x 10-8) f1°
0.0252 - (3.2 x 10-10) f1 lin
2.9 - (4.0 x 10-8) f1°
0.042 - (6 x 10
-10) f1 lin
2.7 - (3.8 x 10-8) f1°
Vector network
analyzer R&S
ZVA67
(2.92 mm
connector) | ||
| 29 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 29 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
Reflection S11/S22 – Measure
(cont)
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
60 MHz to 20 GHz
20 GHz to 40 GHz
0.0028 lin
0.80°
0.0030 lin
0.50°
0.0040 lin
0.40°
0.0050 lin
1.4°
0.0050 lin
0.80°
0.0070 lin
0.70°
Vector network
analyzer R&S
ZVA67 (2.92
mm connector)
Reflection S11/S22 – Measure
Reflection Coefficient (0 to
0.4)
Reflection Coefficient (>0.4
to 0.6)
Reflection Coefficient (>0.6
to 1)
(60 to 90) GHz
0.0085 lin
1.9°
0.0085 lin
1.1°
0.0090 lin
1.1°
Vector network
analyzer R&S
ZVA67
With ZC90 WR-
12
Transmission S21/S12 – Measure
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
9 kHz to 10 MHz
0.025 dB
0.20°
0.050 dB
0.40°
0.34 - (2.5x10
-8) f1 dB
2.2 - (1.7x10-7) f1°
Vector network
analyzer R&S
ZNB8 (N
connector) | ||
| 30 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 30 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
Transmission S21/S12 – Measure
(cont)
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
10 MHz to 8.5 GHz
0.025 dB
0.15°
0.028 dB
0.20°
0.12 dB
0.80°
Vector
network
analyzer R&S
ZNB8 (N
connector)
Transmission S21/S12 – Measure
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
(10 to 50) MHz
(50 to 100) MHz
100 MHz to 1 GHz
1 GHz to 23 GHz
0.7 dB
3.5°
2.5 dB
18°
52e - (-7.1 x 10
-8) f1 dB
316e - (-6.1 x 10-8) f1°
0.090 dB
0.70°
0.18 dB
1.2°
2.5 - (2 x 10
-8) f1 dB
16 - (1.3 x 10-7) f1°
0.035 dB
0.20°
0.055 dB
0.40°
0.490 - (3.7 x 10
-10) f1 dB
3.1 - (2.3 x 10-9) f1°
0.030 dB
0.35°
0.035 dB
0.35°
0.17 dB
1.1°
Vector
network
analyzer R&S
ZVA67
(2.92 mm
connector) | ||
| 31 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 31 of 35
Parameter/Range
Frequency
CMC2, 3, 4, 5 (±)
Comments
Transmission S21/S12 –
Measure (cont)
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
23 GHz to 40 GHz
0.045 dB
0.60°
0.080 dB
0.70°
0.70 dB
4.5°
Vector
network
analyzer R&S
ZVA67
(2.92 mm
connector)
Transmission S21/S12 – Measure
Transmission Level
(0 to 20) dB
Transmission Level
(>20 to 40) dB
Transmission Level
(>40 to 60) dB
(60 to 90) GHz
0.035 dB
-0.30 + (2.6 x 10
-11) f1°
0.040 dB
-0.30 + (2.6 x 10
-11) f1 °
0.080 dB
-0.30 + (2.6 x 10
-11) f1°
Vector
betwork
Analyzer R&S
ZVA67
With ZC90
WR-12
Transmission S12/S21 – Measure
Transmission Coefficient
(0 to 1)
70 kHz to 10 MHz
10 MHz to 2.5 GHz
(2.5 to 20) GHz
(20 to 40) GHz
(40 to 65) GHz
(65 to 67) GHz
(67 to 70) GHz
0.005 lin
± 0.13°
0.005 lin
± 0.13°
0.004 lin
± 0.27°
0.009 lin
± 0.28°
0.013 lin
± 0.39°
0.013 lin
± 0.39°
0.016 lin
± 0.47°
Vector
network
analyzer;
Anritsu vector
star | ||
| 32 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 32 of 35
Parameter/Range
Frequency
CMC2, 5 (±)
Comments
Transition Time –
Measure
(10 to 90) %
100 Hz to 10 GHz
t >12 ps
5.0 ps
High BW sampling
scope
Phase Noise
Measurement4 –
1 MHz to 26.5 GHz
(1 to 100) Hz offset
100 Hz to 10 MHz offset
(10 to 30) MHz offset
3.0 dB
1.0 dB
3.0 dB
PLL method with
cross-correlation
measurement system
III. Thermodynamics
Parameter/Equipment
Range
CMC2, 3, 6 (±)
Comments
Temperature – Measure
(-200 to -80) °C
(-80 to -38.8) °C
(-38.8 to 232) °C
(232 to 660) °C
15 m °C
(-0.073t + 9.2) x 10
-3 °C
12 m °C
(0.019t + 7.5) x 10
-3 °C
PRT probe w/
readout
Temperature –
Measuring Equipment
(-10 to 0.01) °C
(0.01 to 120) °C
30 m °C
25 m °C
PRT probe & dry
well | 10 to 90 % |
| 33 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 33 of 35
IV. Time & Frequency
Parameter/Range
Frequency
CMC2, 3, 6 (±)
Comments
Frequency – Measure
1 mHz to 10 Hz
10 Hz to 100 kHz
100 kHz to 10 MHz
10 MHz to 20 GHz
1.6 µHz
3.0 µHz
2.6 x 10
-12 f1 + 2.5 µHz
3.0 pHz/Hz
Counter externally
locked to GPS
disciplined rubidium
oscillator
Frequency – Measuring
Equipment
Fixed Point
10 MHz
1 mHz to 10 Hz
10 Hz to 100 kHz
100 kHz to 10 MHz
10 MHz to 20 GHz
1.2 pHz/Hz
1.6 µHz
3.0 µHz
2.6 x 10
-12. f1 + 2.5 µHz
3.0 pHz/Hz
GPS disciplined
rubidium oscillator
Sources monitored
by counter externally
locked to GPS
disciplined rubidium
oscillator
______________________
1 Commercial calibration service is sometimes available for this laboratory.
2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent
expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage
factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory
may be greater than the CMC due to the behavior of the customer’s device and to influences from the
circumstances of the specific calibration.
3 In the statement of CMC, percentages are defined as the percentage of reading; f1 represents the frequency
of the measurement in Hz; f 2 represents the frequency of the measurement in MHz; t represents
temperature measured in °C.
4 CMC components that can be reasonably attributed to the unit under test have not been utilized in the
calculation of the CMC value for this measurement parameter.
5 The stated measured values are determined using the indicated instrument (see Comments). This capability
is suitable for the calibration of the devices intended to measure or generate the measured value in the
ranges indicated. CMC’s are expressed as either a specific value that covers the full range or as a percent
or fraction of the reading plus a fixed floor specification.
6 The type of instrument or material being calibrated is defined by the parameter. This indicates the
laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated
for the listed measurement parameter.
7 This scope meets A2LA’s P112 Flexible Scope Policy. | ||
| 34 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 34 of 35
Table 1 CMC in (µF/F)
Cap. [F] 0.5-
0.8
0.8-
1.5 1.5-3 3-7 7-15
15-
40
40 -
2000 2-4 4-6.6
6.6-
16.6
16.6-
56 56-90
90-
150
150-
250
250-
400
400-
600
0.6 -
1.6
Frequency
(Hz) (pF) (pF) (pF) (pF) (pF) (pF) (pF) (nF) (nF) (nF) (nF) (nF) (nF) (nF) (nF) (nF) (µF)
50 20 17 16 15 15 15 15 15 14 120 220 320 320 420 420 420 620
60 17 15 14 13 13 13 13 13 13 96 180 260 260 350 350 350 520
70 15 14 13 12 12 12 12 12 12 83 160 230 230 300 300 300 440
80 14 12 11 11 11 11 11 11 11 74 140 200 200 260 260 260 390
100 12 11 10 9.6 9.5 9.4 9.4 9.4 9.4 60 110 160 160 210 210 210 310
120 11 9.8 9.2 8.8 8.6 8.5 8.5 8.5 8.5 51 93 140 140 180 180 180 260
140 10 9.1 8.5 8.1 8.0 7.9 7.9 7.9 7.9 44 81 120 120 150 150 150 230
160 9.7 8.5 8.0 7.7 7.6 7.5 7.5 7.5 7.5 39 72 100 100 140 140 140 200
200 8.8 7.8 7.3 7.0 6.9 6.8 6.8 6.8 6.8 33 59 85 85 110 110 110 160
240 8.2 7.3 6.9 6.6 6.5 6.4 6.4 6.4 6.4 28 51 73 73 95 95 95 140
300 7.7 6.8 6.4 6.2 6.1 6.0 6.0 6.0 6.0 24 42 61 61 79 79 79 120
400 7.2 6.4 6.0 5.8 5.9 5.7 5.7 5.7 5.6 20 35 49 49 64 64 64 93
500 7.0 6.2 5.8 5.6 5.7 5.5 5.4 5.4 5.4 18 30 43 43 56 56 56 81
600 6.9 6.1 5.7 5.5 5.5 5.3 5.3 5.3 5.3 17 28 39 39 51 51 51 74
700 6.9 6.0 5.6 5.4 5.5 5.3 5.3 5.3 5.3 16 27 37 37 48 48 49 70
800 6.9 6.0 5.6 5.4 5.4 5.2 5.2 5.2 5.2 15 26 36 36 47 47 47 69
1.00E+03 7.1 6.1 5.7 5.4 5.4 5.2 5.2 5.2 5.2 15 25 35 36 46 46 47 68
1.20E+03 7.3 6.3 5.8 5.5 5.5 5.3 5.2 5.2 5.2 15 26 36 36 47 47 48 71 | ||
| 35 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 3295.01) Revised 02/12/2025 Page 35 of 35
Table 1 CMC in (µF/F)
Cap. [F] 0.5-
0.8
0.8-
1.5 1.5-3 3-7 7-15
15-
40
40 -
2000 2-4 4-6.6
6.6-
16.6
16.6-
56 56-90
90-
150
150-
250
250-
400
400-
600
0.6 -
1.6
Frequency
(Hz) (pF) (pF) (pF) (pF) (pF) (pF) (pF) (nF) (nF) (nF) (nF) (nF) (nF) (nF) (nF) (nF) (µF)
1.40E+03 7.7 6.5 5.9 5.6 5.5 5.3 5.3 5.3 5.3 16 27 37 38 49 50 51 76
1.60E+03 8.1 6.7 6.1 5.7 5.7 5.4 5.4 5.4 5.4 17 28 39 40 52 53 55 82
2.00E+03 9.1 7.4 6.5 6.0 5.9 5.6 5.6 5.6 5.6 18 31 44 45 59 61 64 98
2.40E+03 10 8.1 7.1 6.4 6.2 5.9 5.8 5.8 5.9 20 34 50 51 68 70 76 120
3.00E+03 12 9.5 8.0 7.0 6.7 6.3 6.2 6.3 6.3 23 40 59 61 82 87 97 160
4.00E+03 17 12 10 8.4 7.8 7.0 6.9 7.1 7.2 29 51 76 80 110 120 140 230
5.00E+03 23 16 12 10 9.1 7.9 7.6 8.0 8.2 35 63 95 100 150 160 200 340
6.00E+03 30 20 15 12 10 8.9 8.5 9.2 9.5 41 75 120 130 190 210 270 470
7.00E+03 39 25 18 14 12 10 9 10 11 48 88 140 160 230 270 360 630
8.00E+03 48 31 22 16 14 11 10 12 13 55 100 160 190 290 340 460 830
1.00E+04 71 44 31 22 18 14 13 15 17 69 130 220 260 410 510 720 1320
1.20E+04 99 61 41 28 23 17 15 19 21 85 160 280 350 570 730 1000 2000
1.40E+04 130 80 53 35 28 20 18 24 27 100 200 360 460 760 1000 1500 2800
1.60E+04 170 100 67 44 34 24 21 29 34 120 240 440 580 990 1300 2000 3800
20 000 260 150 99 64 48 32 28 43 52 160 320 640 890 1500 2100 3300 6400 | ||
| 36 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Other Locations
2 other sites in this organization
Labs with overlapping accredited scope in United States
- Aalberts IPSAPageland, SCA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- AALFA - KAL Metrology Laboratory, division of AALBORG Instruments & ControlsOrangeburg, NYA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- ACR Technical ServicesNewport News, VAA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- AH Electronic Test Equipment Repair CenterIslip, NYA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Aldinger Company DBA Quality Control ServicesMilwaukie, ORA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.