7 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform ISO 7637-2 testing. From the accredited scope text: “ISO 7637-2:2004 A, B ISO 7637-2:2011 A, B 3.9 Mains Dips and Interruptions EN 61000-4-11:2004 A1:2017 A, B EN 61000-4-29:2001 A, B EN IEC 61000-4-11:2020 Single phase supply <=16A Only A, B IEC 61000-” “ISO 7637-2:1990 12 and 24 V ISO 7637-2:2004, pulses 1, 2a, 2b, Emissions and 3a, 3b and 4 only ISO 16750-2:2012 Section 4.6.3 (starting profile) and 4.6.4 (load dump) Immunity 2004/104/EC Annexes X Co” “ISO 7637-2:1990 (pulses 1, 2, 3a, 3b and 5) ISO 7637-2:2011 ISO 7637-3: 2007 ISO 7637-3:2016 (excluding DCC method) ISO 11452-2:2012 (pulses 4, 5a, 5b load dump)” “ISO 7637-2:1990 and Voltage Tests ISO 7637-2:2011 ISO 7637-2:2004 ISO 7637-3:1995 ISO 7637-3:2007 ISO 7637-3:2016 Ford ES-XW7T-1A278-AB:1999 Section CI 210, CI 220, CI 230 CI 240, CI 250, CI 260 & CI”
Hampshire, GB
ISO 7637-2:2004 A, B ISO 7637-2:2011 A, B 3.9 Mains Dips and Interruptions EN 61000-4-11:2004 A1:2017 A, B EN 61000-4-29:2001 A, B EN IEC 61000-4-11:2020 Single phase supply <=16A Only A, B IEC 61000-4-11:ed 2
Warwick, GB
ISO 7637-2:1990 12 and 24 V ISO 7637-2:2004, pulses 1, 2a, 2b, Emissions and 3a, 3b and 4 only ISO 16750-2:2012 Section 4.6.3 (starting profile) and 4.6.4 (load dump) Immunity 2004/104/EC Annexes X Components/ESA 2005/83
Northamptonshire, GB
ISO 7637-2:1990, except Pulses 1, 12 and 24 v 2, 5 Emissions and Immunity ISO 7637-2:2004 ISO 7637-2: 2011 ISO 7637-3:1995 Harmonics & Flicker ISO 7637-3: 2007 Burst & Surge ISO 7637-3:2016 ISO 16
Essex, GB
ISO 7637-2:2004 + A1:2008 2.4 Automotive Conducted Immunity - BCI 1 to 400 MHz Up to 100mA ISO 11452-4:2005 2.5 Transient Immunity UNECE Reg 10.5 Conducted immunity on supply l
West Midlands, GB
ISO 7637-2:1990 and Voltage Tests ISO 7637-2:2011 ISO 7637-2:2004 ISO 7637-3:1995 ISO 7637-3:2007 ISO 7637-3:2016 Ford ES-XW7T-1A278-AB:1999 Section CI 210, CI 220, CI 230 CI 240, CI 250, CI 260 & CI 270 U
Chelmsford, GB
ISO 7637-2:1990 (pulses 1, 2, 3a, 3b and 5) ISO 7637-2:2011 ISO 7637-3: 2007 ISO 7637-3:2016 (excluding DCC method) ISO 11452-2:2012 (pulses 4, 5a, 5b load dump)
Essex, GB
ISO 7637-2:2004 Emissions and Immunity Pulses 1, 2a, 2b, 3a, 3b & 4 12 and 24 v Systems UN Regulation no. 10 Revision 4 UN Regulation no. 10 Revision 5 UN Regulation no. 10 Revision 6
This page is a fixed slice of the register: every ISO 7637-2 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.