ISO 7637-2 Accredited Testing Labs in United States

ISO 7637-2 Oscilloscope, voltage probe, 50 Ω & 1000 Ω load terminations RF Test Generators – Power Level Output Power Level Input Amplifier Gain (10 kHz to 1 GHz) 250 kHz to 1.0 GHz 250 kHz to 1.0 GHz

ISO 7637-2; ISO 7637-2: 2004; ISO 7637-3

Parameter/Range Frequency CMC2, 4, 11 (±) Comments Frequency Modulation – Generate 3 FM Flatness Carrier Frequency: (11 to 13.5) MHz (88 to 108) MHz (352 to 432) MHz Rate Frequency: DC to 1

ISO 7637-2; SAE J1113-42 Electrical Transient Conduction Along Supply Lines Only ISO 7637-2; GB/T 21437.2; SAE J1113-11 Conducted Transient Immunity on Non-Supply Lines ISO 7637-3; GB/T 21437.3; SAE J1113-1

ISO 7637-2 ISO 16750-2, UL1449, GR1089 Tektronix TDS5104 w/high voltage deferential probe & current probe Flicker & Harmonics – Measure Voltage Fluctuations (Flicker) Mains Harmonic Emissions 230V,

ISO 7637-2 Conducted Transient Disturbances, Other than Supply Lines ISO 7637-3 Electrical Loads ISO 16750-2 Emissions Harmonics and Flicker EN 61000-3-2; IEC 61000-3-2; AS/NZS 61000.3.2; SANS 61000-3-2; EN 61000-3-3; IEC

ISO 7637-2; SAE J1113-11 Electrical Disturbance by Conduction and Coupling/Electrical Interference by Conduction and Coupling ISO 7637-3; SAE J1113-12 Immunity to Magnetic Fields ISO 11452-8 Conducted Transient Emissions IS

ISO 7637-2 (2004, 2011); ISO 7637-2; ECE Regulation 10.06, Annex 10 Immunity Bulk Current Injection (BCI) ISO 11452-4 (2005); ISO 11452-4 (2011, 2020) (excluding TWC Method); SAE J113-4; IEC 61000-4-6; EN 61000-4-6; ECE Regu

ISO 7637-2 (2004, 2011) (Supply Lines only); ISO 7637-3 (2007, 2016) (Capacitive & Inductive Coupling via other than supply lines); ECE Regulation 10.05 Annex 10; ECE Regulation 10.06 Annex 10 Transient Emissions ISO 7637-2 (200

ISO 7637-2; ISO 7637-3; ISO 13766-1; ISO 13766-2 ISO 14982; ISO 16750-2; UNECE Regulation 10, Revision 6, Electronic Sub-assemblies (ESA), Sections 6.7, 6.9, 7.17, 7.19 Wireless (Excluding HAC & SAR)

ISO 7637-2:2011 RTCA/DO-160, Section 22 1 When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current version for a period of one ye

ISO 7637-2 Radio Frequency Immunity Testing ISO 11452-2; ISO 11452-4; SAE J1113-21 Automotive Transients Immunity Testing ISO 7637-2; ISO 7637-3 (CCC only); ISO 16750-2 (Load Dump) Electrostatic Discharge Testing ISO 10605

ISO 7637-2 (including emissions); ISO 7637-3; ISO 7637-4; ISO 16750-2, Sections 4.6.3 and 4.6.4; ISO 21498-1; ISO 21498-2; CS.00054, Section 5.9; CS.00244 Section 5.2.15 through 5.2.21; CS.00245; CS.00246 Section 5.2.4; EMC-CS-2009.1

ISO 7637-2; SAE J1113-11; UN ECE Regulation 10; ISO 14982; ISO 14982-1; ISO 13766-1; EN ISO 13766-1; BS EN ISO 13766-1; AS ISO 13766.1 Conducted Transient Immunity (Other than Supply Lines) ISO 7637-3; SAE J1113-12 Electrical L

ISO 7637-2; ISO 7637-2 (2004, 2011) (Supply Lines only) Electrical Transients other than Supply Lines ISO 7637-3; ISO 7637-3 (2007, 2016) (Capacitive & Inductive Coupling via other than supply lines) The United Nations Economic Com

ISO 7637-2:2011 (12V Systems only) Screening Attenuation Measurements by Reverberation Chamber Method IEC 61726:2015 Screening Attenuation IEEE Std 299:2006 Electricity Meters Code for Electricity Metering (Basic Radiation Sus

ISO 7637-2 (2011); ISO 11452-1 (2001, 2002, 2004, 2005); ISO 11452-2 (2004); ISO 11452-4 (2020); ISO 11452-7 (2003); ISO 11452-8 (2015); ISO 11452-10 (2009); Ford ES-XW7T-1A278-AC; FMC 1278 (2016); GMW 3097; DC-10614 Military / Av

ISO 7637-2 Portable Handheld Transmitter Immunity ISO-11452-9 Radiated Immunity Reverb ISO-11452-11; IEC 61000 4-21 Conducted Transient Emissions ISO-7637-2 Transient Immunity on Supply Lines ISO-7637-2; ISO-7637-4 SAE J1113-

ISO 7637-2; ISO 7637-2 (2004, 2011); Conducted Transient Immunity Supply Lines only ISO 7637-2; ISO 7637-2 (2004, 2011); ISO 7637-2 SAE J1113-11 Transient Immunity Capacitive & Inductive Coupling via other than supply lines

Parameter/Range Frequency CMC2, 4, 6, 7 (±) Comments Absolute Power3 – Measure (+10 to +20) dBm (-30 to +10) dBm (-70 to -20) dBm (-10 to 0) dBm (-60 to -10) dBm 100 kHz to 4.2 GHz (4.

ISO 7637-2; ISO 16750-2 (Sections 4.4, 4.6.3 & 4.6.4) Harley Davidson Component EMC Engineering Guideline EG-812-22614 United Nations UNECE Emissions E/ECE/324 Addendum 9: Regulation 10, Annexes 7 and 8 Immunity E/EC

ISO 7637-2, 2004/104/EC; UN ECE R10.04; EN 60945; IEC 60945; EN 14982; ETSI EN 301 489-1 through ETSI EN 301 489-52; EN 301 908-1 through EN 301 908-22; 3GPP TS 38.114 On the following products or types of products: Industrial

ISO 7637-2; ISO 7637-3 Radio Communications Intentional Radiators 47 CFR Part 15C, E (using ANSI C63.10-2013 and/or FCC KDB 905462 D02 (v02)); 47 CFR Part 15D (using ANSI C63.17:2015); 47 CFR Parts 22, 24, 25, 27, 30, 74, 90, 95,