19 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM A262 testing. From the accredited scope text: “ASTM A262 (Practices A, B, E, and F) Intergranular Attack in Ferritic Stainless Steels ASTM A763 (Practices W, X, and Y) Intergranular Attack in Wrought Nickel Rich, Chromium Bearing Alloys ASTM G28 (” “ASTM A262 (Practices A and E), ASTM G110 Salt Spray (Fog) ASTM B117; ISO 9227; MIL-STD-810 Fastener Testing Axial Tensile Strength ASTM A370, ASTM E8/E8M, ASTM F606/F606M; ISO 898-1, ISO 6892-1; MIL-S” “ASTM A262 (Practice A) Macroetch ASTM E340; ASME Sec. IX (Sec. QW-183, QW-184); AWS D1.1/D1.1M (Sec. 46.10.4, 6.23.2); CSA W47.1 (Sec. 9.10.3, 11.6.4); MIL-STD-248D (1997) (Sec. 4.5.2.6, 5.4.2.3)” “ASTM A262 (Practices A, B, C, E, F), ASTM G28, MAS-CORR, MAS-ASTM G28 Pitting & Crevice Corrosion Susceptibility Test Temperature 20°C - 85°C ASTM A923C, G48, G28, MAS-CORR-923, MAS- ASTM-G48 Environm”
Portland, OR, US
ASTM A262 (Practice A, B, C, E), A923 (Method A & C), G48 (Method B), G110; AMS-H-6088, AMS 2772 Macroetching ASTM E340, E381; ISO 15614-1, 17639 Microetching ASTM E407 Microstructure ASTM A247, F1854; ASM Metals Handbook
South Gate, CA, US
ASTM A262 (Practices A and E) Alpha Case Depth MIL-F-83142 (Paragraph 3.2.3) Depth of Decarburization ASTM E1077 Determination of Delta Ferrite Content AMS 2315 Beta Transus Determination DIN EN 3684
Cleveland, OH, US
ASTM A262 (Practice A & E), G28, G48, G110 Salt Spray ASTM B117; ISO 9227, NASM 1312-1 Humidity ASTM D1735; NASM 1312-3 Other: Failure Analysis (using the test technologies listed above) ASM Metals Handbook Vol. 11 Heat Treat3
Cleveland, OH, US
ASTM A262 (Methods A, C & E), A923 (Methods A & C), G48, G28 (Method A); AMS 5656; DIN 50914; EN ISO 3651, 6957 Decarburization ASTM E1077, F835 F2328; FF-S-85; SAE J121(Withdrawn Jan 2013), J419; GM 6104M; ISO 898-1, 898-5 Delta F
Pittsburgh, PA, US
ASTM A262, Practice A, C, E ASTM E562, E1245 ASTM B487 Ambient Temperature Tensile 600,000 lbs Capacity ASTM A370, A770, B557, E8/E8M, E111; NASM 1312-18 Compression 600,000 lbs Capacity ASTM E9, F36 Wel
Allentown, PA, US
Test Method: Test Description: Charpy Impact (< 590) ft-lbs; (175 to -452) °F ASTM A370, E23; ASME IX; AWS B4.0; ASTM A923 Method B, ASTM A1084 Method B Chemical Analysis (Steel, Stainless Steel, Nickel, & Copper Alloys) (Al, C,
Erie, PA, US
ASTM A262 Methods A & E Macroetch ASTM A561, A604/A604M, E340, E381; AWS D1.1/D1.1M Microhardness ASTM E384, E92 Knoop (100-1000g) Vickers (100-1000g) Microstructure ASTM E1268; ASM Metals Handbook, Volume 9 Microstructure in Cas
Huntington Beach, CA, US
ASTM A262 (Practices A and E), ASTM G110 Salt Spray (Fog) ASTM B117; ISO 9227; MIL-STD-810 Fastener Testing Axial Tensile Strength ASTM A370, ASTM E8/E8M, ASTM F606/F606M; ISO 898-1, ISO 6892-1; MIL-STD-1312-8; NASM 1312-8 Coatin
Euless, TX, US
ASTM A262 (Practices A, B, E, and F) Intergranular Attack in Ferritic Stainless Steels ASTM A763 (Practices W, X, and Y) Intergranular Attack in Wrought Nickel Rich, Chromium Bearing Alloys ASTM G28 (Methods A and B) Exfoliation Corr
Gary, IN, US
ASTM A262 (Practices A, B and E), G28 (Methods A and B) Image Analysis of 2nd Phase Constituents ASTM E1245 Chemical: Sample Preparation by Re-Melting ASTM E1010; Element OP 5071 Inert Gas Fusion (N2, O2) ASTM E1019 Inert Gas Fusion (
Birmingham, AL, US
ASTM A262, Practice A; AMS H6875 Section 4.3.3.2 Case Depth SAE J423 Volume Fraction ASTM E562 Intermetallic Phase ASTM A923-A Inclusion Content (Method A) ASTM E45 Intergranular Corrosion ASTM G28-A, G48-A, A262-E, A262-C, A923-C;
Hatfield, PA, US
ASTM A262 (Practices A, B, C, E, F), ASTM G28, MAS-CORR, MAS-ASTM G28 Pitting & Crevice Corrosion Susceptibility Test Temperature 20°C - 85°C ASTM A923C, G48, G28, MAS-CORR-923, MAS- ASTM-G48 Environmental Simulation Salt Spray
Davenport, IA, US
ASTM A262 (Method A) Chemical Spectroscopy Optical Emission (Al, C, Co, Cr, Cu, Fe, Mn, Mg, Mo, Nb, Ni, P, Pb, S, Si, Ti, V, Zn, W) ASTM E415, E1086, E1251, E1999 Portable X-Ray Fluorescence1 ASTM E572 General Techniques for Obta
Waukesha, WI, US
ASTM A262, Practice A Failure Analysis Using the methods listed above in accordance with ASM Handbook Volume 11
Tipp City, OH, US
ASTM A262 (Practice A) Surface Roughness SAE J911 Density: Wet Density ASTM B311 Fasteners: Stress Durability (Hydrogen Embrittlement) ASTM A574, F835, F912; SAE/USCAR-7; SAE J78, J81, J1237; GM512M2 (obsolete 8/11), GM6010M2
Phoenix, AZ, US
ASTM A262 (Practice A, C, &E); ISO 3651-2, Method A Jominy Hardenability ASTM A255; SAE J406; ISO 642; CAT 1E0024
St. Paul, MN, US
ASTM A262 (Practice A & E)
Sauk Rapids, MN, US
ASTM A262 (Practice A) Macroetch ASTM E340; ASME Sec. IX (Sec. QW-183, QW-184); AWS D1.1/D1.1M (Sec. 46.10.4, 6.23.2); CSA W47.1 (Sec. 9.10.3, 11.6.4); MIL-STD-248D (1997) (Sec. 4.5.2.6, 5.4.2.3)
Dayton, OH, US
ASTM A262 (Method A) MSI PWI #35 Depth of Decarburization ASTM E1077 Grain Size ASTM E112 Microetch / Macroetch ASTM E340, E407 Replication ASTM E1351 SEM Performance ASTM E986 Chemical Analysis Glow Discharge Optical Emissi
This page is a fixed slice of the register: every ASTM A262 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.