37 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM B487 testing. These labs commonly handle Metal matrices. Most frequently tested analytes via this method in United States: Hardness. From the accredited scope text: “ASTM B487 Test Method for Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section ASTM C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gr” “ASTM B487 Optical Microscopy ASTM E883 Weld Evaluation GMW 14058; ISO 15614-1 Weld Testing Bend Test ASME BPVC Section IX (sec. QW-160); AWS D1.1/D1.1M (sec. 6.10.3.1 & 6.10.3.2), AWS D1.2/D1.2M (sec.” “ASTM B487 Coating Weight MIL-A-8625 Porosity AMS 2460 Specimen Preparation1 Heat Treat SOP 63.002 Low Stress Grinding and Polishing2 GE P1TF79” “ASTM B487 Coating-Electroplated Microhardness ASTM B578 Coating Weight ASTM A90/A90M, A428/A428M, B137; MIL- A-8625; MIL-DTL-16232”
Decatur, TX, US
ASTM B487 Coating Weight ASTM B137; MIL-A-8625; MIL-PRF-8625; MIL-DTL-16232 Electrical Resistivity AMS 2477; MIL-C-81706; MIL-DTL-5541; MIL-DTL-81706 Etch Inspection (Nital Etch) AMS 2649 Heat Resistance AMS 2403; AMS 2424 Hydrogen E
Whitehall, MI, US
ASTM B487 Preparation ASTM E3, E1920 Grain Size (Comparison Method Only) ASTM E112, E930 Microetching ASTM E407 Alpha Case MCL III-273 IGA/IGO / Casting Mold Reaction/Alloy Depletion MCL III-251 Delta Ferrite ASTM
Hillsdale, MI, US
ASTM B487; ASTM D7091; Ford BI 117-01; Honda HES D6501 3.2.2; USI 2808, Sections 4.3, 5.3, 5.4.4.1, 5.5.7, 5.5.8; JIS H8501 Coating Weight PPG Thin Film ACT LabWI-0090-20 (Excl. Aluminum Substrates) Wet Strip Weigh Strip Weigh AC
Broken Arrow, OK, US
ASTM B487; ISO 1463; NASM-1312-12 Failure Analysis SOP-G200, ASM Handbook Volume 11 (using test methods contained in this scope) Hydrostatic Pressure Testing SOP G202; ASTM E1003-13 Scanning Electron Microscope/Energy Dispersive Sp
Grand Rapids, MI, US
ASTM B487, E3, E407 Pushout WI-005, -009 Rockwell Hardness (B, C, T) ASTM E18, E140 Tensile, Yield, Elongation, n Value, r Value ASTM A370 (Sections 7-14), E8/E8M, E517, E646 Torque WI-023, -042, -046 Vibration High Temperature (1900°
Cleveland, OH, US
ASTM B487 Material Property Analysis: Coating Weight ASTM A90, A428, B137; NASM 1312-12 Conductivity, Resistivity ASTM B193, E1004 Surface Roughness / Surface Finish ASME B46.1 Adhesion of Metallic Coatings (Bend Test, Burnishing Te
Wyoming, MI, US
ASTM B487, D1005, D4138, D7091; HES D6501 Gloss ASTM D523 Flexibility ASTM D522, D1737 Cure GM9509P (superseded 2012)2; GMW 15891 Odor FLM BO 131; SAE J1351 Circuit Board Inspection Acceptability
Whitmore Lake, MI, US
ASTM B487 Optical Microscopy ASTM E883 Weld Evaluation GMW 14058; ISO 15614-1 Weld Testing Bend Test ASME BPVC Section IX (sec. QW-160); AWS D1.1/D1.1M (sec. 6.10.3.1 & 6.10.3.2), AWS D1.2/D1.2M (sec. 3.8); B4.0 (sec. 6); I
Cleveland, OH, US
ASTM B487, B748 Coating Thickness EN ISO 1463; NASM 1312-12 Coating Weight ASTM A90, A428, B137; MIL-DTL-16232 Conductivity ASTM E1004 Hydrostatic Pressure Tests (0 to 40,000) psi SOP 44.001 Mechanical Tests of Metals and M
Sterling Heights, MI, US
ASTM B487, ASTM D1000 (21-27), D1777, D1813, D3652; FLTM CA 005-001, BP 124-01; ISO 2808 (Method 6A), 9073-2, 5084; HYUNDAI MS700-60 (4.1); RIVIAN RTS.1778; SAE AMS2515 (3.6.1), J882 Thickness of Plastic Sheet – Weight Method FO
El Segundo, CA, US
ASTM B487 Salt Spray ASTM B117, G85
Chicago, IL, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SCIENTIFIC CONTROL LABORATORIES, INC. 3158 South Kolin Avenue Chicago, IL 60623 Aishwarya Krishnamoorthy Phone: 773 254 2406 ext. 21 MECHANICAL Valid To: October 31,
Lakeside, CA, US
ASTM B487/B487M; NASM 1312-12 Tensile Test (UTS, YS, % EI, %ROA) on Machined Specimens at Ambient Temperature ASTM E8/E8M, A370 Grain Size by Comparison ASTM E112 Salt Spray ASTM B117 Magnetic Permeability ASTM A342/A342M Impact
Pittsburgh, PA, US
ASTM B487 Ambient Temperature Tensile 600,000 lbs Capacity ASTM A370, A770, B557, E8/E8M, E111; NASM 1312-18 Compression 600,000 lbs Capacity ASTM E9, F36 Weld/Braze Operator/Procedure Qualification Testing
Hilton Head Island, SC, US
ASTM B487 Mechanical Properties Adhesion and Cohesion Strength of Thermal Spray Coatings (up to 20,000 lbs) ASTM C633 Erosion GEAE E50TF121, GE E50A134 Bend PLC-014 (Internal Method) Hardness Rockwell & Superficial (C and 15N,
Saint Louis, MO, US
ASTM B487 Coating Thickness by SEM ASTM B748 Tension Testing of Metals ASTM A370, E8/E8M Brinell Hardness (500, 3000kg) ASTM E10 Rockwell Hardness (B, C, 30N, 30T) ASTM E18, F606/F606M Average Grain Size (Comparison) AST
Largo, FL, US
ASTM B487, B748 Passivation of Stainless Steel, Copper Sulfate Test ASTM A380 (Paragraph 7.2.5.3) Metallographic Evaluation Grain Size (Comparison) ASTM E112 Microstructure Evaluation ASM HBK Vol. 9 Failure Analysis MM00091; ASM Han
Duarte, CA, US
ASTM B487 Test Method for Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section ASTM C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Bur
Bohemia, NY, US
ASTM B487 Inclusion Content ASTM E45 Electrical Conductivity of Aluminum Alloys AMS 2658 Optical Emission Spectroscopy – Low Alloy Steel, High Alloy Steel, Aluminum Alloys, Titanium Alloys, Copper Alloys, Nickel Alloys
Huntington Beach, CA, US
ASTM B487 Coating Weight MIL-A-8625 Porosity AMS 2460 Specimen Preparation1 Heat Treat SOP 63.002 Low Stress Grinding and Polishing2 GE P1TF79
Euless, TX, US
ASTM B487 Coating-Electroplated Microhardness ASTM B578 Coating Weight ASTM A90/A90M, A428/A428M, B137; MIL- A-8625; MIL-DTL-16232
Gary, IN, US
ASTM B487 Corrosion ASTM A262 (Practices A, B and E), G28 (Methods A and B) Image Analysis of 2nd Phase Constituents ASTM E1245 Chemical: Sample Preparation by Re-Melting ASTM E1010; Element OP 5071 Inert Gas Fusion (N2, O2) ASTM E101
Kentwood, MI, US
ASTM B487; ISO 1463; DIN EN ISO 1456; FLTM BI 117-1 (magnetic substrate only); DIN 50600; DIN EN ISO 1463; ASTM B504; ISO 2808, Method 7D; ISO 2360; ISO 2177 Decarburization GM 6104M 4; SAE J419 Discontinuous Chromium/Pore Cou
Richardson, TX, US
ASTM B487, B748 SEM ASTM B748, E766 Mechanical Tests Hardness/Microhardness Brinell – 3000kg ASTM E10 Durometer Hardness (Shore A, D, and M) ASTM D2240 Microhardness Knoop – 500g, Vickers 500g ASTM E384 Rockwell (HRBW, H
Winona, MN, US
ASTM B487, B568 Salt Spray ASTM B117; ISO 9227 Passivation of Stainless Steel ASTM A380/A380M 8/13/25 Nondestructive Analysis Magnetic Permeability ASTM A342/A342M (Method 3) XRF PMI Analysis Niton Alloy Anal
Davenport, IA, US
ASTM B487 Macroetch ASTM E381 Microstructure Analysis ASTM E883 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy (EDS, SEM) ASTM E1508 (Standardless Technique)
Waukesha, WI, US
ASTM B487 Volume Fraction ASTM E562 Intergranular Corrosion ASTM A262, Practice A Failure Analysis Using the methods listed above in accordance with ASM Handbook Volume 11
Carol Stream, IL, US
ASTM B487; ISO 1463 I. Dimensional Testing: Parameter/Equipment Range CMC1 (±) Comments Linear2 -1D -2D Up to 1.0000 in Up to 25 mm Up to 6.0000 in Up to 152.000 mm Up to 6.0000 in Up to 152.0
Tipp City, OH, US
ASTM B487, JDQ 117, JDM F15; Honda HES D2003 (3.3), D2008, D2021, D2016, D2028, D6001 (4.2), D6501 (3.2); Honda 5100Z-TR0-6001, 5100Z-3MAA-8000, 5100Z-3MAA-6000, 9000Z-T2A-A000 Acid Resistance ASTM D1308; Honda HES D6001, D2016, D202
Phoenix, AZ, US
ASTM B487 Micro-Cleanliness Rating ASTM E45 (Method A, C, D, E); ISO 4967 (Method A and B); DIN 50602 (Method M & K); JIS G 0555 Microetching Metals and Alloys ASTM E407 Proof (Internal & External Threads) ASTM F606/606M;
Rancho Cucamonga, CA, US
ASTM B487; NASM1312-12 Case Depth (Effective and Total) ASMT B934; SAE J423 Macro Examination ASTM E340; E381
St. Paul, MN, US
ASTM B487 (Using Computer Imaging) Microetching AMS 2643; ASTM E3, E407 Metals and Metal Products, Fasteners: Axial Tensile Strength of Full-Sized Threaded Fasteners AC 118, ASTM F606/F606M; BAC D2-2860; ISO 898-1, ISO 6892-1
Sauk Rapids, MN, US
ASTM B487, B748, C664 Depth of Decarburization ASTM E1077, F2328, F2328M; SAE J121 (2013), J121M (2013), J419 Grain Size (Comparison, Intercept) ASTM E112, E930, E1181 Intergranular Attack ASTM A262 (Practice A) Macroetch
Dayton, OH, US
ASTM B487 Inclusion Content ASTM E45 (Method A) Susceptibility to IGA of Austenitic Stainless Steel Intergranular Attack/Oxidation ASTM A262 (Method A) MSI PWI #35 Depth of Decarburization ASTM E1077 Grain Size ASTM E112 Microet
Virgil, IL, US
ASTM B487, B748 Metallographic Evaluation Preparation ASTM E3, E340, E407 Grain Size ASTM E112 (Comparison Method) Carburization/Decarburization Depth ASTM E1077, F2328 Case Depth SAE J423 Inclusion Conten t ASTM E45 (Method A) Corr
Sturbridge, MA, US
ASTM B487 Non-Conventional Machining Analysis PWAE167, P29TF73, P1TF10 Micro etching ASTM E407 Macro etching ASTM E340; P4TF8 Alloy Depletion SOP 1017 Alpha Case SOP 1024 Carburization ASTM E1077; SAE J423; Deca
Burlington, WI, US
ASTM B487; GMW 14797 Fogging GMW 3235; LP-463DB-12-01; SAE J1756, 0094Z-000 Formaldehyde Emissions VDA275; PV3975 Gakushin Abrasion TSL5100G Gardner Impact ASTM D5420 Gravelometer/Chip Resistance SAE J400; GMW 14700
This page is a fixed slice of the register: every ASTM B487 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.