ASTM D751 Accredited Testing Labs in United States
12 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D751 testing. These labs commonly handle Aggregates, Drinking water, Textile matrices. Most frequently tested analytes via this method in United States: Moisture Content, Odor, Resistance To Degradation. Accredited providers include Kinectrics AES, DEKRA Testing and Certification (Shanghai), Michigan Testing Institute, Intertek Testing Services NA, Applied. Sites located in Louisville, KY, Shanghai, Sterling Heights, MI, Duluth, GA, Byron Center, MI.
Accredited Labs
(A2LA Cert. No. 3570.01) Revised 06/23/2025 Page 2 of 22 Thermal: Test Test Method(s) Specifications(s) Flame Resistance of Textiles (Vertical Test) (cont.) ASTM D6413/D6413M NFPA 1970 Section 9.2.1, Section 14.6; NFPA
(A2LA Cert. No. 4267.02) 06/25/2025 Page 7 of 9 Test Technology: Test Method(s): Specific Gravity ISO 1183; GB/T 1033 Tensile Stress at Break ISO 37; GB/T 528 Elongation at Break ISO 37; GB/T 528 Tensi
(A2LA Cert. No. 0414.01) Revised 11/03/2025 Page 2 of 15 Test Standard Adhesion and Peel Strength (continued) GMW 14892, 14829, 16005, 16443, 14695, 14757, 15851 (4.1.3.6.2); HINO HTSH1503; HONDA HES D6501 (3.6); HYUNDAI
(A2LA Cert. No. 1249.02) Revised 03/02/2026 Page 9 of 11 Test Technology/Test Parameters1: Test Method(s): Standard Test Method for Burst Strength ASTM D751 Standard Specification for Isolation Gowns Intend
(A2LA Cert. No. 3193.01) 08/18/2025 Page 2 of 2 Test Description Test Method(s) Tear Strength of Fabrics: Tongue Method ASTM D751 Section 33-36, D2261, D5735-95 (2001); CFFA 16b Tear Strength of Fabrics: Trapezoid Method ASTM D751 S
(A2LA Cert. No. 6550.01) Revised 03/03/2026 Page 2 of 2 Reference Standard(s) ASTM D380, ASTM D2803, ASTM D751 BMW DIN 73411-2 CS.00056 ESDG93-8260-AA, ESBB53-6C646-AA, ESBR33-9R504-AA FMVSS 106 GMW16153, GMW14785, GMW16295, GM
(A2LA Cert. No. 7144.01) 04/01/2025 Page 2 of 2 Test(s): Test Method(s): Seam Slippage ASTM D434-95 (withdrawn), D1683, D3597 Section 6.3, D4034 Smoldering Ignition Flammability ASTM E1353 Cover Fabric Test; California TB
(A2LA Cert. No 0079.01) 12/31/2025 Page 6 of 11 Test: Test Method: Odor (cont’d) Toyota BSDM 0505 (excluding water extraction), TSM 0505G (excluding water extraction); VDA 270; Volvo 429-0001; Oven / Exposure Cycle ASTM D573
(A2LA Cert. No. 2180.01) Revised 06/05/2025 Page 1 of 6 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 VARTEST LABORATORIES, INC.1 19 West 36th St 10th Floor New York, NY 10018 Adam R. Varley Phone: 212 947 8391
(A2LA Cert. No. 0823.01) 02/11/2025 Page 2 of 5 Test Method: Test Description: Aggregates (continued): ASTM C535 Resistance to Degradation of Lar
(A2LA Cert. No. 0078.02) Revised 01/07/2026 Page 9 of 17 Test *: Test Method(s) 1,2: Thickness ASTM D1777; ASTM D1000; ASTM D1813; ASTM D5736; ASTM C167; SAE J1355; SAE J882; ISO 2589; TSL 2100G; TSL 3505G; FLTM BN114-01 Tra
(A2LA Cert. No. 2692.01) 06/12/2025 Page 4 of 5 Test Description Test Method(s) Moisture Uptake MS 300-32 (4.3); WSS M2D491-A1 (3.5.14) Odor ESX-62101 (4.9); FLTM BO 131-03; GMW3205; SAE J1351 Pile Distortion
Top matrices for ASTM D751 in United States
Top analytes for ASTM D751 in United States
- Moisture Content (1)
- Odor (1)
- Resistance To Degradation (1)
- Specific Gravity (1)
About ISO/IEC 17025 in United States
American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.