9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform EN ISO 2813 testing. These labs commonly handle Plastics matrices. From the accredited scope text: “EN ISO 2813; MBN 10494-4 (Section 5.1) Chip Resistance ASTM D3170; Chrysler LP-463PB-39-01; GM 9508P; GMW14700; SAE J400; FLTM BI 107-01; ISO 20567-1; DBL 7399 (Section 5.3); MBN 10494-5 (Section 5.2)”
Phoenix, AZ, US
Using the following test methods and specifications: ISO (International Standards Organization, continued) ISO 2810 Paint and Varnishes - Notes for Guidance on the Conduct of Natural Weathering Tests ISO 2813 Measurement of Specul
Sterling Heights, MI, US
Test Standard Fogging FORD FLTM BO116-03, GM 9305P; GMW 3235; HYUNDAI MS210-05 (4.11); RIVIAN RTS.1755; SAE J1756; TOYOTA TSM0503G Method B, BSDM0503 Method B Fuel Resistance DSM ESX-62310 (4.12), ESX
Harper Woods, MI, US
Test: Test Method: Fogging ASTM D5393-93; Chrysler LP-463DB-12-01, LP.7M133; DIN 75201; Ford FLTM BO 116-03 (1990); Fuji/Subaru TS 420-00-032; GMW3235; Honda HES D6508; Hyundai/Kia MS-300-54; ISO 6452; Mazda MES MN401;
Sylvania, OH, US
Test Test Method(s) GMW14668 3.4.9; HES D6001 (Section 4.4.1), HES D6501 (Section 3.29); Navistar MPAPS GT-Paint GT-14C; NES M0007 Section 46; TSH 1551G Heat / Quench Delphi DX551200, Delphi DX551300; GMW3044, GMW4700; Inteva
Kentwood, MI, US
EN ISO 2813; MBN 10494-4 (Section 5.1) Chip Resistance ASTM D3170; Chrysler LP-463PB-39-01; GM 9508P; GMW14700; SAE J400; FLTM BI 107-01; ISO 20567-1; DBL 7399 (Section 5.3); MBN 10494-5 (Section 5.2); EG-812-22611-115 Hardness
Ridgway, PA, US
Test: Test Method(s): Gloss (continued) ISO 2813; John Deere JDQ 12; Nissan NES M0007 (Method 21); PACCAR CMT0033 (9.16, 9.17); Toyota TSH1519G (3) Hardness AAMA 612 (8.5); AAMA 2603 (8.3); AAMA 2604 (8.3); AAMA 2605 (8.3); AST
Wittmann, AZ, US
1 Using the following test methods in addition to customer-supplied methods directly related to the types of tests and parameters above: OUTDOOR WEATHERING: Q-RACK TESTING ASTM G7 Atmospheric Environmental Exposure Testing of Nonmetall
Miami, FL, US
DIN (Deutsches Institut für Normung) DIN EN ISO 11664-4 Colorimetry – Part 4: CIE 1976 L*a*b* Colour Space DIN 53209 Designation of Degree of Blistering of Paint Coatings DIN 67530 Refractometers as a Means for Gloss Assessment of Plan
Burlington, WI, US
Test Description/ Equipment Parameter Test Method(s): Solar Simulation PR306; DIN 75220 Dust Ingress SAE J575 §3.3; DIN 40050 Part 9 (IP5K and IP6K); MIL-STD 810H Linear/Inverted Pendulum Impact Testing Impact Velocity Up to 30 m
This page is a fixed slice of the register: every EN ISO 2813 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.