FindTestingLabs

EPA 200.7 Accredited Testing Labs in United States

9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform EPA 200.7 testing. These labs commonly handle Drinking water, Non-potable water, Nonpotable Water matrices. Most frequently tested analytes via this method in United States: Strontium, Cadmium, Copper. Accredited providers include Element Materials Technology - Fort Wayne, Eurofins Denver, Microbac Laboratories, Inc. Ohio Valley Division, Pace Analytical National, Eurofins Lancaster Laboratories Environment Testing. Sites located in Fort Wayne, IN, Arvada, CO, Marietta, OH, Mt. Juliet, TN, Lancaster, PA.

Labs
9
Top matrix
Drinking water
5 labs
Top analyte
Strontium
2 labs
Primary AB
A2LA
9 labs

Accredited Labs

Element Materials Technology - Fort Wayne
Fort Wayne, IN, US

(A2LA Cert. No. 6190.02) 10/21/2025 Page 2 of 10 Parameter/Analyte Non-Potable Water Potable Water Solid Hazardous Waste Aqueous Solid/Chemical Coppe

Eurofins Denver
Arvada, CO, US

(A2LA Cert. No. 2907.01) Revised 01/16/2026 Page 2 of 17 Parameter/Analyte Non-Potable Water Solid Hazardous Waste Water Solid Chromium EPA 200.7 EPA 200.8 EPA 6010C/6010D EPA 6020B EPA 6010C/6010D EPA 6020B

Microbac Laboratories, Inc. Ohio Valley Division
Marietta, OH, US

(A2LA Cert No. 2936.01) Revised 09/23/2025 Page 2 of 23 Parameter/Analyte Non-potable Water (1) Solid and Chemical Materials (2) Cadmium EPA 200.7/200.8 EPA 6010B/6010C/6010D EPA 6020/6020A/6020B EPA 6010B/6010C/6010D EPA 6020/6020A/

Pace Analytical National
Mt. Juliet, TN, US

(A2LA Cert. No. 1461.01) Revised 02/20/2026 Page 3 of 25 Parameter/Analyte Potable Water Nonpotable Water Solid Hazardous Waste Aqueous Solid Strontium EPA 200.7 EPA 200.7 EPA 200.8 EPA 6010B/C/D EPA 6020/6020A/6020B EPA 6010B

Eurofins Lancaster Laboratories Environment Testing
Lancaster, PA, US

1 – In addition to GC/MS, the lab offers this method by GC/MS-MS for this analyte. 2 – In addition to GC/MS, the lab offers this method by SIM for this analyte 3 – In addition to GC/MS, the lab offers this method by SIM – isotope dilution

Element Materials Technology - Lafayette
Lafayette, LA, US

(A2LA Cert. No. 6190.01) 07/18/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT MATERIALS TECHNOLOG

ProQuality
Cartersville, GA, US

(A2LA Cert. No. 3510.01) 01/28/2026 Page 2 of 2 Parameter/Analyte Nonpotable Water Turbidity EPA 180.1 Metals Alu

Midwest Analytical Services
Ferndale, MI, US

(A2LA Cert No. 0381.01) REVISED 01/16/2026 Page 1 of 6 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MIDWEST ANALYTICAL SERVICES, INC. 2905 Hilton Road Ferndale, MI 48220 Kevin O’Mara Phone: 586-873-116

Transitrex Research and Development Corporation SLB Reservoir
Dubai, US

(A2LA Cert No. 4091.05) Revised 11/18/2025 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TRANSITREX RESEARCH AND DEVELOPMENT CORPORATION SLB RESERVOIR LABORATORIES Plot No. WWA115 Jebel Ali Free Zone 17081 – Dub

Top matrices for EPA 200.7 in United States

Top analytes for EPA 200.7 in United States

  • Strontium (2)
  • Cadmium (2)
  • Copper (2)
  • Chromium (1)
  • Gas Oil Ratio (1)

About ISO/IEC 17025 in United States

American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.

ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.

Related searches

All accredited testing labs in United States