7 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ISO 7500 testing. From the accredited scope text: “ISO 7500-1 ASTM E4 & ISO 7500-1 North America, Japan Norden Creep Testing Machines3 – Force Measuring (Onsite Only) 100 N to 30 kN 0.25 % ISO 7500-2 Japan Torque – Measuring Equipment (5 to 2000) lbf·” “ISO 7500-1, Class 6 dead weights Class 1gram weights Dynamic Force 3 (0.5 to 700 000) lbf 0.75 % of Force Indication ASTM E-467 & NASM 1312, dynamometers & load cells Verification of Test Frames 3 – C” “ISO 7500-1 Dead weights Load cells” “ISO 7500-1 using load cells, dead weights Extensometers 3 (0.1 to 100) mm 0.10 % ASTM E83, ISO 9513 using digital high accuracy length scale Scales & Balances 3 (0.01 to 1000) lbf 4.5 g to 454 kg 0.01”
Naperville, IL, US
ISO 7500-1 within the Class 0.5 or 1 working range Force3 – Measuring Equipment (Tension & Compression) Calibration by Deadweight with Local Gravity & Air Buoyancy Corrections Comparison to Load Cell in Compression / Tens
Chattanooga, TN, US
Parameter/Equipment Range CMC2, 4, 5 () Comments Force Transducers 3 – Tension & Compression (cont) (40.0 to 2000) lbf (2000 to 10 000) lbf 0.13 % 0.12 % ASTM E4, ISO7500 Load cell
Union, NJ, US
ISO 7500-1 Dead weights Load cells
Riverview, MI, US
ISO 7500-1 using load cells, dead weights Extensometers 3 (0.1 to 100) mm 0.10 % ASTM E83, ISO 9513 using digital high accuracy length scale Scales & Balances 3 (0.01 to 1000) lbf 4.5 g to 454 kg 0.01 %
Eden Prairie, MN, US
ISO 7500-1 ASTM E4 & ISO 7500-1 North America, Japan Norden Creep Testing Machines3 – Force Measuring (Onsite Only) 100 N to 30 kN 0.25 % ISO 7500-2 Japan Torque – Measuring Equipment (
Suite E Addison, IL, US
Parameter/Equipment Range CMC2, 4, 7 () Comments Force – Tension & Compression (0.01 to 50) lbf (50 to 500) lbf 1 g to 10 kg 0.0061 lbf 0.06 lbf 0.12 % ASTM E-4 & ISO 7500-1, Class 6 dead weights
Belpre, OH, US
II. Dimensional Testing/Calibration1 Parameter/Equipment Range CMC2 (±) Comments Measure Length (1D)3, 4, 5 – (Fixture Gages) Inside Diameter Radius Angle Up to 1 in Up to 8 in Up to 0.5 in
This page is a fixed slice of the register: every ISO 7500 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.