Gage block Testing Labs in United States
15 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform Gage block testing. Most frequently tested analytes in this matrix in United States: Length, Ph. Accredited providers include Technical Maintenance, Inc. - PEACHTREE CORNERS, Technical Maintenance, Inc. - COLORADO SPRINGS, Technical Maintenance, Inc. - TEMPLE TERRACE, Technical Maintenance, Inc. - WINDSOR, NOVASTAR SOLUTIONS.COM LLC DBA NOVASTAR METROLOGY. Sites located in Peachtree Corners, GA, Colorado Springs, CO, Temple Terrace, FL, Suite B Windsor, CT, Livonia, MI.
Accredited Labs
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Page 163 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Indicators Test3 – Up to 0.05 in Up to 1.25 mm 15 µin 0.38 µm Calibration tester, gage blocks Cylindri
Page 163 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Indicators Test3 – Up to 0.05 in Up to 1.25 mm 15 µin 0.38 µm Calibration tester, gage blocks Cylindri
(A2LA Cert. No. 1277.01) Revised 07/16/2025 Page 2 of 24 II. Chemical Parameter/Equipment Range CMC2, 6, 10 (±) Comments pH3 – Measuring Equipment 4.01 pH unit 7.01 pH unit 10.01 pH unit 0.019 pH unit
(A2LA Cert. No. 4218.01) Revised 12/24/2025 Page 14 of 26 Parameter/Equipment Range CMC2, 4 (±) Comments Location9 Dial Indicators Up to 25 mm (≥ 25 to 50) mm 6 μm 10 μm VDI/VDE/DGQ 2618 Steel &
Page 163 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Indicators Test3 – Up to 0.05 in Up to 1.25 mm 15 µin 0.38 µm Calibration tester, gage blocks Cylindri
Page 163 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Indicators Test3 – Up to 0.05 in Up to 1.25 mm 15 µin 0.38 µm Calibration tester, gage blocks Cylindri
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Page 163 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Indicators Test3 – Up to 0.05 in Up to 1.25 mm 15 µin 0.38 µm Calibration tester, gage blocks Cylindri
Page 163 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Indicators Test3 – Up to 0.05 in Up to 1.25 mm 15 µin 0.38 µm Calibration tester, gage blocks Cylindri
Page 162 of 205 (A2LA Cert. No. 2348.01) Revised 03/04/2026 Parameter/Equipment Range CMC2, 8 (±) Comments Gage Block – Parallelism Up to 4 in Up to 100 mm (5 to 20) in (125 to 500) mm 2.7 µin 0.069 µm 1.6 µin 0.04
Top analytes for Gage block in United States
- Length (1)
- Ph (1)
About ISO/IEC 17025 in United States
American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.