Oil Testing Labs in United States
37 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform Oil testing. Common methods used to test Oil in United States: iec-60068-2-1, iec-62368-1, iso-10605. Most frequently tested analytes in this matrix in United States: Ac Current, Dc Voltage, Dc Current. Accredited providers include Advanced Technology Services - Caterpillar Technical Center, Compliance Certification Services, Inc. Automotive Electronics, Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch, Aldinger Company dba Precision Calibration Systems, Cal-Tek Company. Sites located in Phoenix, AZ, Tech Center TCL Chillicothe, IL, Wugu District, New Taipei City 24891, Dongguan City, Guangdong Province, Morristown, TN.
Accredited Labs
(A2LA Cert. No. 1592.05) Revised 11/03/2025 Page 7 of 21 Parameter/Range Frequency CMC2, 5 () Comments AC Current – Generate (cont) (2.2 to 22) mA (2
(A2LA Cert. No. 0824.01) Revised 08/08/2024 Page 2 of 2 Test Technology: Test Method(s): Bulk current Injection RF Immunity ISO 11452-4 (excluding TWC method) Stripline RF Immunity (1MHz to 400 MHz) ISO 11452-5 Immunity to Magne
(A2LA Cert. No. 2951.01) Revised 11/25/2025 Page 8 of 16 Test Technology: Test Method(s) 2: Product Safety (excluding Ionizing Radiation, CRT Tests, Laser Radiation, Hot Flaming Oil, Test after UV Exposure on Material,
(A2LA Cert. No. 1509.03) 05/20/2025 Page 4 of 34 Parameter/Equipment Range CMC2, 8 (±) Comments DC Current – Generate3 Up to 329.999 μA 329.999 μA to 3.299 99 mA (3.299 999 9 to 32.999 99) mA (32.999 99 to 329.
(A2LA Cert. No. 7440.01) Revised 08/19/2025 Page 3 of 16 Parameter/Equipment Range CMC2, 5 (±) Comments DC Current – Generate 3 Up to 220 μA 220 μA to 2.2 mA (2.2 to 22) mA (22 to 220) mA 220
(A2LA Cert. No. 1658.01) 08/07/2025 Page 7 of 7 Parameter/Equipment Range CMC2 (±) Comments Test and Calibration of RTDs3 – Pt 385, 100 Ω Pt 385, 1000 Ω Pt 385, 100 Ω Pt 385, 1000 Ω
(A2LA Cert. No. 1599.01) Revised 03/09/2026 Page 3 of 4 Parameter/Equipment Range CMC2, 4 () Comments Pressure – Oil Effective Area of Piston Cylinder Calibration of Secondary Standards & Pressure Devices
(A2LA Cert. No. 3410.01) 07/21/2025 Page 8 of 38 Parameter/Range Frequency CMC2, 5 () Comments AC Current – Generate Up to 220 μA (0.22 to 2.2) mA (2.2 t
(A2LA Cert. No. 3971.01) Revised 08/19/2025 Page 14 of 27 Test Technology: Test Method(s) 3: Household and similar electrical appliances – Safety – Part 2-90: Commercial microwave ovens IEC/EN 60335-2-90; GB 4706.90; AS/NZS 60
(A2LA Cert. No. 1894.01) Revised 07/07/2025 Page 24 of 28 IV. Mechanical Parameter/Equipment Range CMC2, 7 (±) Comments Torque – Wrenches, Screwdrivers, Wa
(A2LA Cert. No. 4232.01) 01/03/2024 Page 1 of 1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AEROBLAZE LABORATORY INC. 2825 S Burleson Blvd Burleson, TX 76028 Andrew Feghali Phone: 817 668 0628 MECHANICAL Val
(A2LA Cert. No. 1888.09) 10/31/2025 Page 11 of 17 Parameter/Range Frequency CMC2, 5, 6 (±) Comments AC Current – Generate3 330 mA to 1.1 A (1.1 to 3) A (3 to 11) A (11 to 20.5) A
(A2LA Cert. No. 1362.01) Revised 03/12/2026 Page 2 of 5 Test Method: Test: Air Filtration – HVAC / General Ventilation ISO 11155-1 Road vehicles — Air filters for passenger compartments — Part 1: Test for particulate filtrat
(A2LA Cert. No. 1888.11) Revised 11/19/2025 Page 18 of 33 Parameter/Range Frequency CMC2, 6 (±) Comments AC Current – Generate 3 (cont) (11 to 20.5) A (45 to 100) Hz 100 H
(A2LA Cert. No. 1848.01) Revised 09/11/2025 Page 6 of 21 Parameter/Equipment Range4 CMC2 (±) Comments Optical Comparators & Measuring Machines3 – Axis Linearity Magnification Angularity Up to 12 in 5
(A2LA Cert. No. 1509.01) Revised 07/09/2025 Page 6 of 37 Parameter/Equipment Range CMC2, 6, 12 (±) Comments Capacitance – Generate3 Low High (0.22 to 3.3) nF (3.3 to 33) nF (33 to 330) nF (3
(A2LA Cert. No. 1888.05) Revised 02/03/2025 Page 4 of 18 Parameter/Equipment Range CMC 2, 5, 6 () Comments DC Voltage – Measure3 (0 to 100) mV 100 mV to 1 V (1 to 10) V (10 to 100) V (100 to 1000) V (1 to 9) kV (9 to 90)
(A2LA Cert. No. 3467.01) 08/04/2025 Page 5 of 22 Parameter/Equipment Range CMC2, 6 (±) Comments DC Current – Generate3 (0 to 329.999) µA (0.33 to 3.299 99) mA (3.3 to 32.9999) mA (33 to 329.999) mA (0.33 to
(A2LA Cert. No. 1337.04) 03/12/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 CLARK TESTING SERVICES LLC 821 E. Front Street Buchanan, MI 49107 Elizabeth Gonzalez-Arias 412-387-1661 MECHANICA
For the tests to which this accreditation applies, please refer to the laboratory’s Chemical Scope of Accreditation. Accredited Laboratory A2LA has accredited ALS OIL & LUBRICANTS (TRIBOLOGY) Burlington, Ontari
(A2LA Cert. No. 2171.01) 02/10/2025 Page 5 of 36 Parameter/Equipment Range CMC2, 4 () Comments DC Current 3 – Generate Clamp-On Meters Ohm’s Law Method (0 to 220) A (0.22 t
(A2LA Cert. No. 3815.01) 11/26/2025 Page 3 of 5 Parameter/Equipment Range CMC2, 3, 5 (±) Comments DC Resistance – Measure 0.1 Ω to 100 MΩ 0.055 % Keysight 34461A DC Current – Generate Clamp meters
(A2LA Cert. No. 2012.01) Revised 06/16/2025 Page 9 of 13 Test: Test Method(s): Oil Resistance ASTM D1308; Daimler 49-00023 (10.7); GMW14671 (4.11.1); Honda 4251Z-SEP-A000 (5.6); Honda 5100Z-SE0-0000 (6-15); Honda 5
(A2LA Cert. No. 2133.02) Revised 01/10/2025 Page 3 of 21 Parameter/Equipment Range CMC2, 6 (±) Comments DC Current3 – Measure Up to 100 nA 100 nA to 1 μA (1 to 10) μA (10 to 100
(A2LA Cert. No. 2736.01) 09/25/2024 Page 15 of 18 Parameter/Equipment Range CMC2 (±) Comments Mass – Fixed Points (cont) 500 mg 300 mg 200 mg 100 mg 50 mg 30 mg 20 mg 10 mg 5 mg 3 mg 2
(A2LA Cert. No. 1297.01) Revised 12/17/2024 Page 7 of 18 Parameter/Equipment Range CMC2, 5, 6 (±) Comments DC Current – Measure & Generate Generate High Current – Generate 0.1 μA to 2 A (2 to 20) A (20 t
(A2LA Cert. No. 2635.01) 07/08/2025 Page 2 of 21 Parameter/Equipment Range CMC2, 4, 7 (±) Comments DC Voltage – Measure (0 to 200) mV (0.2 to 2) V (2 to 20) V (20 to 200) V (200 to 1000) V (10 to 100) mV (0
(A2LA Cert. No. 2133.01) 08/26/2024 Page 7 of 25 Parameter/Range Frequency CMC2, 6 (±) Comments AC Current3 – Generate Up to 220 μA (0.22 to 2.2) mA (2.2 to 22) mA
(A2LA Cert No. 7198.01) Revised 04/11/2025 Page 1 of 5 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Baker Wine & Grape Analysis, Inc.
(A2LA Cert. No. 2017.01) 06/09/2025 Page 6 of 7 IV. Thermodynamics Parameter/Equipment Range CMC2, 7 () Comments Temperature – Temperature Measure 3 Temperature Meters (-55 to 0) °C (0 to 2
(A2LA Cert. No. 1888.07) 02/20/2025 Page 11 of 17 Parameter/Range Frequency CMC 2, 5, 6 (±) Comments AC Current – Generate3 (cont) (33 to 330) mA 330 mA to 1.1 A (1.1 to 3) A (3 to 11)
(A2LA Cert. No. 5678.01) Revised 11/07/2025 Page 1 of 3 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 APEX TEST LABS 815 N. Opdyke Road, Suite 100 Auburn Hills, MI 48326 Jason Kanakry Email: jason.kanakry@apex-te
(A2LA Cert. No. 2810.01) 6/18/2025 Page 2 of 7 II. Electrical – DC/Low Frequency Parameter/Equipment Range CMC2, 4 (±) Comments DC Voltage3 – Generate (0 to 330) mV 33
(A2LA Cert. No. 1567.03) Revised 06/12/2025 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 A PTIV WESTFIELD TEST LAB EMC Laboratory 17001 Oak Ridge Road Westfield, IN 46074 Chad Blueher (Chad.Blueher@Aptiv.com) Phone: (765)
(A2LA Cert. No: 2976.01) 03/21/2024 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AUSTIN RELIABILITY LABS 12317 Technology Blvd, Suite 100 Austin, TX 78727 Larry Legler Phone: 512-623-4717 MECHANICAL V
(A2LA Cert. No. 4139.01) 12/30/2024 Page 1 of 6 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 AMSPEC LLC 3800 Highway 225 Pasadena, TX 77503 Mandy Tan Phone: 281 620 0333 Email: mandy.tan@amspecgroup.com C
(A2LA Cert. No. 1395.05) Revised 04/16/2025 Page 24 of 27 Parameter/Equipment Range4 CMC2, 5, 8, 10 (±) Comments Pressure Measure & Measuring Equipment3– Nitrogen Gas Oil (0.01 to 10) Torr >
Top methods used to test Oil in United States
Top analytes for Oil in United States
- Ac Current (11)
- Dc Voltage (6)
- Dc Current (5)
- Ash (1)
- Carbon Residue (1)
About ISO/IEC 17025 in United States
American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.