ASTM D1003 Accredited Testing Labs Worldwide
14 accredited laboratories in 4 countries hold ASTM D1003 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D1003 scope entries most often cover Fogging, Dry Film Thickness, Farbmaßzahlen in Plastics, Textile.
Available in 4 Countries
Top matrices for ASTM D1003
Top analytes for ASTM D1003
- Fogging (2)
- Dry Film Thickness (1)
- Farbmaßzahlen (1)
- Benzil Butilftalato (1)
- Hardness (1)
- Haze (1)
- Flammability (1)
Sample labs
ASTM D1003-21 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities ASTM F1450-12a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric ASTM D3776/D3776M-20 Standard Test Me
ASTM D1003 2013 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ASTM E313 2020 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM D1003; HES D6508 [REV.B]; NES M0161 [2011-N]; TSM0501G [REV. 16], Sect. 9.15
ASTM D1003 (Except Procedure B) Standard Test Method for Rate of Burn and/or Extent and Time of Burning of Plastics in a Horizontal Position ASTM D635-981 1The laboratory is only accredited for the test methods and standards
ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ASTM E1331 Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry BS 2782-5 Determination of Haze of Film and Sheet (Me
Test Standard Fogging FORD FLTM BO116-03, GM 9305P; GMW 3235; HYUNDAI MS210-05 (4.11); RIVIAN RTS.1755; SAE J1756; TOYOTA TSM0503G Method B, BSDM0503 Method B Fuel Resistance DSM ESX-62310 (4.12), ESX
ASTM D1003, Method B Haze and Transmittance of Transparent Plastics ASTM D2244 Calculation of Color Differences from Instrumentally Measured Color Coordinates WEATHERING AND CORROSION EVALUATIONS: SPECULAR GLOSS ISO 2813 Determinat
1.3 Materialprüfungen mit optischen Prüfverfahren ***) ISO 7724 -2 1984-10 Lacke und Anstrichstoffe; Farbmessung; Teil 2: Bestimmung von Farbmaßzahlen ISO 7724 -3 1984-10 Lacke und Anstrichstoffe; Farbmessung; Teil 3: Berechnun
ASTM D1003-21 _ Lenti finite senza montatura/Uncut finished spectacle lenses Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Infiammabilità/Flammability Resistenza alla radiazione ultravioletta/Resist
ASTM D1003, ASTM D1455; Ford FLTM BI 110-01, FLTM BI 010-02; Honda HES D6501; ISO 2813 Hardness ASTM D785 (R Scale), ASTM D2240 (Shore A, D), ASTM D3363; Ford FLTM BI 151-01; Honda HES D6501; ISO 48-4, ISO 868, ISO 2039-2, ISO 7
ASTM D1003 Hardness Rockwell Hardness Testing Scales: (HRB, HRC, HR15N) ASTM E18 Helmets Motorcycle Helmets DOT FMVSS 218; 49 CFR 571.218 Section 7.1 Mass per Unit Area (Weight) of Woven Fabric ASTM D3776, Option C Thickness o
ASTM D1003; ASTM F801; ASTM F2156 Temperature Shock ATPD 2352, 3.3.4, 4.3.4; ANSI/SAE Z26.1, 5.2, 5.15; MIL-STD-810F (Method 503.4) Sun Exposure/Weathering ATPD 2352, 3.3.5, 4.3.5; ANSI/SAE Z26.1, 5.16; MIL-STD-810F (Method 505)
ASTM D1003, Method B Haze and Transmittance of Transparent Plastics ASTM D2244 Calculation of Color Differences from Instrumentally Measured Color Coordinates ISO 4582 Plastics — Determination of changes in colour and variations in p
ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ASTM D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting ASTM D1037 Standard test methods for evaluati