9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D1003 testing. These labs commonly handle Plastics matrices. From the accredited scope text: “ASTM D1003-21 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities ASTM F1450-12a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric A” “ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ASTM E1331 Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry BS 2782-5 Determin” “ASTM D1003 Hardness Rockwell Hardness Testing Scales: (HRB, HRC, HR15N) ASTM E18 Helmets Motorcycle Helmets DOT FMVSS 218; 49 CFR 571.218 Section 7.1 Mass per Unit Area (Weight) of Woven Fabric ASTM D” “ASTM D1003, Method B Haze and Transmittance of Transparent Plastics ASTM D2244 Calculation of Color Differences from Instrumentally Measured Color Coordinates ISO 4582 Plastics — Determination of chan”
Salem, OR, US
ASTM D1003-21 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities ASTM F1450-12a Standard Test Methods for Mass Per Unit Area (Weight) of Fabric ASTM D3776/D3776M-20 Standard Test Me
Oldsmar, FL, US
ASTM D1003 (Except Procedure B) Standard Test Method for Rate of Burn and/or Extent and Time of Burning of Plastics in a Horizontal Position ASTM D635-981 1The laboratory is only accredited for the test methods and standards
Brunswick, OH, US
ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ASTM E1331 Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry BS 2782-5 Determination of Haze of Film and Sheet (Me
Sterling Heights, MI, US
Test Standard Fogging FORD FLTM BO116-03, GM 9305P; GMW 3235; HYUNDAI MS210-05 (4.11); RIVIAN RTS.1755; SAE J1756; TOYOTA TSM0503G Method B, BSDM0503 Method B Fuel Resistance DSM ESX-62310 (4.12), ESX
Harper Woods, MI, US
ASTM D1003, ASTM D1455; Ford FLTM BI 110-01, FLTM BI 010-02; Honda HES D6501; ISO 2813 Hardness ASTM D785 (R Scale), ASTM D2240 (Shore A, D), ASTM D3363; Ford FLTM BI 151-01; Honda HES D6501; ISO 48-4, ISO 868, ISO 2039-2, ISO 7
Fullerton, CA, US
ASTM D1003 Hardness Rockwell Hardness Testing Scales: (HRB, HRC, HR15N) ASTM E18 Helmets Motorcycle Helmets DOT FMVSS 218; 49 CFR 571.218 Section 7.1 Mass per Unit Area (Weight) of Woven Fabric ASTM D3776, Option C Thickness o
Kentwood, MI, US
ASTM D1003; ASTM F801; ASTM F2156 Temperature Shock ATPD 2352, 3.3.4, 4.3.4; ANSI/SAE Z26.1, 5.2, 5.15; MIL-STD-810F (Method 503.4) Sun Exposure/Weathering ATPD 2352, 3.3.5, 4.3.5; ANSI/SAE Z26.1, 5.16; MIL-STD-810F (Method 505)
Wittmann, AZ, US
ASTM D1003, Method B Haze and Transmittance of Transparent Plastics ASTM D2244 Calculation of Color Differences from Instrumentally Measured Color Coordinates ISO 4582 Plastics — Determination of changes in colour and variations in p
Nappanee, IN, US
ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ASTM D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting ASTM D1037 Standard test methods for evaluati
This page is a fixed slice of the register: every ASTM D1003 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.