ASTM D3359 Accredited Testing Labs Worldwide

ASTM D3359; Ford FLTM BI 106-01; GMW 14829; ISO 2409 Abrasion – Taber GMW 3208 Blistering of Paints ASTM D714 Checking Evaluation ASTM D660 Chemical Resistance to Fluids GMW 14334, Code A and B only Chip Resistance – Gravel

ASTM D3359; FED-STD-141 (Method 6301.3); MIL-DTL-5541; MIL-PRF-23377; ASTM D823 (Method D)

ASTM D3359; FLTM BI 106-01; GMW14829; GMW15851; ISO 2409; NES M0007 [2014-N], Sect. 29; NES M0141[2018-N], Sect. 6.2.4; TS 371-00-004 [2017], Sect. 7 & 8; TSM0501G [REV. 16], Sect. 9.22 Coating Weight ASTM A90; ASTM B680

ASTM D3359 Measuring Adhesion by Tape Test ASTM D3679 Standard Specifications for Rigid Poly (Vinyl Chloride) (PVC) Siding (Sections 6.10, 6.11, and 6.13) ASTM D4141 Conducting Accelerated Outdoor Exposure Tests of Coatings (Proc. A

3 Adhesion behavior of coatings 3.1 Evaluation of the degree of blistering on coati ngs by comparison with images [Flex B] DIN EN ISO 4628 -2 2016-07 Paints and varnishes - Evaluation of degradation of coatings - Designation of qua

Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 PRIDGEON & CLAY ADVANCED ENGINEERING LAB 50 Cottage Grove SW Grand Rapids, MI 49507 Brandon Luxford Phone: 616-252-2384 MECHANICAL Valid To: July 31, 2026 Certificate

ASTM D3359; FED-SPEC-141C Twist Test ASTM A938, ISO 7800 Wrap Test ASTM A370 (A4.7) Evaluation of the Degree of Blistering of Paints ASTM D714 Stress Rupture (Up to 1500) °F w/ Smooth, Notch and Combination (Combo) Bars A

ASTM D3359, D1654; NES M 0007 (2006-N); LP 63PB 15 01 CHG A; FLTM BI 104-01, 106-01; HES D2016-99, HES D 6501-03 C Rev. 2; DAIMLER DBL 7399 Taber Abrasion / Scuffing / Marring 2 MIL-M-13231 (Markings); ASTM D4060; G

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MICHIGAN TESTING INSTITUTE, INC. 44249 Phoenix Drive Sterling Heights, MI 48314 Melody Wostyn Phone: 586 731 2230 MECHANICAL Valid To: August 31, 2027 Certificate Number: 041

ASTM D3359 (Method A and B) Film Hardness by Pencil Test ASTM D3363 Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) ASTM D2794 Abrasion Resistance of Organic Coatings by the Taber Abraser ASTM D4060 Coating

ASTM D3359 Taber Abrasion ASTM D4060 Hexavalent Chromium Analysis ASTM D6492; Aptiv DX900359; GMW3034; ISO 3613

ASTM D3359 Measuring Adhesion by Tape Test Additional Standards LABORATORY ACCELERATED WEATHERING: TESTING WITH XENON ARC LAMPS ASTM D3424 (Method 3 & 4) Lightfastness and Weatherability of Printed Matter (Withdrawn 2020) ASTM

ASTM D3359; ISO 2409; GM 9071P (Inactive 2012); GMW14829 Adhesion by Heated Quenching Test GMW3044 - Sec. 3.3 Ductility ASME B18.6.3, B18.6.5M; F.I.P. 1000; SAE J78, J81, J1237; ISO 7085; DIN 7500-1; ISO 2702 Torque Strength ASME

ASTM D3359 Peel Strength Test ISO 21809-3 Annex H; ISO 21809-1 Annex C; EN 12068 Thickness ISO 2808 method 7B2; ASTM B499; ASTM A775; ASTM D7091; ISO 21809-1 Annex A; ISO 21809-3 Annex B Environmental Simulation Fluorescent Ultr

ASTM D3359 Standard Practice for general Techniques for Obtaining Infrared Spectra for Qualitative Analysis/FT-IR Test for Lubricants ASTM E1252/NSF 8182 Standard Test Method for Determining the Izod Pendulum Impact Resistance of Plast

ASTM D3359 Altitude (Barometric Pressure) Temperature Altitude Range: Up to 100,000 ft (-65 to 150) ºC MIL-STD 810 E, F, G, H Methods 500, 520; MIL-STD 202 G Method 105; MIL-STD 883 G, H Method 1001; MIL-STD 1344 A Me

ASTM D3359 Test Methods for Measurin g Adhesion by Tape Test ASTM D3386-00 Test Method of Coefficient of Linear Thermal Expansion of Electrical Insulating Materials (Withdrawn 2005) ASTM D3410/3410M Test Method for Compres

ASTM D3359; FS 141-6301; ISO 2409 Bend Test Cylindrical Mandrel ISO 1519 Breaking Strength and Elongation of Pressure Sensitive Tape (Procedure A) ASTM D3759/3759M Climbing Drum Peel for Adhesives ASTM D1781 Color Measuremen

ASTM D3359, ASTM D5402; Chrysler LP-463LB-19-01; Ford FLTM BI 104-04, FLTM BI 106-01; GM4489P (1997), GM9160P (2015), GM9502P (1988), GM9506P (1988), GM9507P (1988); GMW14333, GMW14829, GMW15891, GMW16745, GMW16746; Honda HES D65

ASTM A 923 2014 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Einschränkung auf: Method C - Ferric Chloride Corrosion Test for Classification of Structures of Duplex

ASTM D3359; DIN EN ISO 2409; FLTM BI 106-01; Fuji TS430-07-089; GM 9071P (superseded 2012)1; HES D6501 Section 3.6; GMW14829; Inteva MX900161; ISO 2409; JIS K5600-5-6; Navistar MPAPS GT-Paint GT-5A; NES M0007 Section 29 Water

ASTM D3359, ASTM D4541, ASTM D5179, EN 12068, ISO 2409, ISO 4624, ISO 6272-1, ISO 12944-6, ISO 12944-9, NORSOK M-501, ISO 21809-1, ISO 21809-2, ISO 21809-3 AM

ASTM D3359; FED-STD-141; MIL-C-83488; SAE J207 Coating Thickness – Microscopic Method ASTM B487 Coating Weight MIL-A-8625 Porosity AMS 2460 Specimen Preparation1 Heat Treat SOP 63.002 Low Stress Grinding and Polishing2 GE P1TF79

ASTM D3359 Compression Up to 100 kN ISTA Procedures 2A, 2B, 6A, 6B, 6-FedEx-A, 6-FedEx-B Acceleration (1 to 250) gn (1 000 to 20 000) gn gn = standard acceleration of the gravity MIL-STD-810F and 810G, Method 513.8; MIL-STD-88

ASTM D3359 Coating Thickness - Optical ASTM B487 Coating-Electroplated Microhardness ASTM B578 Coating Weight ASTM A90/A90M, A428/A428M, B137; MIL- A-8625; MIL-DTL-16232

ASTM D3359; ISO 2409 Tensile / Compression Capacity – 5 N to 19 kN Test Speed: (0.1-300) mm/min USCAR 21 Sec. 4.4; ISO 6892; ASTM D695; ASTM E8/E8M; PF.90051 Section 6.3.2 1This scope meets A2LA’s P112 Flexible Sc

ASTM D3359; Chrysler LP-463PB-15-01; FLTM BI 106-02, BI 106-1; GMW14829; GMW14695; GM 9071P; GM 9160P; GM 9502P; ISO 2409; DBL 5578 (Section 7.5); MBN 10494-5 (Sections 5.1 & 5.4); GMW16185

ASTM D3359 Altitude (Barometric Pressure) Temperature Altitude (-1,500 to 70,000) ft (-70 to 140) ºC (-50 to 80) oC 8,000 to 55,000 ft. MIL-STD-810E, Method 500.3; MIL-STD-810F, Method 500.4

ASTM D3359; ASTM D4541 (A4, Method E); FED-STD-141 (Method 6301.3); Ford FLTM BI 106-01; Fuji/Subaru TS430-07-082 (9.5); GM 9071P (2002); GMW14829; Harley Davidson ES805-07012 (6.3); Honda 4251Z-SEP-A000 (5.1); Honda 5100Z-SE0-000

ASTM D3359 Reference Tape

ASTM D3359; Honda HES D2008, D2016, D2021, D2028, D6501 (3.6), Honda 5100Z-SGO-A000, Honda 5100Z-SEO-000, Honda 5100Z-TR0-6001, 5100Z-3MAA-8000, 5100Z-3MAA-6000, 9000Z-T2A-A000 Pencil Hardness ASTM D3363; Honda HES D2008, D2016, D20

ASTM D3359 Measuring Adhesion by Tape Test Additional Standards OUTDOOR WEATHERING: Q-RACK TESTING ASTM D1006 Exterior Exposure of Paints on Wood ASTM D1014 Exterior Exposure of Paints on Steel ASTM D1435 Outdoor Weathering of Plas

ASTM D3359 -23 2023 Standard Test Methods for Rating Adhesion by Tape Test DIN EN ISO 1519 2011-04 Paints and varnishes – Bend test (cylindrical mandrel) DIN EN ISO 2409 2020-12 Paints and varnishes – Cross-cut test

ASTM D3359; FLTM BI 106-01; GMW 14829; ASTM D522; ISO 2409 Gloss/Haze Measurements ASTM D523 Evaluations ASTM D610; ASTM D714; GMW 15356; GMW 15357; GMW 15358; GMW 15359; ASTM D1654; GMW 15282 Water Immersion ASTM D870; FLTM BI 104-0

ASTM D3359 Standard Test Methods for Rating Adhesion by Tape Test ASTM D3450 Standard Test method for Washability Properties of Interior Architectural Coatings ASTM D3500 Standard Test Methods for Structural Panels in Tension (only

ASTM D3359; ISO 1518-01; GMW 14829; ISO 1518; ISO 2409 Chemical Resistance ASTM D1308; GMW 3402; FLTM BN 112-08; LP463PB-31-01 Flammability (Horizontal) FMVSS 302; GB-8410; DBL 5307; GS 97038; ISO 3795; TL1010 Scratch Pen

ASTM D3359, ISO 2409 Adhesive Peels ASTM D903; MW 14892; PF-90223 (Peel Strength), RTS 1806 Ash Content ISO 3451-1 (Method A), ISO 1172 (Method A) Chemical Resistance PF-11203; FLTM BN 112-08; LP-463PB-31-01 Color Evaluation WSS-M1