ASTM E562 Accredited Testing Labs Worldwide

ASTM E562 Pyrometry (Heat Treatment) AMS 2750 Determining Hardenability of Steel ASTM A255 (sections 6.2 to 6.4.1.1) Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Sol

Apave Italia CPM Srl - Laboratorio Prove Meccaniche UNI CEI EN ISO/IEC 17025:2018 Allegato al certificato di accreditamento n. 00482 rev. 5 del 17/09/2025 Via Artigiani, 63 25040 Bienno BS Revisione: 28 Sede A Data: 10/11/2025 p

ASTM E562-19e1 Microscopia ottica Prove di piegamento/Bend test ASTM E290-22 _ Prove di resilienza su provetta Charpy/Charpy pendulum impact test (0.5 J ÷ 450 J (da temperatura ambiente a -196°C)) UNI EN ISO 148-1:2016 Pendolo di Ch

ASTM E562; MCL III 237.06 Heat Treatment Solution/Incipient Melting Measurement ASTM E562; MCL III-274 Wrought Titanium Microstructure MCL III-273 Micro Porosity by Image Analysis and Point Count MCL III-270, ASTM E562 O

ASTM E562 CON Austenite Spacing ASTM E112 Documented In-House Method ITP MET 003 CON Inclusion Content ASTM E45 Methods A & D CON Micros Structure Assessment ASTM A923 (Method A) CON Ferrite determination (Au

ASTM E562-19e1 Microscopia ottica Prove di piegamento/Bend test (0°-180°) Prove di piegamento/Bend test (0°-180°) ISO 7438:2020 ASTM E290-22 _ _ Prove di resilienza su provetta Charpy/Charpy pendulum impact test (0÷450 J) ISO 14

ASTM E562 Determination of Delta Ferrite Content AMS 2315, US NRC Reg. Guide 1.31 Case Depth SAE J423 Grain Size ASTM E112 (Method A & D), E930, E1181 Inclusion Content ASTM E45 (Method A) Intergranular Attack/Corrosion

ASTM E562-19e1 Microscopia ottica

Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60

ASTM E562 Ferrite Number determination by Ferrite scope AWS A4.2 Corrosion Tests: Detection of Susceptibility to Intergranular Corrosion Detection of Detrimental Intermetallic Phases Detection of Pitting & Crevice Corrosion Re

ASTM E562 Inclusion Rating / Microcleanliness ASTM E45 (Method A & D), ISO 4967 Metallographic Specimen Preparation ASTM E3 Macro / Micro Etch ASTM A561, A604, E340, E381, E407 Photomicrography ASTM E883 Plating Thickness / Coating Th

ASTM E562-19e1 _ _ _ _ _ _ _ _ Esame visivo Microscopia ottica ASTM E1268-19 _

ASTM E562 Grain Size ASTM E112, E930, E1181 Graphite Type and Distribution ASTM A247 Macroscopic Preparation/Examination ASTM A561, A604, E381, E340; AMS 2433; GM4460P Specimen Preparation ASTM E3, E407 Microcleanliness ASTM E45 (

ASTM E562-19e1 Tecnica di prova O&I Microscopia ottica Materiali metallici/Metallic materials - solo/only Ferrosi e non ferrosi/Ferrous and non- ferrous Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I

ASTM E562 -19 2019 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count MH, HH ASTM E930 -18 2018 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (A

ASTM E562-19e1 + ASTM E1245-03(2023) Microscopia ottica Esame microscopico/Microscopic examination ASTM E3-11(2017) + ASTM E407-23 Microscopia ottica

ASTM E562:2019e1 Metalliska material Kornstorlek ASTM E112:2024 Metalliska material SS-EN ISO 643:2020 Metalliska material Strukturprovning ASTM A923:2023 Stål Metod A Ytjämnhet SS-EN ISO 4288:1998 Metalliska material Förändrade omfattnings

ASTM E562, E1245 ASTM B487 Ambient Temperature Tensile 600,000 lbs Capacity ASTM A370, A770, B557, E8/E8M, E111; NASM 1312-18 Compression 600,000 lbs Capacity ASTM E9, F36 Weld/Braze Operator/Procedure Qua

ASTM E562 Grain Size (By Comparison) ASTM E112 Micro preparation and Examination ASTM E3, ASTM E407 Inclusion Count ASTM E45 Degree of Banding and Orientation of Microstructures ASTM E1268 Replication of Microstructures ASTM E1351

ASTM E562 2019 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count DIN EN ISO 17639 2022-05 Destructive tests on welds in metallic materials – Macroscopic and microscopic examination of welds

ASTM E562

3 Metallographische Untersuchungen DIN 50602 1985 -09 Metallographische Prüfverfahren - Mikroskopische Prüfung von Edelstählen auf nichtmetallische Einschlüsse mit Bildreihen DIN EN ISO 643 2020 -06 Stahl - Mikrophotographisch

ASTM E562-19e1 Tecnica di prova O&I Microscopia ottica Metodo di prova Tecnica di prova O&I EN ISO 148-1:2016 Pendolo di Charpy Prove di trazione a temperatura ambiente/Tensile testing at room temperature (0-400 kN) EN ISO 6892-1:

ASTM E562 /

ASTM E562 2019 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count ASTM E340 2015 Standard Practice for Macroetching Metals and Alloys ASTM E407 2007 (2015) Standard Practice for Microetching

ASTM E562 Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (Method A) ASTM G48 Salt Spray (fog) Test (including testing of Chemical Conversion Coatings on Al and

ASTM E562-19e1 Microscopia ottica ASTM E290-22 ISO 7438:2020, UNI EN ISO 7438:2020 ISO 148-1:2016, UNI EN ISO 148-1:2016 _ _ Pendolo di Charpy Prove di resilienza su provino intagliato/Notched bar impact test ASTM E23-25 Pendolo d

ASTM E562-19e1 + ASTM E1245-03(2023) Microscopia ottica Determinazione della dimensione media del grano/Determining average grain size ASTM E112-24 Microscopia ottica Durezza Brinell/Brinell Hardness (HBW 2,5/62,5 - HBW 2,5/187,5) UN

ASTM E562 Weld Weld Procedure/Welder Qualification ASTM E8/E8M, ASTM E190, ASTM E290, ASTM E23, ASTM E208 in accordance with AWS B4.0 Fillet Weld Test AWS B4.0 Chemical Properties Glow Discharge Atomic Emissio

ASTM E562 Grain Size (Comparison Method Only) ASTM E112 Inclusion Rating / Cleanliness ASTM E45 Methods A & D; SAE J422 Microhardness ASTM E384, E92 Vickers (100g, 500g, 1000g) Microstructure ASTM E1268; ASM Metals Handbook, Volume 9

ASTM E562-19e1 Microscopia ottica Materiali metallici ferrosi/Ferrous metallic materials Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Esame microscopico/Microscopic examination Materiali metallici/

ASTM E562 BR, AM 29 Grain size determination SOP 30-03 ISO 643, ASTM E112, AFNOR NFA 04-102 BR, AM 30 Microstructures analysis (magnification up to 1000x) SOP 30-05 ASTM E 3, 45, 112, 247, 381, 384, 562, 883, 930, 1077, SAE J4

ASTM E562 2019 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count DU II 3 Corrosion tests [Flex A] DIN EN ISO 3651 -1 1998-08 Determination of resistance to intergranular corrosion of stai

ASTM E562-19e1 Tecnica di prova O&I Microscopia ottica Metodo di prova UNI 3138:1984 UNI 3137:1965 Tecnica di prova O&I Esame visivo Microscopia ottica Metodo di prova Tecnica di prova O&I Controllo con liquidi penetranti per

ASTM E562-19 Wyroby hutnicze po azotowaniu Głębokość warstwy utwardzonej Grubość warstwy białej Mikroskopia optyczna PN-82/H-04550 PN-EN ISO 18203:2022-09 Żeliwo Mikrostruktura Mikroskopia optyczna PN-EN ISO 945-1:2019-09 ASTM A247

This document is a translation. The definitive version is the original German annex to the accreditation certificate. DIN EN ISO 6892-2 2018-09 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (h

ASTM E562 Intermetallic Phase ASTM A923-A Inclusion Content (Method A) ASTM E45 Intergranular Corrosion ASTM G28-A, G48-A, A262-E, A262-C, A923-C; DIN EN3651-A

ASTM E562 /

ASTM E562 Intergranular Corrosion ASTM A262, Practice A Failure Analysis Using the methods listed above in accordance with ASM Handbook Volume 11

ASTM E562; AMS 2315 Estimating Depth of Decarburization of Steel Specimens ASTM E1077, F2328, F835; ISO 898-1; ISO 898- 5; SAE J419 Evaluating Graphite Microstructure in Iron Castings ASTM A247 Macroetching ASTM E381, A604/A604M Mic

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TC INDUSTRIES TEST CENTER 3703 S. Route 31 Crystal Lake, IL 60012 Ken Rueff Phone: 815 333 8343 MECHANICAL Valid To: February 28, 2027 Certificate Number: 1281.01 In re

ASTM E562-19e1 Microscopia ottica Prova di criccatura indotta da idrogeno (HIC)/Hydrogen-induced cracking test (HIC) ANSI/NACE TM 0284-2016 Prova di criccatura sotto tensione in acido solfidrico (SSC)/Sulfide stress cracking (SSC) Prov

ASTM E 112 2013 Standard Test Methods for Determining Average Grain Size DIN EN ISO 18203 2022-07 Stahl - Bestimmung der Dicke gehärteter Randschichten DIN 50602 1985-09 Metallographische Prüfverfahren - Mikroskopische Prü

ASTM E562-19e1 Cast iron Evaluation of Microstructural Graphite ASTM A247--24 Weldments Tests designated in specified Welding Codes as detailed below: - Bend, Fracture, Hardness, Impact, Tensile, Macro and Micro

ASTM E562 ED, ZO Schweißnaht- geometrie Schweißnaht DIN EN ISO 15614 -1 ZO DIN EN ISO 17639 ZO Dicke gehärteter Randschichten Stahl DIN EN ISO 18203 ZO Metallographie/ Härteprüfung Entkohlungstiefe Stahl DIN EN ISO 3887 ZO Schicht

ASTM E562-19e1 Microscopia ottica Materiali a base acciaio destinati a venire in contatto con gli alimenti/Steels materials intended to come into contact with foodstuffs Denominazione della prova / Campi di prova Metodo di prova Tecnic

ASTM E562; SAE AMS 2315 Weld Procedure and Weld Operator Qualification AWS B4.0 (Part A-D): D1.1, D1.2, D1.5, D1.6; ASME Section IX; NAVSEA S9074-AQ-GIB-010/248

ASTM E562-19e1 Microscopia ottica Prova di criccatura indotta da idrogeno (HIC)/Hydrogen-induced cracking test (HIC) ANSI/NACE TM 0284-2016 Prova di criccatura sotto tensione in acido solfidrico (SSC)/Sulfide stress cracking (SSC) Prov

ASTM E562 Depth of Decarburization ASTM E1077; SAE J419 Grain Size ASTM E112 Coating Testing Coating Weight ASTM A90; ASTM B767 Environmental/ Corrosion Testing Corrosion ASTM C1617; ASTM B858; Chrysler LP- 463PB-52-01; LP463PB-22-

TENSLAB Laboratorium Badań Materiałowych ul. Śnieżna 5, 80-554 Gdańsk Przedmiot badań/wyrób Rodzaj działalności/badane cechy/metoda Dokumenty odniesienia Złącza spawane Właściwości mechaniczne: - Największa siła F m - Wytrzymałość na r