ISO 10360 Accredited Testing Labs Worldwide
ISO 10360, all parts. Each lab card shows which parts it holds.
- ISO 10360-2Part 2: CMMs used for measuring linear dimensions9 labs →
- ISO 10360-5Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode5 labs →
- ISO 10360-7Part 7: CMMs equipped with imaging probing systems3 labs →
- ISO 10360-8Part 8: CMMs with optical distance sensors1 lab →
- ISO 10360-9Part 9: CMMs with multiple probing systems1 lab →
- ISO 10360-12Part 12: Articulated arm coordinate measurement machines (CMM)2 labs →
- ISO 10360-13Part 13: Optical 3D CMS1 lab →
10 accredited laboratories in 4 countries hold ISO 10360 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation.
Available in 4 Countries
Top analytes for ISO 10360
- Diameter (1)
- Length (1)
- Length Measurements (1)
Sample labs
ISO 10360-12 Test sphere (Annex D) Test sphere (6.2) Test sphere (6.2) Test sphere (6.3) Nest bar with conical seats (6.4) Articulating Arm Coordinate Measurement Machine with Optical Distance Sensor or Las
ISO 10360-2:2009 gage blocks ISO 10360-2-2009 gage blocks Vision System – Length Measurement Error 3- EL X & Y axis Up to 500 mm (2.0 + 3.9L) µm ISO 10360-9 glass scales Articulated Arm CMM Volumetric P
ISO 10360-2 using gage block Laser interferometer Note: ISO 10360-2 tests both volumetric and linear scale accuracy. Probing Error3 (CMM) 30 mm 0.18 µm ISO 10360-5 using master sphere Angle3 – Machine Tools
ISO 10360-7 (Unidirectional) Glass scales Glass scales Gage blocks Ball bar Test circles CMMs3 – Length Error (EL) Repeatability Range (R 0) Up to 52 in Up to 52 in 40 µin + 5.2 min/i
ISO 10360-2 sections 6.3.3, 6.4 and 6.5: Step gage and gage blocks Gage blocks, Renishaw laser ISO 10360-5:2010 Section 6.2: Test sphere Optical Comparators & Vision Systems3,5 – X & Y Axis Length Er
ISO 10360-2 and -5 Reference sphere per ISO 10360-2 and -5 Check Master per ISO 10360-2 and -5 Check Master per ISO 10360-2 and -5 Laser interferometer per ISO 10360-2 and -5 Ball bar per ISO 10360- 2 and -5 Line
ISO 10360-2 ASME B89.4.10360.2: Laser interferometer & gage blocks Gage blocks ISO 10360-5:2010 Test sphere ISO 10360-5:2020 Test sphere
ISO 10360-2 1When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current version for a period of one year from the date of publication of
ISO 10360-2 2009 edition and 2001 edition Optic Coordinate Measuring Machines 10, 11 Length Measurement Error: EUXY EUZ Squareness Error: ESQ Probing Error: PF2D PFV2D Up to 600 mm (0.25 +
ISO 10360-2 using gauge block ISO 10360-2 using gauge block ISO 10360-5 using sphere ANSI/ASME B89.4.1b-2001 Ball bar ANSI/ASME B89.4.1b-2001 Laser ANSI/ASME B89.4.1b-2001 ISO 10360-2 ____________________________