ISO 10360 Accredited Testing Labs Worldwide
ISO 10360, all parts. Each lab card shows which parts it holds.
- ISO 10360-2Part 2: CMMs used for measuring linear dimensions9 labs →
- ISO 10360-5Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode5 labs →
- ISO 10360-7Part 7: CMMs equipped with imaging probing systems3 labs →
- ISO 10360-8Part 8: CMMs with optical distance sensors1 lab →
- ISO 10360-9Part 9: CMMs with multiple probing systems1 lab →
- ISO 10360-12Part 12: Articulated arm coordinate measurement machines (CMM)2 labs →
- ISO 10360-13Part 13: Optical 3D CMS1 lab →
10 accredited laboratories in 4 countries hold ISO 10360 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation.
Available in 4 Countries
Top analytes for ISO 10360
- Diameter (1)
- Length (1)
- Length Measurements (1)
Sample labs
ISO 10360-2:2009 gage blocks ISO 10360-2-2009 gage blocks Vision System – Length Measurement Error 3- EL X & Y axis Up to 500 mm (2.0 + 3.9L) µm ISO 10360-9 glass scales Articulated Arm CMM Volumetric P
ISO 10360-2 using gage block Laser interferometer Note: ISO 10360-2 tests both volumetric and linear scale accuracy. Probing Error3 (CMM) 30 mm 0.18 µm ISO 10360-5 using master sphere Angle3 – Machine Tools
ISO 10360-7 (Unidirectional) Glass scales Glass scales Gage blocks Ball bar Test circles CMMs3 – Length Error (EL) Repeatability Range (R 0) Up to 52 in Up to 52 in 40 µin + 5.2 min/i
ISO 10360-2 sections 6.3.3, 6.4 and 6.5: Step gage and gage blocks Gage blocks, Renishaw laser ISO 10360-5:2010 Section 6.2: Test sphere Optical Comparators & Vision Systems3,5 – X & Y Axis Length Er
ISO 10360-2 and -5 Reference sphere per ISO 10360-2 and -5 Check Master per ISO 10360-2 and -5 Check Master per ISO 10360-2 and -5 Laser interferometer per ISO 10360-2 and -5 Ball bar per ISO 10360- 2 and -5 Line
ISO 10360-2 ASME B89.4.10360.2: Laser interferometer & gage blocks Gage blocks ISO 10360-5:2010 Test sphere ISO 10360-5:2020 Test sphere
ISO 10360-2 1When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current version for a period of one year from the date of publication of
ISO 10360-2 2009 edition and 2001 edition Optic Coordinate Measuring Machines 10, 11 Length Measurement Error: EUXY EUZ Squareness Error: ESQ Probing Error: PF2D PFV2D Up to 600 mm (0.25 +
ISO 10360-2 using gauge block ISO 10360-2 using gauge block ISO 10360-5 using sphere ANSI/ASME B89.4.1b-2001 Ball bar ANSI/ASME B89.4.1b-2001 Laser ANSI/ASME B89.4.1b-2001 ISO 10360-2 ____________________________