ISO 10360 Accredited Testing Labs Worldwide
ISO 10360, all parts. Each lab card shows which parts it holds.
- ISO 10360-2Part 2: CMMs used for measuring linear dimensions9 labs →
- ISO 10360-5Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode5 labs →
- ISO 10360-7Part 7: CMMs equipped with imaging probing systems3 labs →
- ISO 10360-8Part 8: CMMs with optical distance sensors1 lab →
- ISO 10360-9Part 9: CMMs with multiple probing systems1 lab →
- ISO 10360-12Part 12: Articulated arm coordinate measurement machines (CMM)2 labs →
- ISO 10360-13Part 13: Optical 3D CMS1 lab →
10 accredited laboratories in 4 countries hold ISO 10360 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation.
Available in 4 Countries
Top analytes for ISO 10360
- Diameter (1)
- Length (1)
- Length Measurements (1)
Sample labs
ISO 10360-7 (Unidirectional) Glass scales Glass scales Gage blocks Ball bar Test circles CMMs3 – Length Error (EL) Repeatability Range (R 0) Up to 52 in Up to 52 in 40 µin + 5.2 min/i
ISO 10360-2 and -5 Reference sphere per ISO 10360-2 and -5 Check Master per ISO 10360-2 and -5 Check Master per ISO 10360-2 and -5 Laser interferometer per ISO 10360-2 and -5 Ball bar per ISO 10360- 2 and -5 Line
ISO 10360-2 2009 edition and 2001 edition Optic Coordinate Measuring Machines 10, 11 Length Measurement Error: EUXY EUZ Squareness Error: ESQ Probing Error: PF2D PFV2D Up to 600 mm (0.25 +