14 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D714 testing. From the accredited scope text: “ASTM D714 Evaluating Degree of Blistering of Paints ASTM D772 Evaluating Degree of Flaking (Scaling) of Exterior Paints ASTM D1654 Evaluation of Painted or Coated Specimens to Corrosive Environments A” “ASTM D714-02; GB/T 2423.17 1 A2LA provides accreditation to the U.S. EPA’s Conditions and Criteria for Recognition of Laboratories for the ENERGY STAR Program by verifying an organization’s compliance” “ASTM D714 Stress Rupture (Up to 1500) °F w/ Smooth, Notch and Combination (Combo) Bars ASTM E139, E292; ISO 204; NASM 1312-14 Tensile: Room Temperature (RT) (Up to 400K for Ultimate Tension, Yield, El” “ASTM D714; VOLVO STD 420-0001 Breaking Strength ASTM D751 (Pro cedure A-Grab Test Method), (Procedure B-Cut Strip Method), ASTM D1000 (37-45, 110-115) Car Wash Simulation/Grained Surface Cleanability”
Flint, MI, US
ASTM D714 Checking Evaluation ASTM D660 Chemical Resistance to Fluids GMW 14334, Code A and B only Chip Resistance – Gravelometer ASTM D3170; GMW 14700, Methods B and C; SAE J400 Cold Checking Resistance Ford FLTM BI 107-02
Hillsdale, MI, US
ASTM D714; ISO 4628-2; VOLVO STD 420-0001 Conductivity Electrostatic Paintability Navistar MPAPS GT-Paint GT-18 Corrosion (Rating) ASTM D610; FCA CS.00081; GM 8101G (2009); GMW15356; GMW15357; GMW15359; ISO 4628-3; VOLVO STD 42
Broken Arrow, OK, US
Test Test Method(s) Metallographic Evaluation (cont’d) Microhardness Knoop (100 to1000) gf ASTM B578, E92, E384, F606/F606M; NASM 1312-6; NAVSEA S9074-GIB-010/248 Vickers (100 to 1000) gf ASTM B578, E92, E384, F606/F60
Suwanee, GA, US
ASTM D714; ISO 4628-2 Degree of Rusting ASTM D610 Fluid Resistance via Immersion, Drip, and Pooling at Room or Elevated Temperature for Acids, Adhesives, Alcohols, Alkali, Automobile Fluids (to include Antifreeze, Brake Fluid, Di
Cleveland, OH, US
ASTM D714 Stress Rupture (Up to 1500) °F w/ Smooth, Notch and Combination (Combo) Bars ASTM E139, E292; ISO 204; NASM 1312-14 Tensile: Room Temperature (RT) (Up to 400K for Ultimate Tension, Yield, Elongation, Reduction of
Wyoming, MI, US
Test Test Method(s) ENVIRONMENTAL SIMULATION (cont’d) Salt Spray / Acetic Acid Salt / Combined Thermal2 ASTM B117, B537, D610, D714, G85; GM4350M (superseded 2013 except Chip Resistance)2, GM4298P (su
Sterling Heights, MI, US
ASTM D714; VOLVO STD 420-0001 Breaking Strength ASTM D751 (Pro cedure A-Grab Test Method), (Procedure B-Cut Strip Method), ASTM D1000 (37-45, 110-115) Car Wash Simulation/Grained Surface Cleanability SUBARU TS371-00-004 (7.28),
Sylvania, OH, US
ASTM D714; ASTM D1654; DIN EN ISO 4628-2; DIN EN ISO 4628-3; DIN EN ISO 4628-8; GM 8101G (superseded 2009)1; GM 9102P (superseded 2010)1; GMW15282; GMW15357; GMW15359; ISO 4628-2; ISO 4628-3; ISO 4628-4; ISO 4628-5; ISO 4628-
Kentwood, MI, US
ASTM D714 Dimensional Stability GM 9230P; GM 9452P Fading AATCC 16.3 Falling Sand ASTM D968 (Method A); GM 9542P Gloss ASTM D523; FLTM BI 110.01; DIN 53236; DIN EN ISO 2813; MBN 10494-4 (Section 5.1) Chip Resistance ASTM D
Ridgway, PA, US
ASTM D714; ISO 4628-2 Evaluation of Painted/Coated/Plated Specimens ASTM B537; ASTM D1654; ASTM D4214; GM9102P (2010); GMW15282; ISO 4628-1; ISO 4628-8; ISO 10289 Rub Resistance Toyota TSH1502G Scratch Resistan
Tipp City, OH, US
ASTM D714 Degree of Rusting ASTM D610 Water Immersion ASTM D870; Honda HES D2008, D2016, D2021, D2028, Honda 5100Z-SGO-A000 (6-8, 6-10), Honda 5100Z-SEO-000 (6-7, 6-9), Honda 4251Z-SEP-A000 (Section 5), Honda HES D6501 Sections 3.1
Wittmann, AZ, US
ASTM D714 Evaluating Degree of Blistering of Paints ASTM D772 Evaluating Degree of Flaking (Scaling) of Exterior Paints ASTM D1654 Evaluation of Painted or Coated Specimens to Corrosive Environments ASTM D1729 Visual Evaluation of Color
Guangzhou, US
ASTM D714-02; GB/T 2423.17 1 A2LA provides accreditation to the U.S. EPA’s Conditions and Criteria for Recognition of Laboratories for the ENERGY STAR Program by verifying an organization’s compliance to A2LA document R222 - Specifi
Nappanee, IN, US
ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints ASTM D732 Standard Test Method for Shear Strength of Plastics by Punch Tool ASTM D751 Standard Test Methods for Coated Fabrics ASTM D756 Standard Practi
This page is a fixed slice of the register: every ASTM D714 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.