11 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ISO 6892-1 testing. These labs commonly handle Metal matrices. Most frequently tested analytes via this method in United States: Hardness. From the accredited scope text: “ISO 6892-1, 6892-2; NASM 1312-8 N Value ASTM E646 R Value ASTM E517 Tensile Strength (Elevated Temp, Up to 2000) °F ASTM E21; EN 10002-5, 2002-2; ISO 6892-2; NASM 1312-18 Tension (Axial and Wedge) AST” “ISO 6892-1; MIL-STD-1312-8, MIL-STD-1312-18; NASM 1312-8, NASM 1312-18; SAE J82, SAE J429 Wrench Torque Test of Externally Wrenched Nuts of Spline, Hexagon and Double Hexagon Wrenching Configuration N” “ISO 6892-1 R Value ASTM E517; ISO 10113 N Value ASTM E646; ISO 10275 Elevated Temperature (Up to 1500 °F) ASTM E21; NASM 1312-18; ISO 6892-2 Fastener: Blind Rivets IFI 114, IFI 135 Discontinuities AST” “ISO 6892-1; GMW 3335 Plastic Strain Ratio (r-value) ASTM E517; JIS Z2254; ISO 10113 Work Hardening Exponent (n-value) ASTM E646; JIS Z2253; ISO 10275 Rockwell Hardness (HRBW, HRC, HR30TW) ASTM E18, AS”
Broken Arrow, OK, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 ELEMENT BROKEN ARROW 3100 North Hemlock Circle Broken Arrow, OK 74012 Mia Atherton Phone: 918 258 6066 mia.atherton@element.com MECHANICAL Valid To: September 30, 2026 Ce
Cleveland, OH, US
ISO 6892-1 R Value ASTM E517; ISO 10113 N Value ASTM E646; ISO 10275 Elevated Temperature (Up to 1500 °F) ASTM E21; NASM 1312-18; ISO 6892-2 Fastener: Blind Rivets IFI 114, IFI 135 Discontinuities ASTM F788, F812; SAE J122, J123 (
Taylor, MI, US
ISO 6892-1; GMW 3335 Plastic Strain Ratio (r-value) ASTM E517; JIS Z2254; ISO 10113 Work Hardening Exponent (n-value) ASTM E646; JIS Z2253; ISO 10275 Rockwell Hardness (HRBW, HRC, HR30TW) ASTM E18, ASTM A370 Coating Weight
Cleveland, OH, US
ISO 6892-1, 6892-2; NASM 1312-8 N Value ASTM E646 R Value ASTM E517 Tensile Strength (Elevated Temp, Up to 2000) °F ASTM E21; EN 10002-5, 2002-2; ISO 6892-2; NASM 1312-18 Tension (Axial and Wedge) ASTM A370, A489, F541, F606/F606
Huntington Beach, CA, US
ISO 6892-1; MIL-STD-1312-8, MIL-STD-1312-18; NASM 1312-8, NASM 1312-18; SAE J82, SAE J429 Wrench Torque Test of Externally Wrenched Nuts of Spline, Hexagon and Double Hexagon Wrenching Configuration NASM 25027 Yield Strength of Full
Kentwood, MI, US
ISO 6892-1; EG-812-22612-204 Weld Evaluation GM 4488M, 6122M 4; Chrysler PS 9472; GMW14058 Glass Abrasion Resistance ATPD 2352, 3.3.6, 4.3.6; ANSI/SAE Z26.1, 5.17, 5.18 Bond Integrity ATPD 2352, 4.3.1.3
Tipp City, OH, US
ISO 6892-1 Plastic Strain Ratio – Drawability (r-value) ASTM E517 Tensile Strain - Hardening - Formability (n-value) ASTM E646 Tension Testing Wrought & Cast Aluminum Products ASTM B557
Phoenix, AZ, US
ISO 6892-1 Volume Fraction by Point Count ASTM E562; SAE AMS 2315 Weld Procedure and Weld Operator Qualification AWS B4.0 (Part A-D): D1.1, D1.2, D1.5, D1.6; ASME Section IX; NAVSEA S9074-AQ-GIB-010/248
St. Paul, MN, US
ISO 6892-1; JIS B1051; NASM 1312-8; SAE J82 Bend, Guided and Semi-Guided (Welds) ASME Section IX; AWS D1.1/D1.1M, D1.2/D1.2M, D1.3/D1.3M, D1.4/D1.4M, D1.5/D1.5M, D1.6/D1.6M, D17.1/D17.1M, D17.3 Bend Test (General) ASTM A615/A615
Detroit, MI, US
Test Typical Test Method(s)2 Dynamic Cornering Fatigue Testing SAE J267, SAE J328, SAE J1095 Noise Testing Frequency (10 Hz to 20 kHz) SAE J2521 Sound Pressure Level (50 to 150) dBA SAE J2521 Hardness Testing B
Starkville, MS, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 STANDARD MECHANICS, LLC 907B Lynn Lane Starkville, MS 39759 Trey Leonard Phone: 662 546 1565 MECHANICAL Valid To: November 30, 2026 Certificate Number: 6853.01 In rec
This page is a fixed slice of the register: every ISO 6892-1 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.