9 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform MIL-STD-810 testing. From the accredited scope text: “MIL-STD-810 Environmental Engineering C onsiderations and Laboratory Tests: Method 501 Hi gh Temperature Method 502 Low Tem perature Method 507 Humidity MIL-STD-202 Test Methods for Electronic and Ele” “MIL-STD-810 Base, A, B, C, D, E, F, G, H, (Method 500); RTCA/DO-160 B, C, D, E, F, G (Section 4) Immersion MIL-STD-810 Base, A, B, C, D, E, F, G (Method 512); MIL-STD-202 E, F, G (Method 104); MIL-STD” “MIL-STD-810, Method 500 Bond Test FAA AC 150/5345, -26 Chemical Resistance FAA AC 150/5345, -42; 49 CFR 571.108; ATPD-2352T, Section 4.3.7 Circular Rotation Vibration, 1.0 diameter orbital path at 5Hz” “MIL-STD-810; UL 50E, Procedure 34 Degree of Protection IEC 60529 (Foreign objects & water; except IPX9); ISO 20653 (IP1X-6X); ISO 20653 (IPX1-X9); GMW3172, Sections 9.5.2 & 9.5.3; NEMA 250, Sections 5”
Tempe, AZ, US
MIL-STD-810 Base, A, B, C, D, E, F, G, H, (Method 500); RTCA/DO-160 B, C, D, E, F, G (Section 4) Immersion MIL-STD-810 Base, A, B, C, D, E, F, G (Method 512); MIL-STD-202 E, F, G (Method 104); MIL-STD-1344A (through Notice 6), (Meth
Easton, PA, US
MIL-STD-810, rev. E-H, Method 501 MIL-STD-810, rev. E-H, Method 502 MIL-STD-810, rev. E-H, Method 503; MIL-STD-202, Method 107 MIL-STD-883, Method 1010 RTCA/DO-160, rev. E-G, Section 4.5 IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-14, T
Glendale, CA, US
MIL-STD-810 MIL-DTL-38999 PRO08 Altitude (Up to 100,000 Feet) Temp (-65 to 200) °C EIA 364-03 DO-160 MIL-STD-810 MIL-DTL-38999 PRO19 Helium Leak Rate EIA-364-02 MIL-STD-38999 PRO03 Electrical Discontinuity 0.1, 1 and
Duluth, GA, US
MIL-STD-810, Method 500 Bond Test FAA AC 150/5345, -26 Chemical Resistance FAA AC 150/5345, -42; 49 CFR 571.108; ATPD-2352T, Section 4.3.7 Circular Rotation Vibration, 1.0 diameter orbital path at 5Hz (300rpm) MIL-STD-810 Compres
Los Angeles, CA, US
MIL-STD-810 Method 501 Low Temperature -300 °F RTCA-DO-160 (Sections 4.5.1); MIL-STD-810 Method 502 Thermal Cycling +392 °F to -300 °F RTCA-DO-160 (Section 5); MIL-STD-810 Method 503 On the following products and materials:
Duarte, CA, US
MIL-STD-810 Environmental Engineering C onsiderations and Laboratory Tests: Method 501 Hi gh Temperature Method 502 Low Tem perature Method 507 Humidity MIL-STD-202 Test Methods for Electronic and Electrical Compo
Mount Prospect, IL, US
MIL-STD-810; UL 50E, Procedure 34 Degree of Protection IEC 60529 (Foreign objects & water; except IPX9); ISO 20653 (IP1X-6X); ISO 20653 (IPX1-X9); GMW3172, Sections 9.5.2 & 9.5.3; NEMA 250, Sections 5.2, 5.3, 5.4, 5.11 & 5.12; UL 5
Kentwood, MI, US
MIL-STD-810 (G & H) Antimicrobial Coatings AATCC 100, 147; ASTM E1428, ASTM E2149, ASTM E2180 Fungal Identification ASTM D7658
Plano, TX, US
MIL-STD-810; GR-63-CORE; GR-487-CORE; IEC 60068-2-32Eb; GR-3108; GR-3178-CORE Bounce/Loose Cargo MIL-STD-810 Seismic 2 Servo Hydraulic Sine & Random 15,000 force pounds (1 to 500) Hz ANSI T1.329; GR-13-CORE; GR-49-CORE; GR
This page is a fixed slice of the register: every MIL-STD-810 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.