ASTM D256 Accredited Testing Labs Worldwide

ASTM D256; ASTM D6110 Ionic Cleanliness - Conductivity IPC-A-600; IPC-4202; IPC-6012; IPC-TM-650 (Methods 2.3.25.1 and 2.3.25); MIL-P-50884 2; MIL-PRF-50884 2; MIL-PRF-31032 2; MIL-PRF-55110 2 Mass and Thickness (Reusable B

ASTM D256 Vulcanized Rubber & Thermoplastic Elastometers – Tension ASTM D412 (Method A) Rubber Properties in Compression ASTM D575 (Method B) Conditioning of Plastics for Testing ASTM D618 Tensile Properties of Plastics ASTM D638

3.3 Biegeprüfungen ASTM D790 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ISO 178 2010-12 Kunststoffe ‒ Bestimmung der Biegeeigenschaften

ASTM D256, D4812, D6110 Mechanical Properties Tensile ASTM D412, D638, D695, D1414 (Section 8), D1708; ISO 527-1 Peel ASTM D1876, D3167 Shear ASTM D1002 Tear ASTM D624 Flexural Properties of Plastics AS

ASTM D256 (Method A) Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics ASTM D2990 Test Method for Tensile Properties of Plastics ASTM D638 Thermoplastic Sprinkler Pipe and Fittings for Fir

ASTM D256; ISO 180 Specular Gloss ASTM D523 Conditioning Plastics for Testing ASTM D618; ISO 291 Tensile Properties ASTM D638; ISO 527-1, -2 Deflection Temperature Under Flexural Load ASTM D648 (Method B); ISO 75-1, -2

ASTM D256; UL 746A (Section 13); CSA C22 No.17 (Section 6.3); ISO 180; JIS K7110, JIS K6911 (Section 5.21) Charpy Impact Test ASTM D6110; UL746A (Section 15); CSA C22 No.17 (Section 5.2); ISO 179-1; JIS K7111-1, JIS K6911 (Section

ASTM D256 Test Methods for Determinin g the Izod Pendulum Impact Resistance of Plastics ASTM D257 Test Methods for D-C Resistance or Conductance of Insulatin g Materials ASTM D297 Test Method for Rubber Products - Chemical Anal ysis

ASTM D256; JIS K7110, JIS K6911 (Section 5.21); ISO180; UL 746A (Section 13); CSA C22 No.17 (Section 5.3) Charpy Impact Testing ASTM D6110; JIS K7111-1, JIS K6911 (Section 5.20); ISO 179-1; UL746A (Section 15);

ASTM D256 (Izod) DMA ISO 6721-5 Instrumented puncture impact test - ISO 6603-2 - ASTM D3763 Static puncture test - ISO 12236 - ASTM D4833 Steam jet test DBL 5416 | ISO 16925 Impact resistance – free falling dart ISO 7765-1 Te

ASTM D256, Method A Test Method of Non-Pick-Up Time of Thermoplastic Traffic Line Material (Drying Time Wheel) ASTM D711 Density and Specific Gravity of Thermoplastics Traffic Line Material by Displacement ASTM D792, Method A Test Me

ASTM D256, ASTM D4812, ASTM D6110; DIN 53453; GMW14093, ISO 179, ISO 180; Rivian RTS.1776; Toyota TSM 0501G

ASTM D256 (Method A); ISO 180 (Type A Notched Specimens) Specular Gloss ASTM D523 Conditioning Plastics for Testing ASTM D618; ISO 291 Tensile Properties ASTM D638 (except A.3); ISO 527-1, -2; ISO 37 Heat Deflection Under L

ASTM D256; ISO 180; TSM0501G; NES M8020 (Section 7) Dynstat Impact DIN 53435 Charpy Impact ISO 179-1 Laminated Curl GM 9330P Low Temperature Flexibility Ford WSS-M99P32-B (Section 3.8) Melt Flow Rate ASTM D1238 (Method A); I

ASTM D256 Flexural Properties of Unreinforced/Reinforced Plastics and Electrical Insulating Materials ASTM D790 Tensile Properties of Plastics (except Poisson’s Ratio) ASTM D638 Density and Specific Gravity (Relative Density) of Pla

ASTM D256, Method A ASTM D4812 Melt Flow ASTM D1238 Tear Resistance ASTM D1004 Trouser Tear ASTM D1938

ASTM D256 Hardness of Metallic materials Brinell Hardness HBW 2.5/ 62Kg Rockwell B & C Micro Hardness: 100, 200, 300, 500, 1000gr 5k, 10K, 30K HV 1000 gr HK ASTM E10-18; ASTM E18-22; AST

ISO 75-1 2020-02 ISO 75-2 2013-04 ASTM D 648-18 2018 ISO 178 2019-04 ASTM D 790-17 2017 ISO 179-1 2010-06 ISO 180 2019-11 ASTM D 256- 23e1 2023 ISO 306 2022-11 ISO 527-1 2019-07 ISO 527-2 2012-02 ASTM D 638-22 2022 ISO 1133-1 2022-06 ASTM D

ASTM D256; ISO 180 Mode I Interlaminar Fracture Toughness ASTM D5528; GE: 4013367-058 Mode II End Notch Flex GE: 4013367-059; ASTM D7905 Mixed Mode ASTM D6671/D6671M Salt Fog/sea Salt Fog (w/SO2) ASTM B117, G

ASTM D256; ISO 180 Conditioning Plastics for Testing ASTM D618, ISO 291 Tensile Properties ASTM D638; ISO 527-1, -2 Deflection Temperature Under Flexural Load ASTM D648 (Method B); ISO 75-1, -2 Rockwell Hardness (Scale R)

ASTM D256 using: Optical comparator, 50x magnification Notch Cutter Machine – Radius Angle Cutter Speed Travel Length Travel Time 0.010 in (5 to 45)° (5 to 700) rpm (1 to 7) in 60 s

ASTM D256 ISO 180 (Method A) Melt Flow Rate ASTM D1238 (Method A) ISO 1133-1 S pecific Gravity ASTM D792 (Method A) ISO 1183-1 (Method A) Tensile Strength ASTM D638 (excluding Sections 11.3, 11.4 and 11.5) ISO 527-