ASTM D790 Accredited Testing Labs Worldwide

ASTM D790 Determining Dimensions of Thermoplastic Pipe and Fittin gs ASTM D2122 (Section 7.0) Determining Dimensions of “Fiberglass” (Glass-Fiber- Reinforced Thermosetting Resin) Pipe and Fittings ASTM D3567 (Section 6.0) S

ASTM D790 Monotonic & Other Mechanical Testing (-320 to 2500) °F in Air, Inert Gas, Saline; Up to 300,000 lbs; Up to 6 in Stroke Compression Testing ASTM E9 Fracture Toughness Testing ASTM B645, B646, E399, E561, E1304, E1820 Ten

ASTM D790; Range: (0 to 250) kN * IPC-4101; IPC-TM-650 (Method 2.4.4.1) Elevated Flex; UL 746A Flexibility and Folding IPC-6013; IPC-CC-830; IPC-SM-840; IPC-TM-650 (Methods 2.4.3 and 2.4.5.1); MIL-P 50884 2; MIL-PRF-50884 2;

ASTM D790 Density & Specific Gravity (Relative Density) of Plastics by Displacement ASTM D792 (Method A) Vicat Softening Temperature of Plastics (VST) ASTM D1525 Environmental Stress-Cracking of Ethylene Plastics ASTM D1

ASTM D790 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ISO 178 2010-12 Kunststoffe ‒ Bestimmung der Biegeeigenschaften ASTM D648 2018 Stan

ASTM D790; ISO 178; ISO 1209-1; NES M0141 [2018-N], Sect. 6.2.12; NES M7108[2005-N], Sect. 9; TSM0501G [REV. 16], Sect. 9.3 Mandrel Bend / Material Flexibility ASTM D1056; ASTM B571; ASTM D926; FLTM BI 009-05, HES D6506 [RE

ASTM D790 – 17 Standard Test Method for Flexural Pr operties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ASTM D792 – 20 Standard Test Methods for Density an d Specific Gravity (Relative Density) of Plastic

ASTM D790 Physical Dimensions of Solid Plastics Specimens ASTM D5947 (Method A) Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel ASTM C692 (Procedure B)

ASTM D790 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ASTM D2990 2017 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Cr

ASTM D790; ISO 178 Physical Properties Density/Specific Gravity ASTM D792, D297 Taber Abrasion ASTM D4060; MIL-A-8625 Corrosion/Environmental Testing Coating Evaluation ASTM D610, D714, D1654, D3359 Humidity ASTM D1

ASTM D790 Fogging GMW 3235; SAE J1756 Ashing ISO 1172 Gravelomete r SAE J400

ASTM D790 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials 3 Bestimmung der Festigkeitsparameter von Kunststoffen durch Schlagprüfung DIN EN ISO 179

ASTM D790 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer ASTM D1238 Standard Test Method for Density of Plastics by the Density-Gradient Technique ASTM D1505 Standard Test Method for Determina

ASTM D790 (deflection method) Tension Fatigue Peel Test ASTM D3479/D3479M EN-2243-2 Chemical Tests on Metals Elemental Analysis Aluminum and Aluminum alloys (Be, Bi, Ca, Cd, Cr, Cu, Fe, Ga, Li, Mg, Mn, Na, Ni, P, Pb, Sb, S

ASTM D790 Tensile Properties of Thin Plastic Sheeting ASTM D882 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tensions Loading (Metal-to-Metal) ASTM D1002 Climbing Drum Peel for Adhesives ASTM D1781

ASTM D790 Determining Dimensions of “Fiberglass” Pipe and Fittings ASTM D3567, ASTM D5813 (Section 8.1.2)

Test Description: Method(s): Non-active surgical implants – Mammary implants – Particular Requirements ISO 14607 Annex C1 and C2 Mechanical Contraceptives – Reusable Natural and Silicone Rubber Contracep

ASTM D790 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials ASTM G155 Standard Test Methods for Measuring Adhesion by Tape Test ASTM D3359 Standard Practice for general Techniques for Obta

ASTM D790 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending ASTM D6272 Standard Test Methods for Tension Testing of Metallic Materials ASTM E8 Compression Testing of

ASTM D790; UL 746A (Section 16); CAN/CSA C22.2 No.0.17 (Section 6.4); ISO 178; JIS K7171 Tensile Impact Test ASTM D1822; UL 746A (Section 14); CAN/CSA C22.2 No.0.17 (Section 6.9); ISO 8256; JIS K7160 Izod Impact Test ASTM D256; U

ASTM D790 ISO 178 MicroTensile Up to 6 750 lbf ASTM D1708 ASTM D4745 ASTM D4894 Density and Specific Gravity D.L. = 0.0001 g ASTM D792, Method A ISO 1183-1, Method A Plastic, Rubber, and Composites: Pressure, Temperature, Agin

ASTM D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ASTM D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (

ASTM D790; CAN/CSA C22.2 No.0.17 (Section 5.4); ISO 178; JIS K7171; UL 746A (Section 16) Tensile Impact Test ASTM D1822; JIS K7160; CAN/CSA C22.2 No.0.17 (Section 5.7); UL 746A (Section 14); ISO 8256

ASTM D790 - ISO 14125 (composites) - DIN 53435 (Dynstat) Shear strength ISO 14130 Compression test - ISO 604 (plastic) - ISO 14126 (composites) Compression set foams ISO 1856 Impact test (notched / un notched): - ISO 179 (Charp

ASTM D790, ASTM D2097, ASTM D4475, ASTM D4476, ASTM D6182; CFFA-10, CFFA-11; Ford FLTM BN 002-03, FLTM BN 102-02, FLTM BN 162-01; GM9216P (1993); Honda HES D6501; ISO 178, ISO 5402, ISO 14125; Jaguar Land Rover TPJLR.52.413;

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MODERN INDUSTRIES, INC 613 West 11th Street Erie, PA 16501 Abhijit Deokar Phone: 814 455 8061 Abhijitd@modernind.com MECHANICAL Valid To: April 30, 2026

ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D906 Standard test method for strength properties of adhesives in plywood type construction in she

ASTM D790 Non-Cellular Plastics and elastomers Density ISO 1183-1 Method A ASTM D792 Rigid Plastics, Polymers and composites Compression (Loads: 0.05N to 100kN) (Temperature range -50°C to + 250°C) ISO 604 ASTM D695

ASTM D790 Tensile Properties of Plastics (except Poisson’s Ratio) ASTM D638 Density and Specific Gravity (Relative Density) of Plastics by Displacement ASTM D792 (Method A) DSC ASTM D3418 FT-IR PTMP-7.2.1.2-P5 Melt Flow Rates of Th

ASTM D790 Fluorescent UV Exposure of Plastics ASTM D4329 Friction Properties ASTM D1894 (2023) Tensile Properties ASTM D638, except Modulus and A.3 Heat Deflection ASTM D648, Method A Impact Gardner Notched Unnotched

ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D905 Standard test method for strength properties of adhesive bonds in shear by compression loa

ASTM D790-17; ISO 178-19 Impact test- Plastics: Charpy Izod ISO 179-1 ASTM D256 Hardness of Metallic materials Brinell Hardness HBW 2.5/ 62Kg Rockwell B & C Micro Hardness: 100, 200, 300, 500, 100

ASTM D790 Tensile Properties of Polymer Matrix Composite Materials ASTM D3039 Compressive Properties of Polymer Matrix Composite Materials Using Combined Loading Compression (CLC) Fixture ASTM D6641 Flexural Properties of Polymer Matri

ISO 75-1 2020-02 ISO 75-2 2013-04 ASTM D 648-18 2018 ISO 178 2019-04 ASTM D 790-17 2017 ISO 179-1 2010-06 ISO 180 2019-11 ASTM D 256- 23e1 2023 ISO 306 2022-11 ISO 527-1 2019-07 ISO 527-2 2012-02 ASTM D 638-22 2022 ISO 1133-1 2022-06 ASTM D

ASTM D790, D6272; EN 2562 CMC Flexural ASTM C1161, C1341; GE: HSR/EPM D-003 Physical Properties / Specialty Test Fiber Volume / Void Content ASTM D3171 Conditioning (Composites) ASTM D5229/D5229M; SACMA SRM-11

ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Disp

ASTM D790 Standard Atmospheres for Conditioning and Testing ASTM D618 Tensile Properties of Plastics ASTM D638 Water Vapor Transmission ASTM E96/E96M Metallography: Banding/Orientation (Non-Dimensional) ASTM E1268 Ca

Test Typical Test Method(s)2 Dynamic Cornering Fatigue Testing SAE J267, SAE J328, SAE J1095 Noise Testing Frequency (10 Hz to 20 kHz) SAE J2521 Sound Pressure Level (50 to 150) dBA SAE J2521 Hardness Testing B

ASTM D790 ISO 178 Izod Im pact ASTM D256 ISO 180 (Method A) Melt Flow Rate ASTM D1238 (Method A) ISO 1133-1 S pecific Gravity ASTM D792 (Method A) ISO 1183-1 (Method A) Tensile Strength ASTM D638 (excluding Sec

Test Description/ Equipment Parameter Test Method(s): Linear Abrasion (Taber) (0.2 to 4.0) inch stroke length, (2 to 75) cycles/minute, 2100 gram max load GMW 14130; ISO 1518 Martindale Abrasion LP-463KC-04-03; ISO 12945-2 (pilli