ASTM E18 Accredited Testing Labs Worldwide

ASTM E18-24 GAT Vickers (Hv10) BS EN ISO 6507-1:2023 ASTM E92-23 GAT Vickers Micro / Low force (Hv0.3, 0.5 & Hv1.0) BS EN ISO 6507-1:2023 ASTM E384-22 GAT Impact: Charpy at -80°C to ambient temperature

ASTM E18 Salt Spray ASTM B117; ISO 9227 Torque Tension GMW 3044; ISO 16047; SAE/USCAR 10, 11

ASTM E18 Torque Wrenches 4– Snap Type Dial and Beam (5 to 50) ozf·in (20 to 200) ozf·in (5 to 50) lbf·in

ASTM E18 END

ASTM E18-25,-24 Standard Test Method for Security Glazing Materials And Systems ASTM F1233-21 Standard Test Method for Timed Evaluation of Forced-Entry- Resistant Systems ASTM F3038-21 Standard Practice for Abrasion Resistance of Printed

ASTM E18 Torque Wrenches 3 10 lbfꞏin to 250 lbfꞏft 0.92 % setting Torque transducers ________________________________________ 1 This laboratory offers commercial and on-site calibration service. 2 Calibration and

ASTM E18 ASTM E10 ASTM E384 ASTM E92 Impact – Charpy Method (300 ft.lbs / 406 J) ASTM E23 Tensile – Tension, Yield, Modulus and Elongation: n-Value r-Value Dynamic Fatigue Testing: Force Controlled Axial Fati

ASTM E18, ASTM F3125 Leeb Portable Hardness1 ASTM A956 Weld Operator and Weld Procedure Qualification API 1104; ASME Sect. IX; AWS B2.1/B2.1M, B4.0, D1.1/D1.1M, D1.2/D1.2M, D1.3/D1.3M, D17.1, D17.2/D17.2M, D1.5, ISO 9609-1, 9

ASTM E18-19, ASTM E18-20, ASTM E18-24, ASTM E18-25 - escluso/except par. 5.8 ASTM A370-05, ASTM A370-19e1, ASTM A370-20, ASTM A370-21, ASTM A370-22, ASTM A370-23, ASTM A370-24, ASTM A370-24a - solo/only par. 18 Durezza Vickers/Vickers har

ASTM E18-24 Durezza Vickers/Vickers hardness (HV0,1 - HV0,5 - HV1 - HV3 - HV5 - HV10 - HV30) UNI EN ISO 6507-1:2023 Durezza Vickers/Vickers hardness (HV0,1 - HV0,5 - HV1) Durezza Vickers/Vickers hardness (HV1 - HV3 - HV5 - HV10 - HV3

ASTM E18-24

ASTM E18 / Matériaux métalliques Essai de dureté Brinell Dureté HBW NF EN ISO 6506-1 ASTM E10 HBW : 2,5/187,5 2,5/62,5 Matériaux métalliques Essai de dureté Vickers Essais de dureté Vickers sous charge réduite Essai de microduret

ASTM E18

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 FASTENAL COMPANY LABORATORY - TAIWAN No. 63, Dade 2nd Rd. Gangshan District, Kaohsiung City, TAIWAN R.O.C. Brad Partington Phone: 507 453 8163 Scott Kuo Phone: 886 7 6

ASTM E18 Metallography Macroetching ASTM E381 Tensile Yield, Tensile, Reduction of Area, Elongation (Room temperature: 0 - 120,000 lb) ASTM A370, B557, E8/E8M Chemical Spark Atomic Emission Spectrometry – Steel, Stain

ASTM E18, A370 Microindentation (Knoop, Vickers) ASTM E384 (100g, 300g, 500g) Carburization/Decarburization via the Chord Method ARP 1820 Room Temp. Tensile (up to 40 000 lb) ASTM E8/E8M, A370, B557 Elevate

ASTM E18 Indirect Verification of Microindention Hardness Testers 3 (Vickers) 500g Force (100 to 240) HV (240 to 600) HV 11 HV 11 HV ASTM E92

ASTM E18; MPIF 43 Microhardness (Knoop & Vickers, (100, 200) g) ASTM B933, B934, E384; MPIF 51, MPIF 52 Metallography Microstructure Microetching Carbon Content MPIF STD 35 (PM Structural Parts only) ASTM E407 LS 0

ASTM E18

ASTM E18; TSM0501G [REV. 16], Sect. 9.9.1 Appearance AATCC Grayscale Color scale Macbeth Lightbooth ASTM D1729; FLTM BI 109-01; GMW15357; JIS L 0804; MIL-STD-883, Method 2009; TS371-00-004 [2017], Sect. 1 Colour

ASTM E18 Blocs de référence Machines de dureté VICKERS Vérification globale de la machine de dureté Méthode indirecte NF EN ISO 6507-2 ASTM E384 ASTM E92 Blocs de référence

ASTM E18 CON Vickers (HV5, 10 & 30) BS EN ISO 6507-1 ASTM E92 CON Vickers – Micro (HV0.2) BS EN ISO 6507-1 ASTM E384 CON Impact: Charpy at -196°C and -120°C to ambient temperature including % shear and l

ASTM E18-24 ASTM A1058-19 + ASTM E290-22 _ _ _ ASTM A1058-19 + ASTM E23-25 Pendolo di Charpy ASTM A1058-19 + ASTM E8/E8M-25 Trazione Leghe di nichel con presenza di cromo/Nickel-Rich chromium-bearing alloys, Leghe di Nichel/Nickel a

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 IMR TEST LABS - PORTLAND 5687-A SE International Way Portland, OR 97222 Juile Sheufelt Phone: (503) 653 2904 MECHANICAL Valid To: September 30, 2027 Certificate Numbe

ASTM E18 Vickers (HV5, 10) BS EN ISO 6507-1 ASTM E92 Tensile at ambient temperature (Forces up to 600 kN) BS EN ISO 6892-1 ASTM E8/E8 ASTM A370 ASTM B557 Impact testing: Charpy (-196°C and -123°C to Am

1 Determination of the hardness of metallic materials and plastics using indenters [Flex B] DIN EN ISO 6506 -1 2015-02 Metallic materials - Brinell hardness test - Part 1: Test method ASTM E 10 2018 Standard Test Method for

ASTM E18 Hardness Testers – Brinell HBW 10/3000 HBW 10/3000 HBW 10/1500 HBW 10/1000 HBW 5/750 HBW 10/500 HBW 10/250 HBW 2.5/187.5 HBW 2.5/62.5 (95 to 650) HBW (96 to 650) HBW (48 to 327) HBW

ASTM E18, E110 Indirect Verification of Brinell Hardness Testers3 500 kgf HBW 1500 kgf HBW 3000 kgf HBW 4.6 HBW 7.7 HBW 8.3 HBW Indirect verification method per ASTM E10 _____________________________________

ASTM E18, A370 (Section 18), F606/F606M; NASM-1312-6 Superficial Rockwell Hardness (HR15N, HR30N, HR45N, HR15TW, HR30TW, HR45TW, HR15WW) ASTM E18, A370 (Section 18); NASM-1312-6 Vickers (1 to 10) kgf ASTM E92, F606/F606M Char

ASTM E18, E140 Tensile, Yield, Elongation, n Value, r Value ASTM A370 (Sections 7-14), E8/E8M, E517, E646 Torque WI-023, -042, -046 Vibration High Temperature (1900° F (1037° C) Up to 180 CFM) Mechanical Cycling (Load Driven Up to

ASTM E18 Universal Testing Machine, Compression Testing Machines, Tension Testing Machines 3 (0.5 to 500) lbf (100 to 1000) lbf (200 to 2000) lbf (500 to 5000) lbf (1000 to 10 000) lbf (2500 to 25 000) lbf (5000 to

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 DICKSON TESTING COMPANY, INC. 11126 Palmer Avenue South Gate, CA 90280 Ronald Arevalo Phone: 562 862 8378 MECHANICAL Valid To: April 30, 2026 Certificate Number: 1772.02

ASTM E18 Hardness, Vickers (Scales HV0.2, HV0.5, HV1, HV5 and HV10) ASTM E92; ASTM E384; BS EN ISO 9015-1; ISO 6507-1 Impact, Charpy V-Notch (-321 to +212) °F ASTM A370, A923 (Method B), E23; BS EN ISO 9016; ISO 148-1 Nick –

ASTM E18, F606/F606M Salt Spray ASTM B117; ISO 9227 Single Shear Test (to 10 Tons) ASTM F606/F606M Tensile (to 10 Tons) Axial Only ASTM F606/F606M, E8/E8M Torsional Strength SAE J78, J81, J933, J1237

ASTM E18 ASTM E10 Macro Examination Macro Etch Tests for Weldments ASME BPVC Sec. IX; AWS D1.1; API 1104 Fillet Fracture Test (Weldment) ASME BPVC Sec. IX; AWS D1.1 Nick Break Test (Weldment) API 1104 Bend Test (Weldment) ASME BP

ASTM E18, F606/F606M; NASM 1312-6; ISO 6508, ISO 898-5 (6.1.3) Jominy Hardenability ASTM A255; SAE J406, ISO 642 Microhardness:

ASTM E18 Rockwell Hardness (Scales A, B, C, F, 15N, 30N, 15T, 30T) ASTM E92 ASTM E112 Vickers and Knoop Hardness of Metallic Materials Avera ge Grain Size (Comparison Procedure & Intercept Method) ASTM E290 Bend Testin g (except Gui

ASTM E18-25 ASTM E92-23 EN ISO 6507-1:2023, ISO 6507-1:2023, UNI EN ISO 6507-1:2023 ASTM E340-23 ASTM E562-19e1 _ _ _ _ _ _ _ _ Esame visivo Microscopia ottica ASTM E1268-19 _

ASTM E18 ASTM E110

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TITAN METALLURGY, L.L.C. 10400 Capital Avenue Oak Park, MI 48237 Steve Avery Phone: 248 543 3578 E-mail: testing@titanmetallurgy.com MECHANICAL Valid To: November

ASTM E18 Speed/RPM/Rate Simulation (6 to 200 000) rpm 0.003 % Agilent 33220A frequency synthesizer Durometer Calibration – (Type A, B, C, D, DO, O, OO) Indentor Extension & Shape Diameter Radius

ASTM E18 indirect verification method, Hardness test blocks Knoop & Vickers Hardness Testers 3 505 HV 1.0 500 HK 0.5 12 HV 17 HK Indirect verification per ASTM E384 / E92 using Knoop & Vickers Test Blocks Mass

ASTM E18 Indirect Verification of Microindentation Hardness Testing Machine3 – HV1 (1 kgf): Knoop/Vickers (100 to 240) HV1 (>240 to 600) HV1 >600 HV1 3.5 HV1 24 HV1 52 HV1 Ind

ASTM E18 Superficial (HR15N, HR30N, HR15T, HR30T) ASTM E18 Vickers (10 kgf) ASTM E92 Microhardness Vickers (200, 300, 500 and 1000) gf Knoop (200, 300, 500) gf ASTM E384; ISO 15614-1 Metallograph

ASTM E18 Vickers Hardness (HV5, HV10, HV30) ASTM E92

ASTM E18 Indirect Verification of Brinell Hardness Testers at Test Condition(s)3 – 10/500/15 10/3000/15 (50 to 70) HBW (80 to 101) HBW 239 HBW 349 HBW 416 HBW 2.5 HBW 3.7 HBW 8.4 HBW 13 HB

ASTM E18, ASTM A370 Coating Weight Aluminum on Steel Zinc on Steel ASTM A428/A428M ASTM A90/A90M, ASTM A917 (Section 8) Bend Test (Bend and Flatten) ASTM E290, ASTM A917 (Section 9) Surface Roughness using a Profilomet

ASTM E18, F606/F606M; EN 1043-1; EN 10109-1; EN ISO 6508; NASM 1312-6 Brinell (500, 1000, 1500 and 3000) kgf ASTM E10; DIN EN 10003-1; EN ISO 6506

ASTM E18 / Matériaux métalliques Essai de dureté Brinell Dureté HBW NF EN ISO 6506-1 – 2005 (Norme abrogée)* NF EN ISO 6506-1 ASTM E10 HBW 2,5/187,5 HBW 2,5/62,5 Matériaux métalliques Essai de dureté Vickers Dureté Vickers NF EN IS

ASTM E18 ____________________________________________ 1 This laboratory offers commercial calibration service and field calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertaint