FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates

ISO 11451 Accredited Testing Labs Worldwide

ISO 11451, all parts: Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Each lab card shows which parts it holds.

Parts of this series

29 accredited laboratories in 9 countries hold ISO 11451 in their ISO/IEC 17025 scope. Primary accreditors include Deutsche Akkreditierungsstelle, American Association for Laboratory Accreditation. In the register, ISO 11451 scope entries most often cover Emf, Surface Resistance in Vehicles, Water.

Total labs
29
Countries
9

Available in 9 Countries

Germany
17 labs
United States
4 labs
Italy
2 labs
Australia
1 lab
Japan
1 lab
Netherlands
1 lab
United Kingdom
1 lab
Canada
1 lab
Spain
1 lab

Top matrices for ISO 11451

Top analytes for ISO 11451

  • Emf (1)
  • Surface Resistance (1)

Sample labs

UL Japan
Ise-shi, Mie, JP
Holds: Part 2 · Part 4

ISO 11451-2 Harness Excitation Methods ISO 11451-4 Absorber Lined Chamber ISO 11452-2 Transverse Electromagnetic (TEM) Cell ISO 11452-3 Bulk Current Injection (BCI) ISO 11452-4 Electrical Loads ISO 16750-2 (Sections 4.6.3

TÜV Rheinland (Guangdong) Ltd. EMC-Lab
China, DE
Holds: Part 4

ISO 11451-4:2006* Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) Auto- motive ISO 11451-4:2013* Road vehicles - Vehicle test met

TÜV Technische Überwachung Hessen GmbH EMV-Labor
Kassel, DE
Holds: Part 1 · Part 2 · Part 4

ISO 11451-2:2015 Road vehicles —Vehicle test methods for electrical disturbances from narrowband radiated Electromagnetic energy — Part 2: Off-vehicle radiation sources EMV ISO 11451-4:2013 Road vehicles —Vehicle test methods for ele

TÜV Rheinland LGA Products
Nürnberg, DE
Holds: Part 2 · Part 4

ISO 11451-2 2015-06 Ed 4.0 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -Part 2: Off-Vehicle radiation sources ISO 11451-4 2013-04 Ed. 3.0 Road vehicles -- Veh

CSA Group Bayern
Plattling, DE
Holds: Part 1 · Part 2 · Part 3 · Part 4

ISO 11451-1:2015 Road vehicles —Vehicle test me thods for electrical disturbances from narrowband radiated Electromagnetic energy — Part 1: General principles and terminology EMV ISO 11451-2:2005 Road vehicles —Vehicle test me thods f

MeßTechnikNord GmbH EMV-Laboratorium
Wedel, DE
Holds: Part 1 · Part 2 · Part 4

ISO 11451 -1 2015-06 Straßenfahrzeuge - Fahrzeugprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 1: Allgemeines und Definitionen Fahrzeuge max. 2 Tonnen Gewicht und Länge max

Element Materials Technology Warwick
Warwick, GB
Holds: Part 1 · Part 2 · Part 4

ISO 11451-1:2005+A1:2008 Components / ESA ISO 11451-2:2005 ISO 11451-2:2015 ISO 11451-4:2013 (whole vehicle only at 2004/104/EC Annexes VI, IX Location A) 2005/83/EC EN50498:2010 72/245/EEC 97/24/EEC Chapter 8

COMPLIANCE ENGINEERING SERVICES
Keysborough, Victoria, AU
Holds: Part 2 · Part 3 · Part 4

ISO 11451-2; ISO 11451-3; ISO 11451-4 Components – Valves Monitor AS 4118.1.4 Environmental Surface Resistance Test IEC 60079-0 – Explosive Atmospheres – Section 26.13 – Surface resistance test of part of enclosures of

EMC Test NRW GmbH electromagnetic compatibility
Dortmund, DE
Holds: Part 1 · Part 2 · Part 3 · Part 4

ISO 11451-4:2013 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) EMV ISO 11451-4:2022 Road vehicles — Vehicle test methods fo

DEKRA Certification
ARNHEM, NL
Holds: Part 1 · Part 2 · Part 4

ISO 11451-1, ISO 11451-4, ISO 11452-1, ISO 11452-4 A. EMC. I.03 Electric and electronic equipment Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity 16.5 Hz – 3000 Hz EN/IEC 6

steep GmbH EMV-Zentrum
Bonn, DE
Holds: Part 3 · Part 4

ISO 11451-3:2015-06 Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation EMV ISO 11451-4:2013-04 Road vehicles - Electrical disturb

SGS Germany
Puchheim, DE
Holds: Part 2 · Part 4

ISO 11451-2:2015 Road vehicles-electrical distu rbances by narrow- band radiated electromagnetic energy - vehicle test methods, Part 2: Off-vehicle radiation source Testlevel II below 40 MHz Testlevel IV above 40 MHz EMV ISO 11451

TÜV SÜD Product Service GmbH PS-SL-EMC / PS-SL-ENV-STR
Straubing, DE
Holds: Part 2 · Part 4

ISO 11451 -2:2015 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 2: Off- vehicle radiation sources EMV ISO 11451 -4:2013 Road vehicles – Vehicle test methods f

EMCCons Dr. RASEK GmbH & Co. KG
Ebermannstadt, DE
Holds: Part 2 · Part 3 · Part 4

ISO 11451 -3:2015 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation EMV ISO 11451 -4:2013 Road vehicles — Vehicle test met

TUV Rheinland of North America
Pleasanton, CA, US
Holds: Part 2 · Part 4

ISO 11451-4; EN/IEC 12895; EN/IEC 13309; EN 12015; EN 12016; EN/ISO 13766; EN/ISO 14982; EN/IEC 55014-2; IEC/CISPR 14-2; KS C 9814-2:2020; SANS 214-2; EN 50121-1; EN 50121-2; EN 50121-3-1; EN 50121-3-2; EN 50121-4; EN/IEC 50155; EN 5

Spezial-EMV
St. Ingbert, DE
Holds: Part 2 · Part 4

ISO 11451-2:2015 Straßenfahrzeuge - Fahrzeugprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 2: Störstrahlungsquellen außerhalb des Fahrzeugs 20-2000 MHz Emax: 30 V/m EMV I

CEcert
Wismar, DE
Holds: Part 2 · Part 4

ISO 11451-4:2022 Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods EMC ISO 11452-2:2019 Road vehicles - Component test methods for el

Element Materials Technology Montréal
Boucherville, QC, CA
Holds: Part 2 · Part 4

ISO 11451-22 Bulk Current Injection (BCI) (excluding TWC method) ISO 11452-42; ISO 11451-42 Magnetic Field Immunity (excluding Helmholtz coil) ISO 11452-8 Electrical transient conduction along supply lines only ISO 763

SLG Prüf- und Zertifizierungs
Hartmannsdorf, DE
Holds: Part 2 · Part 3 · Part 4

ISO 11451 -2:2015 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods – Part 2: Off-vehicle radiation source EM C ISO 11451 -3:2015 Road vehicles - Electrical disturbances by n

Akkodis Germany EMC
Waiblingen, DE
Holds: Part 2 · Part 3 · Part 4

ISO 11451-3:2015 Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. On-board transmitter simulation Wa ☒ ANT 50W POW150W/<1GHz 350W/1-6GHz Mo ☒ ANT 50W POW 150W/<

Forschungs- und Transferzentrum e.V. an der Westsächsischen Hochschule Zwickau Prüflabor Automobilelektronik und Elektromagnetische Verträglichkeit
Zwickau, DE
Holds: Part 1 · Part 2 · Part 4

ISO 11451-1:2005-02+ Amd1:2008 Straßenfahrzeuge – Fahrzeugprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 1: Allgemeine Grundsätze und Terminologie AA EMV ISO 11451-1:2014-03

TUV Rheinland Italia
Pogliano Milanese, IT
Holds: Part 2 · Part 4

ISO 11451-4:1995, ISO 11451-4:2013, ISO 11451-4:2022 _ _