FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates

ISO 3377 Accredited Testing Labs Worldwide

ISO 3377, all parts: Leather - Determination of tearing load. Each lab card shows which parts it holds.

Parts of this series

27 accredited laboratories in 6 countries hold ISO 3377 in their ISO/IEC 17025 scope. Primary accreditors include Italian Accreditation Body, Deutsche Akkreditierungsstelle, United Kingdom Accreditation Service. In the register, ISO 3377 scope entries most often cover Aromatic Amines, Ph, Piombo Totale/Total Lead in Plastics, Metal, Textile.

Total labs
27
Countries
6

Available in 6 Countries

Italy
14 labs
Germany
8 labs
United Kingdom
4 labs
China
1 lab
France
1 lab
India
1 lab

Top matrices for ISO 3377

Plastics
2 labs
Metal
2 labs
Textile
2 labs
Building materials
1 lab
Water
1 lab
Drinking water
1 lab
Waste water
1 lab

Top analytes for ISO 3377

  • Aromatic Amines (4)
  • Ph (2)
  • Piombo Totale/Total Lead (2)
  • Breaking Strength (1)
  • Benzyl Butylphthalate (1)
  • Chlorophenols (1)
  • Cr(Vi) (1)
  • Ash Content (1)

Sample labs

Filter by partAny part (27)Part 1 (22)Part 2 (23)
ITS Testing Services (UK)
Lancashire, GB
Holds: Part 1 · Part 2

ISO 3377-2 :2016 Dynamic Water Penetration SATRA TM 230 :2017 LEATHER PhysicalTesting Flexing BS EN ISO 5402-1:2022 BS EN ISO 5402-1:2017 (withdrawn) Single edge tear Resistance BS EN ISO 3377-1:2011 C

Hohenstein India Pvt.
India, DE
Holds: Part 1 · Part 2

ISO 3377 -1 2012 -03 Leather – Physical and mechanical tests – Determination of tear load – Part 1: Single edge tear DIN EN ISO 3377 -2 2016 -07 Leather – Physical and mechanical tests – Determination of tear load – Part 2

White Lab srl - Labostudio
Santa Croce sull'Arno, IT
Holds: Part 1 · Part 2

ISO 3377-1:2012 Carico di strappo - Strappo su due bordi/Tear load-Double edge tear UNI EN ISO 3377-2:2016 Cromo esavalente (Cr VI) dopo invecchiamento/Hexavalent Chromium (Cr VI) after thermal pre-ageing (≥ 3 mg/kg) UNI EN ISO 10195:2

TÜV Rheinland LGA Products
Nürnberg, DE
Holds: Part 1 · Part 2

ISO 3377 -1 2012-03 Leder - Physikalische und mechanische Prüfungen - Bestimmung der Weiterreißfestigkeit - Teil 1: Einkantenriss K DIN EN ISO 3377 -2 2016-07 Leder - Physikalische und mechanische Prüfungen - Bestimmung der Weite

Hohenstein Laboratories (HK)
China, DE
Holds: Part 1

ISO 3377 -1 2012-03 Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) DIN EN ISO 4674 -1 2017-03 Rubber - or plastics -coated fabrics - Determination of tear resistan

Bureau Veritas Consumer Products Services Germany
Schwerin, DE
Holds: Part 1 · Part 2

ISO 3377 -1 2012 -03 Leder – Physikalische und mechanische Prüfungen – Bestimmung der Weiterreißfestigkeit – Teil 1: Einkantenriss DIN EN ISO 3377 -2 2016 -07 Leder – Physikalische und mechanische Prüfungen - Bestimmung der Weiter

CE.R.I.S.
Solofra, IT
Holds: Part 1 · Part 2

ISO 3377-1:2012 Carico di strappo - Strappo su due bordi/Tear load-Double edge tear UNI EN ISO 3377-2:2016 Cromo esavalente (Cr VI)/Hexavalent Chromium (Cr VI) Metanale (Formaldeide)/Methanal (Formaldehyde) pH/pH UNI EN ISO 17075-2:20

Prüf- und Forschungsinstitut Pirmasens e.V.
Pirmasens, DE
Holds: Part 1 · Part 2

ISO 3377 -1 2012-03 Leather – Physical and mechanical tests – Determination of tear load – Part 1: Single edge tear DIN EN ISO 3377 -2 2016-07 Leather – Physical and mechanical tests – Part 2: Determination of double edge te

DEKRA Testing and Certification
Stuttgart, DE
Holds: Part 1

ISO 3377 -1 2002-12 Leder - Physikalische und mechanische Prüfungen - Teil 1: Bestimmung der Weiterreißfestigkeit - Einkantenriss Essen EN ISO 3759 2011-05 Textilien - Vorbereitung, Markierung und Messung von Messproben aus Fläch

SATRA Technology Centre
Northamptonshire, GB
Holds: Part 1

ISO 3377-1:2011 EN ISO 4674-1:2016 Mtd. B UK Restraint EN 17092-1:2020 UK Risk Category Zoning EN 17092-1:2020 UK Fit & Ergonomics EN 17092-1:2020 UK

Hohenstein Laboratories GmbH & Co. KG
Bönnigheim, DE
Holds: Part 1

ISO 3377-1 2012-03 Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (EN ISO 3377-1:2011) DIN EN ISO 3759 2011-08 Textiles - Preparation, marking and measuring of fabric specimens

Comolab di Qualità e Logistica
Lurate Caccivio, IT
Holds: Part 1 · Part 2

ISO 3377-1:2012 _ Indumenti di protezione contro il calore e le fiamme/Protective clothing against heat and flame Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Deformazione allo scoppio/Bursting dist

CERTOTTICA S.C.R.L.
Longarone, IT
Holds: Part 1 · Part 2

CERTOTTICA S.C.R.L. Zona Industriale Villanova 32013 Longarone BL Allegato al certificato di accreditamento n. 01189 rev. 5 del 23/01/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 21 Sede A Data: 17/09/2025 pag. 17 di 19 Test d

CTC ARS TINCTORIA Srl a socio unico
Santa Croce sull'Arno, IT
Holds: Part 1 · Part 2

ISO 3377-1:2011, UNI EN ISO 3377-1:2012 ISO 3377-2:2016, UNI EN ISO 3377-2:2016 ISO 23702-1:2023, UNI EN ISO 23702-1:2024 Dinamometria Dinamometria LC-MS/MS ISO 10195:2018 + ISO 17075-2:2017, UNI EN ISO 10195:2022 + UNI EN ISO 17075-2

Deutsches Referenzburo fur Ringversuche und Referenzmaterialien GmbH (DRRR GmbH)
Kempten, DE
Holds: Part 1 · Part 2

ISO 3377-1, Tear load – double edge tear ISO 3377-2 Building materials At least once a year Compressive strength Flexural strength Hardened concrete- Compressive strength EN 12390-3, Hardened concrete - Flexural strength EN 1

BRACHI TESTING SERVICES
Prato, IT
Holds: Part 1 · Part 2

ISO 3377-1:2011, UNI EN ISO 3377-1:2012 Carico di strappo - Strappo su due bordi/Tear load-Double edge tear QB/T 2711:2005 Carico di strappo - Strappo su due bordi/Tear load-Double edge tear ISO 3377-2:2016, UNI EN ISO 3377-2:2016 GC-M

RICOTEST
Pastrengo, IT
Holds: Part 1 · Part 2

RICOTEST S.r.l. Via Tione 9 37010 Pastrengo VR Allegato al certificato di accreditamento n. 00763 rev. 6 del 17/09/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 25 Sede A Data: 17/09/2025 pag. 7 di 10 Resistenza al taglio da la

ANALYTICAL
Arzignano, IT
Holds: Part 1 · Part 2

ISO 3377-1:2012 Carico di strappo - Strappo su due bordi/Tear load-Double edge tear UNI EN ISO 3377-2:2016 _ _ Dinamometria Dinamometria Cromo esavalente (Cr VI) dopo invecchiamento/Hexavalent Chromium (Cr VI) after thermal pre-agein

CENTRO TESSILE COTONIERO E ABBIGLIAMENTO
Busto Arsizio, IT
Holds: Part 1 · Part 2

ISO 3377-1:2012, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 UNI EN ISO 11612:2015 par 6.5.1.2 + UNI EN ISO 3376:2020, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 _ _ Indumenti di protezio

CTC
LYON, FR
Holds: Part 1 · Part 2

ISO 3377-1 EN ISO 4674-1 / méthode B Marquage des zones de catégorie de risque Positionnement de points de référence et traçage EN 17092-1 Localisation et fixation des protecteurs contre les chocs Portée et observation visuelle Ré

TEKNOCHIM
Monte San Giusto, IT
Holds: Part 1 · Part 2

ISO 3377-1:2011, ISO 3377-1:2011, UNI EN ISO 3377-1:2012 EN ISO 3377-2:2016, ISO 3377-2:2016, UNI EN ISO 3377-2:2016 Dinamometria Dinamometria Cromo esavalente (Cr VI) dopo invecchiamento/Hexavalent Chromium (Cr VI) after thermal pre-ag

Bureau Veritas Certest
Ponte a Egola - San Miniato, IT
Holds: Part 1 · Part 2

ISO 3377-1:2011, UNI EN ISO 3377-1:2012 EN ISO 3377-2:2016, ISO 3377-2:2016, QB/T 2711:2005, SASO ISO 3377-2:2018, UNI EN ISO 3377-2:2016 Dinamometria Dinamometria ISO 23702-1:2023, UNI EN ISO 23702-1:2024 LC-MS/MS ISO 10195:2018 + IS