ASTM D4060 Accredited Testing Labs Worldwide

ASTM D4060; ASTM B1023; FED-STD-141 (Method 6192.1) Wet Tape Adhesion ASTM D3359; FED-STD-141 (Method 6301.3); MIL-DTL-5541; MIL-PRF-23377; ASTM D823 (Method D)

ASTM D4060; ASTM D3884; HES D6506 [REV.5], Section 5.10; LP-463KB-21-01; NES M0141, Sect. 6.2.8, Method 4; SAE J948; SAE J1530; TSL5100G [REV.8], Sect. 4.12; TSM0502G [REV. 14], Sect. 4.6.4; FLTM BN 107-01; FLTM BN 108-10; FLTM

ASTM D4060; ASTM G195; Ford BN 108-02; Ford BN 108-04; GMW3208; Honda HES D6501 3.32, Method A; SAE J365; SAE J948, Procedure 3; SAE J1847 Accelerated Weathering Fluorescent UV Condensation QUV UVCON ASTM D4587; ASTM G154; N

ASTM D4060; MIL-A-8625 Corrosion/Environmental Testing Coating Evaluation ASTM D610, D714, D1654, D3359 Humidity ASTM D1735, D4585/D4585M Salt Spray (Fog) ASTM B117 UV (Xenon, Fluorescent) ASTM G151, G154, G155

ASTM D4060 Adhesion by Knife ASTM D6677; BS EN 10289, Annex D; BS EN 10290, Annex D; BS EN 10268, Annex G; ISO 21809-3, Annex Q Pull-Off Adhesion ASTM D4541 Method D; API RP 5L7 Appendix 9; ISO 4624 Method B Adhesion by Tape Test A

ASTM D4060 Abrasion Resistance of Organic Coatings by the Taber Abraser Epoxy Grouts ASTM C307 Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic surfacing ASTM C531 Linear Shrinkage and Coefficient of Thermal Exp

ASTM D4060; GM4350M (superseded 2013) 2; SAE J365, J948 Chemical Resistance RTCA/DO-160 C/D/E/F/G/H, Section 11; MIL-STD-810 C/D/E/F/G/H, Method 504; HES D6501-03 C Rev.2, HES D2016; FREIGHTLINER 49-00023; AS

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 MICHIGAN TESTING INSTITUTE, INC. 44249 Phoenix Drive Sterling Heights, MI 48314 Melody Wostyn Phone: 586 731 2230 MECHANICAL Valid To: August 31, 2027 Certificate Number: 041

ASTM D4060 Coating Flexibility of Prepainted Sheet ASTM D4145 High-Pressure Decorative Laminates – Light Resistance NEMA LD-3 Section 3.3 Standard Test Method for Rubber Property - Durometer Hardness ASTM D2240 (Shore A and Shore D Hard

ASTM D4060 Hexavalent Chromium Analysis ASTM D6492; Aptiv DX900359; GMW3034; ISO 3613

ASTM D4060-25 UNI EN ISO 3251:2019 Tecnica di prova O&I Metodo Taber Gravimetria Pitture e vernici su substrato metallico/Paints and varnishes on metallic substrate Denominazione della prova / Campi di prova Metodo di prova Tecnica

1.1.7 Abriebprüfungen *** DIN ISO 4649 2021-06 Elastomere oder thermoplastische Elastomere - Bestimmung des Ab - riebwiderstandes mit einem Gerät mit rotierender Zylindertrommel DIN ISO 9352 2018-08 Kunststoffe - Bestimmung de

ASTM D4060 ASTM D4065 Standard Test Method for Abrasion Resistance of Organic Coating by the Taber Abraser Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Re port of Procedures ASTM D4255 In-Plane S

ASTM D4060

ASTM D4060, ASTM G195; CFFA-1 b, CFFA-200 b; Chrysler LP-463KB-21-01; Ford FLTM BN 108-02; GM9337P (1998), GM9515P (1988); GMW3208; Honda HES D6506, HES D6507; ISO 5470-1; SAE J948, SAE J1530, SAE J1847, SAE Z26.1

ASTM D4060 Adhesion ASTM B571 (excluding Draw, File, Impact, Peel, and Push methods); ASTM D3359; FED-STD-141; MIL-C-83488; SAE J207 Coating Thickness – Microscopic Method ASTM B487 Coating Weight MIL-A-8625 Porosity AMS 2460 Spe

ASTM D4060; ASTM D3884; Chrysler LP-463KB-21-01; FLTM BN 107-01; FLTM BN 108-02; GM 9515P; GM 9905P; GMW3208; ISO 9352 (1995); SAE J575; PV 3906; PV 3366; PV 3949; DBL 5578 (Section 8.1), 88100002 Acid Spotting FLTM BI 113-02, BI

ASTM D4060; Ford FLTM BN 108-02; Ford FLTM BN 108-04; Honda HES D6501 (3.32.1, Method A); MIL-P-18493 (4.3.3.4); MIL-STD-13231 (5.11.1a) Acid Resistance ASTM D1308; Honda 5100Z-SE0-0000 (6-14); Honda 5100Z-SG0-A000 (6

ASTM D4060 -25 2025 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser DIN 53754 1977-06 Testing of plastics – determination of abrasion, abrasive disk method DIN EN ISO 7784 -2 2023-05

ASTM D4060 Visual and Macroscopic Evaluation of Welds ISO 5817 (excluded: beam welds); AWS D1.2 (Sections 3.6, 3.7, 3.8, 5.14, 5.2, 6.4, and 6.4.5.5); CSA-W47.1 (Sections 9.9, 9.10, 9.11, 9.14, 11.6, 11.7); AWS D1.1 Determination an

ASTM D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser ASTM D4068 Standard specification for chlorinated polyethylene (CPE) sheeting for concealed water-containment membrane (annex A2 only)

ASTM D4060 Compressive Properties of Rigid Plastics ASTM D695 Durometer Hardness (Shore A, Shore D, Shore OO) ASTM D2240 Flexural Properties of Plastics ASTM D790 Standard Atmospheres for Conditioning and Testing ASTM D6

ASTM D4060; MIL-PRF-8625; Abrasion Resistance of Hard Anodic Coatings by Taber Abrasion ASTM B1023 Wet Tape Adhesion MIL-PRF-8625, MIL-DTL-5541; FED-STD-141 Coating Weight on Anodically Coated Aluminum MIL-PRF-8625, MIL-DTL-5541;