FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates

ISO 4892 Accredited Testing Labs Worldwide

ISO 4892, all parts: Plastics - Methods of exposure to laboratory light sources. Each lab card shows which parts it holds.

Parts of this series

69 accredited laboratories in 12 countries hold ISO 4892 in their ISO/IEC 17025 scope. Primary accreditors include Deutsche Akkreditierungsstelle, American Association for Laboratory Accreditation, Italian Accreditation Body. In the register, ISO 4892 scope entries most often cover Ash Content, Ball Indentation Hardness, Color Difference in Plastics, Textile, Drinking water.

Total labs
69
Countries
12
Top matrix
Plastics
17 labs

Available in 12 Countries

Germany
39 labs
United States
11 labs
Italy
5 labs
United Kingdom
4 labs
Japan
2 labs
Canada
2 labs
Poland
2 labs
China
1 lab
Qatar
1 lab
Sweden
1 lab
Taiwan
1 lab
Australia
1 lab

Top matrices for ISO 4892

Plastics
17 labs
Textile
6 labs
Drinking water
3 labs
Wood
2 labs
Water
2 labs
Surface swabs
1 lab
Metal
1 lab
Technical products
1 lab

Top analytes for ISO 4892

  • Ash Content (1)
  • Ball Indentation Hardness (1)
  • Color Difference (1)
  • Compressive Strength (1)
  • Iron (1)
  • Ozone (1)
  • Pencil Hardness (1)
  • Pull-Off Strength (1)

Sample labs

Filter by partAny part (69)Part 1 (15)Part 2 (52)Part 3 (34)Part 4 (2)
BICS Laboratories Ltd
Brighouse, GB
Holds: Part 3

ISO 4892-3:2024 Bitumen, plastic and rubber sheets for roof waterproofing – determination of water tightness BS EN 1928: 2000 Method A END

Shirley Technologies Limited Trading as BTTG
West Yorkshire, GB
Holds: Part 3

ISO 4892-3:2016 Austin & Sagar

QIMA Testing (Germany)
Hamburg, DE
Holds: Part 1 · Part 3

ISO 4892-1: 2016-10 EN ISO 4892-1:2016 ISO 4892-1:2016 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 1: Allgemeine Anleitung Plastics - Methods of exposure to laboratory light sources - Part 1: General guida

Polytest Ingenieure
Fürth, DE
Holds: Part 3

ISO 4892 -3 2016 -10 Kunststoffe – Künstliches Bestra hlen oder Bewittern in Geräten – Teil 3: UV-Leuchtstofflampen DIN EN ISO 6892 -1 2017 -02 Metallische Werkstoffe – Zugversuch – Teil 1: Prüfverfahren bei Raumtemperatur

Touchstone Systems & Services
Wyoming, MI, US
Holds: Part 3

ISO 4892-3; SAE J2412

Kiwa GmbH
Berlin, DE
Holds: Part 2 · Part 3

ISO 4892-3 Kunststoffe — Künstliches Bestrahlen oder Bewittern in Geräten —Teil 3: 2014-02 UV-Leuchtstofflampen DIN EN ISO 9073-4 Textilien — Prüfverfahren für Vliesstoffe —Teil 4: Bestimmung der 1997-09 Weiterreißfestigkeit DIN EN ISO 1133

Atlas Material Testing Technology
Linsengericht, DE
Holds: Part 1 · Part 3

DIN (Deutsches Institut für Normung) (cont) DIN 75220 Aging of Automotive Components in Solar Simulation Units DIN EN 60068-25 Environmental Effects – Part 2-5: Test Methods – Test Sa: Simulate Solar Radiation at Ground Level and

Entwicklungs- und Prüflabor Holztechnologie
Dresden, DE
Holds: Part 2 · Part 3

ISO 4892 -2 2013-06 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon -arc lamps DIN EN ISO 4892 -3 2016-10 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps DIN

RISE Research Institutes of Sweden
Järfälla, SE
Holds: Part 2 · Part 3

ISO 4892-2 Färg och lack Ja 2 Nej SS-EN ISO 4892-3 Polymera material Ja 2 Nej Excluding table 5 and annex C Korrosionsprovning Korrosionsprovning ASTM G85 Metalliska material Ja 2 Nej Only annex A3 IEC 60068-2-42 Metalliska material Ja 2 N

Q-Lab Test Services, Deutschland
66115 Saarbrucken,, DE
Holds: Part 1 · Part 2 · Part 3

ISO 4892-2 Plastics- Methods of Exposure to Laboratory Light Sources; Xenon arc Sources ASTM G155 Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials LABORATORY ACCELERATED WEATHERING: TESTING WITH FLUORESCENT U

Materialprüfanstalt für das Bauwesen (MPA BS) Fachbereich 1 - Konstruktionen und Baustoffe Fachbereich 2 - Brandschutz
Braunschweig, DE
Holds: Part 3

ISO 4892 -3 2016-10 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps DIN EN ISO 7390 2004-04 Building construction - Jointing products - Determination of resistance to flow of seala

Institut für Lackprüfung Andreas Keiner
Wettenberg, DE
Holds: Part 2 · Part 3

ISO 4892 -2 2013 -06 Kunststoffe – Künstliches Bestrahlen oder Bewittern in Geräten – Teil 2: Xenonbogenlampen DIN EN ISO 16474 -3 2014 -03 Beschichtungsstoffe – Künstliches Bestrahlen oder Bewittern in Geräten – Teil 3: UV-F

MATED s.r.l.
Trento, IT
Holds: Part 2 · Part 3

ISO 4892-2:2021 + UNI EN ISO 4628-2:2016, UNI EN ISO 4892-2:2021 + UNI EN ISO 4628-3:2025, UNI EN ISO 4892-2:2021 + UNI EN ISO 4628-4:2016, UNI EN ISO 4892-2:2021 + UNI EN ISO 4628-5:2023 UNI EN ISO 4892-3:2025 + UNI EN ISO 4628-2:2016,

SKZ - Testing
Würzburg, DE
Holds: Part 2 · Part 3

ISO 4892 -2 2021-11 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 2: Xenonbogenlampen DIN EN ISO 4892 -3 2016-10 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 3: UV-Leuchtstofflam

Intertek Consumer Goods
Fürth, DE
Holds: Part 3

ISO 4892 -3:2016-10 Kunststoffe-Künstliches Bestrahlen oder Bewittern in Geräten – Teil 3: UV-Leuchtstofflampen

QIMA Certification (Germany)
Hamburg, DE
Holds: Part 1 · Part 3

ISO 4892-1: 2016-10 EN ISO 4892-1:2016 ISO 4892-1:2016 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 1: Allgemeine Anleitung Plastics - Methods of exposure to laboratory light sources - Part 1: General guida

NonaChem
Ladenburg, DE
Holds: Part 2 · Part 3

ISO 4892 -2 DIN EN ISO 4892 -3 Climate assessment Coating materials, parts, components, semi-finished products, plastics, metals Temperature DIN EN 60068 -2-1 DIN EN 60068 -2-2 DIN EN 60068 -2-14 Coating materials, parts, com

Element Materials Technology Portland
Hillsboro, OR, US
Holds: Part 2 · Part 3

ISO 4892-3; SAE J2020 Xenon Weathering Test MIL-STD-810 E, F, G, H Method 505; ISO 4892-2; SAE J1885 Protection Against Solid Foreign Objects IEC 60529 Sec. IP 1X, IP 2X, IP 3X, IP 4X, IP 5X, IP 6X Fluid Susceptibility RTCA

COMPLIANCE ENGINEERING SERVICES
Keysborough, Victoria, AU
Holds: Part 2 · Part 3

ISO 4892-2:2016; EN ISO 4892-3:2016; AS 60068.2.5 Environmental Testing - Tests – Test Sa- Simulated Solar Radiation at Ground Level; MIL-STD-810G – Method 505.6 (Solar Radiation Sunshine); AECTP-300-3 Method 305 Flammabili

Deutsches Referenzburo fur Ringversuche und Referenzmaterialien GmbH (DRRR GmbH)
Kempten, DE
Holds: Part 3

ISO 4892 - ASTM G155 Sunlight simulation DIN 75220 Exposure to light – UV lamps - ISO 4892-3 - ASTM G154 Environmental stress cracking DIN EN 14576/ ASTM D5397 Environmental cycle test PV 1200 Aluminum wheels, refere

Doha Technical
Mesaieed, QA
Holds: Part 3

ISO 4892-3 Test Method for Determination of Flash Point by Abel Closed-Up ISO 13736 Moisture Content of Solid Glass Beads Use in Road Marking SOP: DTL/PR/RM/029 Standard Test Method to Determine the Drying Time of Thermoplastic Striping

Labor Lehmacher - Schneider GmbH & Co. KG
Osnabrück, DE
Holds: Part 2 · Part 3

ISO 4892 -2 2013-06 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 2: Xenonbogenlampen DIN EN ISO 4892 -3 2016-10 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 3: UV-Leuchtstofflam

National Exposure Testing
Sylvania, OH, US
Holds: Part 3

ISO 4892-3; ISO 11507 (Method A); NES M0007 (Section 48 UV Method); SAE J2020 Filiform ASTM D2803 (Procedures A-C); HES D6501 (Section 3.16.1); IEC 60068-2-52; NES M0007 Section 35; Subaru TS312-01-051 Rating and Evaluation

Polymer Service GmbH Merseburg Mechanische Prüfung von Kunststoffen - MPK
Merseburg, DE
Holds: Part 2 · Part 3

ISO 4892 -2 2021-11 Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps DIN EN ISO 4892 -3 2025-04 Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps 4.

J.S. Hamilton Poland
Gdynia, PL
Holds: Part 1 · Part 2 · Part 3

ISO 4892-1:2016-06 PN-EN ISO 4892-2:2013-06 PN-EN ISO 4892-2:2013-06/A1:2022- 01 PN-EN ISO 16474-1:2014-02 PN-EN ISO 16474-2:2014-02 PN-EN ISO 16474-2:2014-02/A1:2023- 02 PV 3929:2018-03 PV 3930:2017-11 SAE J2527:2004-02 Odporność

Intertek Testing Services NA
Kentwood, MI, US
Holds: Part 1 · Part 2 · Part 3

ISO 4892-3; ASTM D4329; ABYC H-31; ABYC S-31 Salt Spray/Humidity/CASS ASTM B117; ASTM B368; ASTM D1735; ASTM D2247; Chrysler LP-463PB-9-01; Chrysler LP-463PB-10-01; FLTM BI 103-01; FLTM EU BQ-005-02; GM 4298P, 4465P; SAE J575, J138

Sächsisches Textilforschungsinstitut e. V. Prüfstelle
Chemnitz, DE
Holds: Part 3

ISO 4892-3 Kunststoffe — Künstliches Bestrahlen oder Bewittern in Geräten —Teil 2016-10 3: UV-Leuchtstofflampen DIN EN 12224 2000-11 DIN EN 12225 2021-01 Geotextilien und geotextilverwandte Produkte — Bestimmung der Witterungsbeständigkeit

TÜV SÜD Industrie Service GmbH
München, DE
Holds: Part 2 · Part 3

ISO 4892 -2 2021 -11 Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps Mü DIN EN ISO 4892 -3 2016 -10 Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV

CSI SpA
Bollate, IT
Holds: Part 2 · Part 3

ISO 4892-3:2016 + ISO 4582:2017 + ISO 2813:2014 Gravimetria Esame visivo Comportamento al fuoco per mezzo dell'indice di ossigeno - prove a temperatura ambiente/Burning behaviour by oxigen index - Ambient-temperature test ISO 4589-2:201

iLF Magdeburg
Magdeburg, DE
Holds: Part 2 · Part 3

ISO 4892 -3 2016-10 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps DIN EN ISO 16474 -3 2021-04 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescen

AUCOTEAM
Berlin, DE
Holds: Part 3

ISO 4892 -3 2016-10 Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 3: UV-Leuchtstofflampen Verwendete Abkürzungen: DIN Deutsches Institut für Normung e.V. EN Europäische Norm IEC International Electrotech

Accelerated Weathering
Wiltshire, GB
Holds: Part 2 · Part 3

ISO 4892-2:2013/ Amd 1:2021 BS EN ISO 4892-3:2016) BS EN ISO 16474-3:2021 PAINTS & VARNISHES Protective paint systems for offshore and related structures – 24-hour steady state low temperature testing at -20ºC Max chamber size:

IFO Institut für Oberflächentechnik
Schwäbisch Gmünd, DE
Holds: Part 2 · Part 3

ISO 4892 -3 2016-10 Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps DIN EN ISO 16474 -2 2022-11 Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-a

Atlas Weathering Services Group
Miami, FL, US
Holds: Part 2 · Part 3 · Part 4

ISO 4892-2 Exposure to Laboratory Light Sources – Xenon-arc Lamps ISO 4892-3 Exposure to Laboratory Light Sources – Fluorescent UV Lamps ISO 4892-4 Exposure to Laboratory Light Sources – Open Flame carbon-arc Lamps I