ASTM D1238 Accredited Testing Labs Worldwide
24 accredited laboratories in 5 countries hold ASTM D1238 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle. In the register, ASTM D1238 scope entries most often cover Ball Indentation Hardness, Density / Specific Gravity, Izod Pendulum Impact Resistance in Plastics, Drinking water.
Available in 5 Countries
Top matrices for ASTM D1238
Top analytes for ASTM D1238
- Ball Indentation Hardness (1)
- Density / Specific Gravity (1)
- Izod Pendulum Impact Resistance (1)
- Melt Flow Rates (1)
- Melt Mass-Flow Rate (1)
- Moisture Content (1)
- Notch Depth (1)
- Schmelze-Massefließrate (Mfr) (1)
Sample labs
ASTM D1238 2013 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Pastometer ISO 1133 -1 2011-12 Kunststoffe ‒ Bestimmung der Schmelze-Massefließrate (MFR) und der Schmelze-Volumenfließrate (MVR) von Thermo
ASTM D1238, Procedure A; TSM0501G [REV. 16], Sect. 9.10 Coefficient of Friction HES D6506 [REV.5], Section 5.23; TSL5100G [REV.8], Sect. 4.36 Tension/Compression ASTM D1056; ASTM D3574, Test B, C, & D; ASTM D3575, Suffix B, D,
ASTM D1238 Insulation resistivity GB/T 1692 Xenon-Arc Sources Test SAE J2412; SAE J2527; GB/T 16422.2; ISO 4892-2
ASTM D1238; ISO 1133-1 Color Measurement by Data Color, CIE, XYZ, L-A-B, and Transmittance ASTM D2244 Ash Content in Thermoplastics ASTM D5630 (Procedure B); ISO 3451-1 (Method A) .
ASTM D1238 Standard Test Method for Density of Plastics by the Density-Gradient Technique ASTM D1505 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading ASTM D2412
ASTM D1238 at 0 °C to 400 °C Temp, (0 to 20) kg force, and (0 to 2) in length. 7 This laboratory meets R205 – Specific Requirements: Calibration Laboratory Accreditation Program for the types of dimensional tests listed above and is con
ASTM D1238; ISO 1133 Mildew Growth FORD WSS-M5H34-A (3.12), WSS-M99P32-C (3.7); GM 9128P (Inactive 4/11); GMW 3259
DIN EN ISO 1133 -2 2012-03 Kunststoffe ‒ Bestimmung der Schmelze -Massefließrate (MFR) und der Schmelze -Volumenfließrate (MVR) von Thermoplasten ‒ Teil 2: Verfahren für Materialien, die empfindlich gegen eine zeit- bzw. temperaturabh
ASTM D1238 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure ASTM D1598 Test Method for Short-Term Hydraulic Failure Pressure of Plastic Pipe, Tubing and Fittings ASTM D1599 Specification for
ASTM D1238-23a Indice di fluidità in massa (MFR)/Melt mass-flow rate (MFR), Indice di fluidità in volume (MVR)/Melt volume-flow rate (MVR) UNI EN ISO 1133-1:2022 _ _ _ Infiammabilità/Flammability Massa volumica/Specific Gravity ASTM
DIN EN ISO 1628 -1 2021-06 Kunststoffe - Bestimmung der Viskosität von Polymeren in verdünnter Lösung durch ein Kapillarviskosimeter - Teil 1: Allgemeine Grundlagen DIN EN ISO 1628 -2 2020-12 Kunststoffe - Bestimmung der Viskosit
ASTM D1238, Procedure B; ISO 1133-1, Procedure B Tensile Properties ASTM D638; ISO 527-1, ISO 527-2 Flexural Properties ASTM D790; ISO 178 Charpy Impact Properties ISO 179-1 (Specimen Type I, Notch Type A & Unnotched) Izod Impact P
ASTM D1238 Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer (Method A) ASTM D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1238 Viscosity number ISO 307 sulfuric acid - m-cresol - formic acid, Viscosity number of PBT ISO 1628-5, Fluidity – capillary rheometer ISO 11443, Parallel plate rheometer ISO 6721-10 Rubber At least once a year Mooney Viscos
ASTM D1238, ASTM D3364; Ford FLTM BO 021-01; ISO 1133, ISO 4440 Moisture Content ASTM D6869; Ford FLTM BI 102-01, FLTM BI 120-08, FLTM BO 024-02; GMW14777; ISO 960 (Method A), ISO 15512 (Method B1); SAE J315 Moisture Vapor Trans
ASTM D1238 (Method A); ISO 1133 Migration Staining Chrysler LP-463DD-6-01; GM 9141P; GMW14141 Moisture Absorption WSS-M99P32-B (Section 3.7) Odor GM 9130P; GM 9832P; SAE J1351; FLTM BO131 03; GMW3205; TSM 0505G (All Classes); H
ASTM D1238 (Procedure A) Ash Testing by Muffle Furnace ASTM D5630 Durometer Hardness ASTM D2240 (Shore A and D) Surface Resistivity ASTM D257
ASTM D1238 Tear Resistance ASTM D1004 Trouser Tear ASTM D1938
ASTM D1238(Method A), ISO 1133(Procedure A) Failure Analysis Using test methods listed above in accordance with the ASM Handbook Volume 11 and Volume 11B 1 The Consumer Product Safety Improvement Act (CPSI A) requires that
ISO 75-1 2020-02 ISO 75-2 2013-04 ASTM D 648-18 2018 ISO 178 2019-04 ASTM D 790-17 2017 ISO 179-1 2010-06 ISO 180 2019-11 ASTM D 256- 23e1 2023 ISO 306 2022-11 ISO 527-1 2019-07 ISO 527-2 2012-02 ASTM D 638-22 2022 ISO 1133-1 2022-06 ASTM D
ASTM D1238 (Method A) Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography ASTM D5296 Standard Test Method for Oxidative-Induction Ti
ASTM D1238, Procedure A Melt Flow Index ASTM D2244 Color and Color Difference ASTM D5630, Method B Inorganic Ash Levels ASTM D6980 Moisture Analysis
ASTM D1238 using: PRT, Hart 1502 Bore gage/setting ring
ASTM D1238 (Method A) ISO 1133-1 S pecific Gravity ASTM D792 (Method A) ISO 1183-1 (Method A) Tensile Strength ASTM D638 (excluding Sections 11.3, 11.4 and 11.5) ISO 527-1 (excluding Sections 9.5, 10.2, 10.3 and 10.4),