ASTM D1525 Accredited Testing Labs Worldwide

12 accredited laboratories in 5 countries hold ASTM D1525 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D1525 scope entries most often cover Ball Indentation Hardness, Density, Fogging in Plastics, Drinking water, Metal.

Total labs

Countries

Available in 5 Countries

United States

7 labs

Germany

2 labs

China

1 lab

United Kingdom

1 lab

Japan

1 lab

Top matrices for ASTM D1525

Top analytes for ASTM D1525

Ball Indentation Hardness (1)
Density (1)
Fogging (1)
Melting Point (1)
Melt Mass-Flow Rate (1)

Sample labs

Element Materials Technology Anaheim

Anaheim, CA, US

ASTM D1525; UL 746A Visual Inspection IPC-A-600; IPC-A-610; IPC-TM-650 (Methods, 2.1.8, 2.2.1, 2.2.2, and 2.2.5); IPC-SM-840; MIL-I-46058; MIL-P 50884 2; MIL-PRF-50884 2; MIL-PRF 31032 2; MIL-PRF 55110 2; ANA-0024-006

DatapointLabs

Ithaca, NY, US

ASTM D1525 Environmental Stress-Cracking of Ethylene Plastics ASTM D1693 (Conditions A and B)

UL International Germany GmbH Standort Krefeld

Krefeld, DE

ASTM D1525 2017 Standard Test Method for Vicat Softening Temperature of Plastics ASTM D648 2018 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ISO 75 -1 2013-04 Kun

DEKRA Testing and Certification (Shanghai)

Shanghai, CN

ASTM D1525 Melt Mass Flow Rate and Melt Volume Flow Rate GB/T 3682.1; ISO 1133-1; ASTM D1238 Insulation resistivity GB/T 1692 Xenon-Arc Sources Test SAE J2412; SAE J2527; GB/T 16422.2; ISO 4892-2

Advanced Composites, Inc. Tennessee Facility - Engineering

Nashville, TN, US

ASTM D1525; ISO 306

Chemitox, Inc., Yamanashi Testing Center KAI

Yamanashi-ken 408-0103, JP

ASTM D1525; ISO 306; JIS K7206 Relative Thermal Endurance Index (RTE, RTI) IEC 60216-5, IEC 61730-1; UL 746B; JIS C61730-1 20 mm Flame Confirmation Test ASTM D5207; IEC 60695-11-4 125 mm Flame Confirmation Test A

Deutsches Referenzburo fur Ringversuche und Referenzmaterialien GmbH (DRRR GmbH)

Kempten, DE

ASTM D1525 Heat deflection temperature -ISO 75 -ASTM D648 Burning behavior -FMVSS302 / DIN 75200 -UL 94 V / HB Burning behavior foams -FMVSS 302 / DBL 5307 Glow wire test EN 60695-2-13 Textiles and textile products At least

Ghesquiere Plastic Testing

Harper Woods, MI, US

ASTM D1525; ISO 75, ISO 306; Toyota BSDM 0501, TSM 0501G Humidity / Autoclave Exposures ASTM D1735, ASTM D2247, ASTM D3574 Test J, ASTM D4585; CFFA-110; Ford FLTM BO 012-01, FLTM BQ 104-02; GM9215P (1988); GMW14124 Cycle T, GMW

Intertek Testing Services NA

Kentwood, MI, US

ASTM D1525; ISO 306 Tensile/Elongation ASTM D412; ASTM D638; ASTM D882; ASTM D3574-E; ASTM D5034; ASTM D5035; Chrysler LP-463KB-2-01; TSL 5100G (Section 4.3); ISO 527-1, 2; GMW3010; ISO 1926; TSM 7500G (Section 5.2); DBL 5578 (Sec

ITS Testing Services (UK) Limited (Trading as Intertek Wilton)

Cleveland, GB

ASTM D1525

John J Farber Technology and Innovation Center

Richmond, IN, US

ASTM D1525 Water Absorption ASTM D570 Xenon Arc Weathering ASTM D2565 (Cycle 1) Flame Testing ISO 3795; FVMSS 302; UL 94, Section 7 and 8

Riverview Calibration Services,

Belpre, OH, US

Parameter/Equipment Range CMC2 (±) Comments Extrusion Plastometer – Melt Flow Index3 (cont) Die – Inside Diameter Bore – Outside Diameter Mass – Load Weights 2.10 mm Up to 30 mm (0 to 10) lb