ASTM D523 Accredited Testing Labs Worldwide

ASTM D523 Hardness – Pencil ASTM D3363 Heat (Oven) Aging GMW 14867, Sec. 3.9 Heat Resistance Chrysler LP463LB-13-01 Impact – Gardner ASTM D5420 Insect Repellent Resistance GMW 14445 Mandrel Bend ASTM D522, Method B; GMW 1

ASTM D523 2014 Standard Test Method for Specular Gloss 6.3 Farbmessung, Vergilbung und Glanzschleier ISO 11664 -3 2019-06 Farbmetrik ‒ Teil 3: CIE-Farbwerte ISO 11664 -4 2019-06 Farbmetrik – Teil 4: CIE 1976 L*a*b*

ASTM D523; FLTM BI 110-01; NES M0007 [2014-N], Sect. 21; NES M0141 [2018-N], Sect. 6.1.2 Haze / Transmission Haze-Gard ASTM D1003; HES D6508 [REV.B]; NES M0161 [2011-N]; TSM0501G [REV. 16], Sect. 9.15

ASTM D523; Ford BI 110-01; Navistar MPAPS GT-Paint GT-6A; VOLVO STD 423-0023 Instrumented Color Difference Spectrophotometer L*a*b* (CIELAB) ASTM D2244; SAE J1767 Instrumented Color (45º:0º) Hemispherical (d:8º) ASTM E1349 ASTM

ASTM D523 Specular Gloss ASTM D610 Evaluating Degree of Rusting on Painted Steel Surfaces ASTM D660 Evaluating Degree Checking of Exterior Paints ASTM D661 Evaluating Degree Cracking of Exterior Paints ASTM D662 Evaluating

ASTM D523 Specular Gloss ASTM D610 Evaluating Degree of Rusting on Painted Steel Surfaces ASTM D660 Evaluating Degree Checking of Exterior Paints ASTM D661 Evaluating Degree Cracking of Exterior Paints ASTM D662 Evaluating Degre

ASTM D523 Film Thickness ASTM D7091; ISO 21809-1, Annex A; ISO 21809-3, Annex B

ASTM D523 Flexibility ASTM D522, D1737 Cure GM9509P (superseded 2012)2; GMW 15891 Odor FLM BO 131; SAE J1351 Circuit Board Inspection Acceptability of Electronic Assemblies IPC-A-610F; GMW3172-DRBTR

ASTM D523 AATCC-1, ISO-105-A02 VW/AUDI: TL 52064 6.9 / PV 1200; FORD: WSS-M99P43-E1/E2 3.12.3; Nissan M0602, GMW3262, GMW14124; TL 52064 SAE J1756; GMW3235; LP-463DB-12-01; TSM0503; PV 3010; DIN 75201; DIN EN ISO 17071; MS 3

ASTM D523; FIAT CHRYSLER FCA 50457; FORD FLTM BI 110-01; SUBARU TS430-07-026 (1-3); HONDA HES D6501 (3.3); HYUNDAI MS700-60 (4.5); ISO 2813 TOYOTA TSH1519G VOLVO 423-0023 Grain Retention of Interior Trim Materials GM 9142P H

ASTM D523 Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates ASTM D2244 Measuring Adhesion by Tape Test ASTM D3359 (Method A and B) Film Hardness by Pencil Test ASTM D3363 Resistance

ASTM D523 Test Method for Specular Gloss WEATHERING AND CORROSION EVALUATIONS: VISUAL ASSESSMENT ISO 105-A02 Grey Scale for Assessing Change in Colour ASTM D2616 Evaluation of Visual Colors Difference with a Gray Scale PHYSICAL AN

4.8 Glanzmessung und Farbbeurteilung [Flex B] Prüfart Messgröße / Parameter Prüfgegenstand Reflektometer Glanzbeurteilung Formteile aus Kunststoff, Folien, Tafeln, Verbundwerkstoffe, Duromere Beispielhafte Prüfverfahren:

ASTM D523 Conditioning Plastics for Testing ASTM D618; ISO 291 Tensile Properties ASTM D638; ISO 527-1, -2 Deflection Temperature Under Flexural Load ASTM D648 (Method B); ISO 75-1, -2 Flexural Properties ASTM D790; ISO 17

ASTM D523; ISO 2813 Hardness (Shore A and Shore D) ASTM D2240 Heat Resistance AMS 3095; ISO 3270 Impact Resistance ASTM D2794; ISO 6272-1, 6272-2 Paint Viscosity – Zahn Viscosity – Ford ASTM D4212 ASTM D1200 Peel Adhe

ASTM D523, ASTM D1003, ASTM D1455; Ford FLTM BI 110-01, FLTM BI 010-02; Honda HES D6501; ISO 2813 Hardness ASTM D785 (R Scale), ASTM D2240 (Shore A, D), ASTM D3363; Ford FLTM BI 151-01; Honda HES D6501; ISO 48-4, ISO 868, ISO 20

ASTM D523; FLTM BI 110-01; HES D6501 Method 3.3; ISO 2813; NES M0007 Section 21 Insulating Fluid Resistance IEEE C57.12.31-2020(Section 5.4.4); IEEE C57.12.28-2014 (Section 5.5.4); IEEE C57.12.29-2023 (Section 5.5.4) Color A

ASTM D523 Conditioning Plastics for Testing ASTM D618; ISO 291 Tensile Properties ASTM D638 (except A.3); ISO 527-1, -2; ISO 37 Heat Deflection Under Load ASTM D648 (Method B); ISO 75-1, -2 Brittleness Temperature ASTM D

ASTM D523; FLTM BI 110.01; DIN 53236; DIN EN ISO 2813; MBN 10494-4 (Section 5.1) Chip Resistance ASTM D3170; Chrysler LP-463PB-39-01; GM 9508P; GMW14700; SAE J400; FLTM BI 107-01; ISO 20567-1; DBL 7399 (Section 5.3); MBN 10494-5

ASTM D523 Test Method for Specular Gloss ISO 2813 Determination of Specular Gloss of Non-Metallic Paint Films at 20°, 60°, and 85° WEATHERING EVALUATIONS: VISUAL ASSESSMENT ASTM D2616 Evaluation of Visual Colors Difference with a Gra

ASTM D523 Evaluations ASTM D610; ASTM D714; GMW 15356; GMW 15357; GMW 15358; GMW 15359; ASTM D1654; GMW 15282 Water Immersion ASTM D870; FLTM BI 104-01 Fuel Resistance of Automotive Exterior Materials and Components GMW 14334; Chry

ASTM D523 Standard Test Method for Specular Gloss ASTM D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents ASTM D570 Standard test method for water absorption of plastics

ASTM D523; ISO 2813 Soiling & Cleanability APM-0001/1 Scratch and Tape Adhesion ASTM D3359; ISO 1518-01; GMW 14829; ISO 1518; ISO 2409 Chemical Resistance ASTM D1308; GMW 3402; FLTM BN 112-08; LP463PB-31-01 Flammability (Hor

Plastlab Scarl Via dell’Artigianato 2 - zona industriale Malosnà 10043 Orbassano TO Allegato al certificato di accreditamento n. 01291 rev. 4 del 23/01/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 18 Sede A Data: 26/05/2025 pag

ASTM D523 Specular Gloss ASTM D610 Evaluating Degree of Rusting on Painted Steel Surfaces ASTM D660 Evaluating Degree Checking of Exterior Paints

ASTM D523 Specular Gloss ASTM D610 Evaluating Degree of Rusting on Painted Steel Surfaces ASTM D660 Evaluating Degree Checking of Exterior Paints ASTM D661 Evaluating Degree Cracking of Exterior Paints ASTM D662 Evaluating Degree Erosio

ASTM D523 Adhesion ASTM D3359, ISO 2409 Adhesive Peels ASTM D903; MW 14892; PF-90223 (Peel Strength), RTS 1806 Ash Content ISO 3451-1 (Method A), ISO 1172 (Method A) Chemical Resistance PF-11203; FLTM BN 112-08; LP-463PB-31-01 Col