FindTestingLabs
Registers collected 2026-08-22.See collection dates

ISO 1167-1 Accredited Testing Labs Worldwide

12 accredited laboratories in 5 countries hold ISO 1167-1 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Italian Accreditation Body, Deutsche Akkreditierungsstelle. In the register, ISO 1167-1 scope entries most often cover Concentration, Flexural Strength in Building materials, Plastics, Wood.

Total labs
12
Countries
5

Available in 5 Countries

Germany
4 labs
Italy
3 labs
Sweden
2 labs
United States
2 labs
Netherlands
1 lab

Top matrices for ISO 1167-1

Building materials
1 lab
Plastics
1 lab
Wood
1 lab

Top analytes for ISO 1167-1

  • Concentration (1)
  • Flexural Strength (1)

Sample labs

DBI - Gastechnologisches Institut gGmbH Freiberg DVGW-Prüflaboratorium Energie
Freiberg, DE

3 Sicherheits-, Regel- und Steuereinrichtungen und -geräte für Wärmeerzeugungsanlagen* DIN EN 12514 2022-01 Komponenten für Versorgungsanlagen für Verbrauchsstellen mit flüssigen Brennstoffen (hier: Abschnitt 5 ) 4 Prüfung von

TRI Environmental
Austin, TX, US

ISO 1167-1, -2

RISE Research Institutes of Sweden
Mölndal, SE

ISO 1167-1 Byggprodukter Ja 2 EN ISO 1167-2 Byggprodukter Ja 2 ISO 4437 Byggprodukter Ja 2 Viskositet EN ISO 13229 Byggprodukter Ja 2 Sida 3 (6)

Ianni & Partners
Borgomanero, IT

ISO 1167-1:2006, EN ISO 1167-2:2006, EN ISO 1167-3:2007, EN ISO 1167-4:2007, ISO 1167-1:2006, ISO 1167-2:2006, ISO 1167-3:2007, ISO 1167-4:2007, UNI EN ISO 1167-1:2006, UNI EN ISO 1167-2:2006, UNI EN ISO 1167-3:2008, UNI EN ISO 1167-4:2008

NSF International
Ann Arbor, MI, US

ISO 1167-1 Thermoplastics Pipes for the Conveyance of Fluids – Determination of Resistance to Rapid Crack Propagation (RCP) – Small-Scale Steady-State Test (S4 test) ISO 13477 Polyolefin Pipes for the Conveyance of Fluids - Deter

SKZ - Testing
Würzburg, DE

ISO 1167-1 bis-4 ASTM D 1598 Langsames Risswachstum unter Innendruck Zeit [s] Weg [mm] DIN EN ISO 13479 Schnelles Risswachstum Weg [mm] Druck [bar] ISO 13477 Durchfluss Volumenstrom [l/s] DIN EN 1111 DIN EN 1112 Physikalische Prü

Deutsches Referenzburo fur Ringversuche und Referenzmaterialien GmbH (DRRR GmbH)
Kempten, DE

ISO 1167-1/-2, Ring stiffness (pipes) ISO 9969, Sealed-seam strength (films) DIN 55529, Adhesion of multilayer pipes ISO 17454, Ash content ISO 1172, Quantitative infrared spectroscopy Rubber At least once a year Physica

TÜV SÜD Industrie Service GmbH
München, DE

This document is a translation. The definitive version is the original German annex to the accreditation certificate. 6.3 Testing of pipes, fittings and sheets made of thermoplastic or thermosetting materials DIN EN ISO 1167 -1 2006

Kiwa CERMET Italia S.p.A. con socio unico
Cadriano di Granarolo Emilia, IT

ISO 1167-1:2006, UNI EN ISO 1167-2:2006, UNI EN ISO 1167-3:2008, UNI EN ISO 1167-4:2008 _ Legenda/Note Il simbolo (1), se presente, indica: "Materiale/Prodotto/Matrice" non previsto dal metodo ma assimilabile/The symbol (1), if present,

Element Materials Technology
Karlskoga, SE

ISO 1167-1 Construction products Yes 2 No SS-EN ISO 1167-2 Construction products Yes 2 No Strength testing ASTM D2837 Construction products Yes 2 No SS-EN ISO 9080 Construction products Yes 2 No Physical properties Technical area Parameter

Kiwa Nederland
RIJSWIJK ZH, NL

ISO 1167-1 ISO 1167-2 ISO 1167-3 ISO 1167-4 ISO 13479 AP ISO 1167-1 ISO 1167-2 ISO 1167-3 ISO 1167-4 BO

IIP Srl - LABORATORIO PROVE
Monza, IT

ISO 1167-1:2006, EN ISO 1167-2:2006, EN ISO 1167-3:2007, EN ISO 1167-4:2007, ISO 1167-1:2006, ISO 1167-2:2006, ISO 1167-3:2007, ISO 1167-4:2007, UNI EN ISO 1167-1:2006, UNI EN ISO 1167-2:2006, UNI EN ISO 1167-3:2008, UNI EN ISO 1167-4:2008