16 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform IEC 60068-2-27 testing. From the accredited scope text: “IEC 60068-2-27; MIL-STD-202G Method 213B, MIL-STD-810 (D, E, F, G, H) Method 516, MIL-STD-810F Method 519, MIL-STD-883E Method 2002, MIL-STD-1344A Method 2004; RTCA/DO-160 G Section 7; SAE J1211 Secti” “IEC 60068-2-27; ISO 16750-3; JDQ 53.3; MIL-STD-202 (G, H) methods 213; MIL-STD-810 (G, H) method 514; Nissan 28401NDS01; SAE J 1455; TSC 7000G; USCAR-2” “IEC 60068-2-27 (2008-02, Edition 4.0); IEC 60068-2-29 Vibration (Sine and Random) – Frequency (5 to 3000) Hz Rating Up to 25 000 lbf MIL-STD-810C, Method 514.2; MIL-STD-810D, Method 514.3; MIL-STD-810” “IEC 60068-2-27, IEC 60601-1-11 (Clause 10.1); MIL-STD-810 516.8 (Procedures I-VI)”
Redmond, WA, US
IEC 60068-2-27; IEC 60068-2-47; IEC 60068-2-59; IEC 60068-2-64; MIL-STD-810E/F/G/H Sec. 514, 516, 519; MIL-STD-883G/H Sec. 2002, 2005, 2007; MIL-STD-202G Sec. 201, 204, 213, 214; RTCA DO-160 D, E, F, G Sec. 7.0, 8.0; ISTA 2A, 3A, 6
Easton, PA, US
IEC 60068-2-27; IEC 60255-21-2:1988 RTCA/DO-160, rev. E-G, Section 7 MIL-STD-810, rev. E-H, Method 517 MIL-STD-810, rev. E-H, Method 517 1 This laboratory also uses customer supplied specifications and/or methods directly related t
Minneapolis, MN, US
IEC 60068-2-27; IEC 60068-2-31; ASTM D5276; GR-3121-CORE; GR-3123-CORE
Auburn Hills, MI, US
IEC 60068-2-27; IEC 60601-1-12 Section 10; IEC 60068-2-27; IEC 60601-1-11 Section 10; IEC 60068-2-31; IEC 60601-1-12 Section 10; IEC 60068-2-31 Multi-Axial Vibration (MAST) ECE R100 Electrical Testing* GMW3172 Altitude* MIL-S
Duluth, GA, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 INTERTEK TESTING SERVICES NA INC. 3933 U.S. Route 11 Cortland, NY 13045 Terence O’Beirne Phone: 607 758 6316 www.intertek.com MECHANICAL Valid To: March 31, 2027
San Jose, CA, US
IEC 60068-2-27, IEC 60601-1-11 (Clause 10.1); MIL-STD-810 516.8 (Procedures I-VI)
Delafield, WI, US
IEC 60068-2-27; MIL-STD-202G Method 213B, MIL-STD-810 (D, E, F, G, H) Method 516, MIL-STD-810F Method 519, MIL-STD-883E Method 2002, MIL-STD-1344A Method 2004; RTCA/DO-160 G Section 7; SAE J1211 Section 4.8, SAE J1455 Section 4.11
Santa Clara, CA, US
IEC 60068-2-27; ANSI C12.1, C136.3; EN/IEC 60601-11, Sect. 10.1 3.a, b, d; ST/SG/AC.10/11, Sect. UN 38.3 T4 Packaged Drop Test/ Unpackaged Drop Test Requirements of Standard Telcordia GR-63-CORE; GR-487-CORE; GR-950-CORE; GR
Kentwood, MI, US
IEC 60068-2-27; GMW 3172 Section 9.3.3, 9.3.4 & 9.3.5; DC-10611 Section 6.2.2; CS.00056 Section 5.4.4; WDS-00.00EA-D11 Section 4.6.3; UN 38.3; ISO 16750-3 Section 4.2 Salt Spray/Cyclic Corrosion ASTM B117; USCAR-1;
North Billerica, MA, US
IEC 60068-2-27 (2008-02, Edition 4.0); IEC 60068-2-29 Vibration (Sine and Random) – Frequency (5 to 3000) Hz Rating Up to 25 000 lbf MIL-STD-810C, Method 514.2; MIL-STD-810D, Method 514.3; MIL-STD-810E, Method 514.4; MIL-STD
Santa Clara, CA, US
IEC 60068-2-27; IEC 60068-2-29; ETSI EN 300-019-2-1 through -8; ETS 300-019-2-3; RTCA/DO-160 Section 7.0 Mechanical Vibration 2 (1-200 hz up to 8 G’s/Rms) (5-2000 hz up to 50 G’s/Rms) GR-63; GR-487; MIL-STD-810 Method 514,
Apex, NC, US
IEC 60068-2-27; RTCA DO-160 Sec. 7; ANSI/EIA-364-27; SAE J1455 Sec. 4.11; AECTP400 Method 403 Vibration: Sine1 Force Rating: Up to 6 000 lbf Frequency Range: (5 to 2500) Hz Sine Velocity: Up to 70 in/s Maximum Level: Up to 120 gn
Kokomo, IN, US
IEC 60068-2-27; ISO 16750-3; JDQ 53.3; MIL-STD-202 (G, H) methods 213; MIL-STD-810 (G, H) method 514; Nissan 28401NDS01; SAE J 1455; TSC 7000G; USCAR-2
St. Paul, MN, US
IEC 60068-2-27; MIL-STD-810 (Method 516) Shock, Thermal MIL-STD-202 (Method 107G) Temperature/Humidity/Pressure IEC 60601-1-11 Xenon-Arc Light Exposure, With and Without Water ASTM D2565, G155 Vibration IEC 60068-2-64; MIL
Austin, TX, US
IEC 60068-2-27; MIL-STD-810, Method 516, Procedure II, IV, and VI 1Using customer supplied specifications directly related to the types of tests listed above
Plano, TX, US
IEC 60068-2-27
This page is a fixed slice of the register: every IEC 60068-2-27 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.