ASTM D624 Accredited Testing Labs Worldwide
13 accredited laboratories in 4 countries hold ASTM D624 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D624 scope entries most often cover Hardness, Ash Content, Density / Specific Gravity in Plastics, Drinking water.
Available in 4 Countries
Top matrices for ASTM D624
Top analytes for ASTM D624
- Hardness (2)
- Ash Content (1)
- Density / Specific Gravity (1)
- Adhesion (1)
- Length (1)
- Stain (1)
- Voc Emissions (1)
Sample labs
ASTM D624; ASTM D5733; HES D6506 [REV.5], Sect. 5.6; ISO 7214, Sect. 8.7; ISO 8067; NES M0076 [2023], Sect 13; NES M7108[2005-N], Sect. 8; TSL5100G [REV.8], Sect. 4.4 Tensile ASTM D3574, Test E; ASTM D952; AST
ASTM D624 Flexural Properties of Plastics ASTM D790; ISO 178 Physical Properties Density/Specific Gravity ASTM D792, D297 Taber Abrasion ASTM D4060; MIL-A-8625 Corrosion/Environmental Testing Coating Evaluation ASTM
ASTM D624 Tear Resistance
ASTM D624, D1004, D3574 (Test F); DSM ESX-60523 (4.6), ESX-83217 (4.9), ESX-83220 (4.7); ISO 13937-2, 9073-4; LP-13160; RIVIAN RTS.1773 Tear Strength ASTM D751 (16) (Proce dure B - Tongue Tear Method), D2261 Tensile Properties
ASTM D624; ISO 34-1 Hardness ASTM D2240, Shore A & D; ISO 7619-1 Resistance to Ozone Cracking ASTM D1149, Method A, Procedure A1, Method B, Procedure B1, and Procedure B4 Plastics Density and Relative Density ASTM D792; ISO 1183-1
ASTM D624; ISO 34-1 Compression Up to 6 750 lbf ASTM D575 ISO 7743 Compressive Stress (Relaxation) Up to 6 750 lbf ASTM D6147 ISO 3384 Compression Set D.L. = ± 1.35 % ASTM D395 ISO 815 Hardness Shore A & D ASTM D2240 ISO
ASTM D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers (Die B & C) ASTM D635 Test Method for Rate of Burning and/or Extent and Time Burning of Self- Supporting Plastics in a Horizonta
ASTM D624, ASTM D1004; CFFA-26 a; ISO 34 Elmendorf ASTM D751, ASTM D1117, ASTM D1424, ASTM D1922, ASTM D5734 (2008); CFFA-16 a, CFFA-26 b; ISO 6383 Stitch ASTM D4705; GM9149P (2015) Tongue ASTM D751, ASTM D1117, ASTM D1938, ASTM
ASTM D624 (except Die B); ASTM D1004; ASTM D3574; Chrysler LP-463KB-3-01; TSM 7500G; ISO 13934-1; TSL 5100G; ASTM D2261, D5733-99 (Withdrawn 2008) 3; PV 3946; ISO 34-1; GS93010-2 (7.3); VCS 1024, 37219 Temperature Deflection (HUL,
ASTM D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers ASTM D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D624 (Die C), D2261, D3574 (F), D5587, D751 (28-35); GMW3326; ISO 4674-1, 8067, 13937-2; JIS K6400 (11); MS 300-31 (4.9), 300-32 (4.7.1, 4.7.2); NES M0086 (12); TSL 2100G (4.12), 2105G (4.3), 2106G (4.2, 4.3); TSM 7100G (4.6)
ASTM D624 (Type T), D790, D1056, D1894, D2261, D3574 (Test B-F), D3575 (Test B, D, G, T), D5034, D5035, D5587; FLTM BN 015- 02; GMW 3010, GMW 3326; ISO 3386- 1, 3386-2; SAE J386 (5.2.6, 5.2.7), J815, J855; ISO 178 Odor SAE J1351;
ASTM D624-00(2020) ISO 34-2:2022, UNI ISO 34-2:2015 ISO 34-1:2022, UNI ISO 34-1:2015 Resistenza alla trazione e allungamento a rottura dopo invecchiamento/Tensile stress-strain properties after ageing ISO 188:2023 + DIN 53504:2017, UNI