ASTM D3574 Accredited Testing Labs Worldwide
11 accredited laboratories in 4 countries hold ASTM D3574 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D3574 scope entries most often cover Hardness, Odor, Fogging in Metal, Air, Fasteners.
Available in 4 Countries
Top matrices for ASTM D3574
Top analytes for ASTM D3574
- Hardness (2)
- Odor (2)
- Fogging (1)
- Density / Specific Gravity (1)
- Voc Emissions (1)
- Sulfur Dioxide (1)
- Dimensional Stability (1)
Sample labs
ASTM D3574-17 Test E Glass in building - Explosion-resistant security glazing - Test and classification for arena air-blast loading ISO 16933:2007 Glass in building - Security glazing - Testing and classification of resistance against b
ASTM D3574, Test I3; ESBT4P-7H420-AD [REV. A], Sect. A.5, A.18; PF.90015 [Change Level F], Sect. 6.3.14, 6.3.15; RTS.3593, Sect. 6.1, 6.3, 6.5; SAE J343, Sect. 4.2, 4.4, 4.6 Sand and Dust Temperature (ambient to 70) °C Blowing San
ASTM D3574; STRYKER ES-0668, ES-0703 Hardness; Pencil Hardness GM9502P (superseded 2012)2, GM9150P (superseded 2012)2, GM 4350M (superseded 2013)2; ASTM D3363; HES D2016-99A, HES D6501-03 C Rev.2; NISSAN NES M 0007 (2006-N)
ASTM D3574 (Method D); ISO 1856 Tension set DIN ISO 2285 (Oven with forced air circulation, type 1) Peel test MBN 10518(Sec 5.1) MBN 10526(Sec 6.2~6.3) MBN 55555-6(Sec 5.21, Sec 5.24) Shear test MBN 10518(Sec 5.2) MBN 105
ASTM D3574, Compression stress value foams ISO 3386-1 / DBL 5452, Barcol hardness EN 59 / ASTM D2583 Rubber At least once a year Hardness Hardness Shore A, ISO 868 / ISO 7619 / ISO 48, Hardness Shore A ASTM D2240, IRHD-Hardn
ASTM D3574, ASTM D3575; Chrysler LP-463CB-10-01, LP-463DD-8-02, LP-463KC-15-01, LP-463LB-12-01, LP-463LB-13-01, LP-463PB-22-01, LP-463PB-36-01, LP.7M070; Ford FLTM BI 107-02, FLTM BN 113-02, FLTM BN 113-03, FLTM BO 015-03, FLTM BQ 1
ASTM D3574 (Sections A, B1, B2, C, D, F, H, I, J, & K); ASTM D3770; GM 7452M Heat Deflection Temperature (HDT) ASTM D648; TSM 0501G
ASTM D3574-K; LP-463LB-13-01 Ash Conten t ASTM D2584; ASTM D5630-B; FLTM BO 006-01; GM9077P2 (Inactive 03/2013, no replacement); ISO 3451-1 (Method A) Blocking ASTM D751 (sections 89-93); GMW14132 Environment
ASTM D3574 (H); ESX-83218 (4.15); JIS K6400 (9); TSM 7100G (4.7) Bow and Skew ASTM D3882; Chrysler LP-463KB-14-01; GMW3023 (4.2) (Inactive 2008) Cleaner Resistance GMW3402 (Procedure B) Cold Resistance MS-AY 310
ASTM D3574 (Tests A, B1, B2, D, E, F, H, I3, K and L) ANSI/RESNA SS-1: Thermal: (Section 3, 4, 8) Support Surface Characterization: (Section 2, 5, 6, 7)
Test Description/ Equipment Parameter Test Method(s): Linear Abrasion (Taber) (0.2 to 4.0) inch stroke length, (2 to 75) cycles/minute, 2100 gram max load GMW 14130; ISO 1518 Martindale Abrasion LP-463KC-04-03; ISO 12945-2 (pilli