ASTM D412 Accredited Testing Labs Worldwide
15 accredited laboratories in 5 countries hold ASTM D412 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D412 scope entries most often cover Ash Content, Compressive Strength, Hardness in Plastics, Metal, Building materials.
Available in 5 Countries
Top matrices for ASTM D412
Top analytes for ASTM D412
- Ash Content (1)
- Compressive Strength (1)
- Hardness (1)
- Weight Loss (1)
Sample labs
ASTM D412 (Method A) Rubber Properties in Compression ASTM D575 (Method B) Conditioning of Plastics for Testing ASTM D618 Tensile Properties of Plastics ASTM D638 Deflection Temperature of Plastics Under Flexural Load in the Edge
ASTM D412, D638, D695, D1414 (Section 8), D1708; ISO 527-1 Peel ASTM D1876, D3167 Shear ASTM D1002 Tear ASTM D624 Flexural Properties of Plastics ASTM D790; ISO 178 Physical Properties Density/Specific Gravity ASTM D792
ASTM D412 Vulcanized Rubber and Thermoplastic Elastomers – Tension ASTM D968 Abrasion Resistance of Organic Coatings by Falling Abrasive ASTM D1653 Water Vapor Transmission of Organic Coating Films ASTM D2697 Volume Nonvolatile Matter i
ASTM D412 Tensile Properties of Plastics ASTM D638 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ASTM D790 Tensile Properties of Thin Plastic Sheeting ASTM D882 Apparent Shear Strength
ASTM D412, D638, D882 UL 746A (Sections 10-12); CAN/CSA C22.2 No.0.17 (Section 6.7); ISO 527-1, 527-2, 527-3, 527-4, 527-5; JIS K6911, K7127, K7161-1, K7161-2, K7164, K7165 Flexural Strength Test ASTM D790; UL 746A (Section 16); CAN/
ASTM D412 ISO 37 Tear Up to 6 750 lbf ASTM D624; ISO 34-1 Compression Up to 6 750 lbf ASTM D575 ISO 7743 Compressive Stress (Relaxation) Up to 6 750 lbf ASTM D6147 ISO 3384 Compression Set D.L. = ± 1.35 % ASTM D395 ISO 815
ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermo plastic Elastomers - Tension ASTM D471 Test Method for Rubber Pro perty-Effect of Liquids (Section 15 only) ASTM D495 Test Method for High-Volta
ASTM D412, ASTM D638, ASTM D882; UL 746A (Sections 10-12); CAN/CSA C22.2 No.0.17 (Section 5.5); ISO 527-1, ISO 527-2, ISO 527-3, ISO 527-4, ISO 527-5; JIS K6911, JIS K7127, JIS K7161-1, JIS K7161-2, JI
ASTM D412; SAE AS5127/1 – 7.7 Shear Strength SAE AS5127/1 – 7.8 Corrosion Resistance SAE AS5127/1 – 7.9 Corrosion Stressed Assembly and Mixed Metals SAE AS5127/1 – 7.10 Crazing SAE AS5127/1 – 7.11 Peel Strength (180˚) SAE AS
ASTM D412 Tear resistance ISO 34, Trouser/angle test piece, Compression set ISO 815-1/-2, Tensile set ISO 2285 Leather At least once a year Tensile properties Tear load Tensile test ISO 3376, Tear load – single edge tear ISO
ASTM D412, ASTM D461, ASTM D638, ASTM D751, ASTM D882, ASTM D1056, ASTM D1117, ASTM D2208, ASTM D2209, ASTM D2211, ASTM D2256, ASTM D3574, ASTM D3575, ASTM D3759, ASTM D3826, ASTM D4632, ASTM D5034, ASTM D5035; CFFA-17, CFFA-27;
ASTM D412; ASTM D638; ASTM D882; ASTM D3574-E; ASTM D5034; ASTM D5035; Chrysler LP-463KB-2-01; TSL 5100G (Section 4.3); ISO 527-1, 2; GMW3010; ISO 1926; TSM 7500G (Section 5.2); DBL 5578 (Section 7.2); DIN 53504; ISO 1798; ISO 3376
Test Technology: I. Mechanical Tests Continued Test Methods: Uniaxial Tensile ASTM A370, B557, D412, D638, E8/E8M, E21 Compression Testing of Metallic Materials at Room Temperature ASTM E9 Flexural Properties of Reinforced Polymer
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension ASTM D471 Standard Test Method for Rubber Property – Effect of Liquids ASTM D522 Standard Test Methods for Mandrel Bend Test of Attached O
ASTM D412-16(2021) Resistenza alla trazione e allungamento a rottura/Tensile stress-strain properties DIN 53504:2017 Resistenza alla trazione e allungamento a rottura/Tensile stress-strain properties ASTM D412-16(2021) _ _ _ _ _ _