ISO 11452-2 Accredited Testing Labs Worldwide

Test Technology: Test Method(s): Generic and Product Specific Standards (cont.) EN 301489-19; EN 301489-50; EN 301489-52; EN 300386; EN 300386 V1.6.1; EN 300386 V2.1.1; EN 300386 V2.2.1; EN 55035; EN 55035:2017; BS EN 55035;

ISO 11452-2 Conducted Transient Immunity ISO 7637-2; ISO 7637-3 Off-Vehicle Radiation Sources ISO 11451-2 Harness Excitation Methods ISO 11451-4 Absorber Lined Chamber ISO 11452-2 Transverse Electromagnetic (TEM) Cell ISO

ISO 11452-2:2004* Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure Limitation: Frequency up to 6 GHz Auto- motive ISO 11

ISO 11452-2:1995 200 MHz to 18 GHz A, B ISO 11452-2:2004 A, B ISO 11452-4:1995 1 MHz to 400 MHz A, B ISO 11452-4:2005 including Corrigendum 1:2009 excluding clause 7.6.2; Figure 2 and clause 8.3.2 A, B ISO 11452-4:2011 excludi

ISO 11452-2 (2019); ISO 11452-4 (2020); ISO 11452-4 (2011); ISO 11452-8 (2015); ISO 11452-9 (2012); ISO 11452-9 (2021); ISO 16750-2:2012; ISO 16750-2 (2023); Ford ES-XW7T-1A278-AA

ISO 11452-2:2019 Straßenfahrzeuge - Elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Prüfverfahren für Komponenten – Teil 2: Absorberraum EMV ISO 11452-3: 2016 Third edition Road vehicles -- Compone

ISO 11452-2:2019 _ _ _ _ _ _ _ Prove di immunità ai campi magnetici/Magnetic fields immunity test Prove di immunità ai transienti elettrici attraverso accoppiamento capacitivo e induttivo su linee diverse da quelle di alimentazione

ISO 11452-2:2004-11 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined chamber (2004) EMV UNECE R10, Rev. 6 Regulation No 10 of the Economic C

ISO 11452-2 Radiated Immunity – Portable Transmitters ISO 11452-9 Magnetic Field Immunity ISO 11452-8 (excluding Helmholtz coil method) Bulk Current Injection ISO 11452-4 Electrical Disturbances from Conduction and Coupling (

ISO 11452-2; ISO 11452-2 (2019) Road Vehicles — Component Test: Methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 2: Absorber-lined Shielded Enclosure Radiated Immunity – BCI (10 kHz – 400 M

ISO 11452-2; E/ECE/324/Add. 9 R10 (section 6.8) TEM Cell RF Immunity ISO 11452-3; E/ECE/324/Add. 9 R10 (section 6.8) Bulk Current Injection RF Immunity ISO 11452-4 (excluding TWC method); E/ECE/324/Add. 9 R10 (section 6.8) Str

ISO 11452-2:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure 250 MHz to 2 GHz EM V ISO 11452-4:2011 Road vehicles -

ISO 11452-2:2004 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure (Straßenfahrzeuge – Komponentenprüfverfahren für elektrisc

ISO 11452-2:2004, ISO 11452-2:2019 _ ISO 7637-3:2016 Prove di immunità/Immunity tests - solo/only Annex 9; Escluso/excluding Impulso 5 ed emissioni irradiate/pulse 5 and Radiated emissions UNECE 116R01/01 (2023) Dispositivi elettromecc

ISO 11452-2; ISO 11452-1; GB/T 33014.2; GB/T 33014.1; GB/T 24347; GB/T 18488; GB/T 40432; GB/T 40428; GB/T 36282, SAE J551-5 Conducted Transient Immunity UN-R10; SAE J1113-11; SAE J1113-12; ISO 7637-2; ISO 7637-3; ISO 7637-4; ISO 7637

Bereich Norm / Hausverfahren / Version Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkung EMV OIML 011:2013 General requirements for measuring instruments - Environmental conditions Nur Prüfungen nach 12.3: Ta

ISO 11452-2:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiated Electromagnetic energy - Part 2: Absorber-lined shielded enclosure EMV ISO 11452-4:2011 Road vehicles - Component test metho

ISO 11452-2 2004-11 Ed. 2.0 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -Part 2: Absorber- Lined shielded enclosure ISO 11452-4 2011-12 Ed. 2.0 Road vehicle

ISO 11452-2; ECE R10 Rev.6

ISO 11452-2; Hyundai/Kia ES 96200-00; ECE R10.07 Reverberation chamber test methods IEC 61000-4-21; ISO 11452-11; Hyundai/Kia ES 96200-00 Radiated Immunity (Portable Transmitters) ISO 11452-9; Hyundai/Kia ES 96200-00

ISO 11452-2; GB/T 33014.2; SAE J1113-21 (Substitution Method, with and without metallic surface) Conducted Transient Emissions ISO 7637-1; ISO 7637-2; SAE J1113-42 Electrical Transient Conduction Along Supply Lines

ISO 11452-2:2004 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure EMV ISO 11451-2:2015 Road vehicles — Vehicle test metho

ISO 11452-2; ISO 11452-4; ISO 10605 Agricultural / Forestry Machinery ISO 14982 (excluding section 6.8)

ISO 11452-2:2019 Road vehicles - Component test methods for electrical disturbances from narrowband radiated Electromagnetic energy - Part 2: Absorber-lined shielded enclosure EMV ISO 11452-3:2001 Road vehicles - Component test meth

EMV DIN EN IEC 55025:2023 -11 VDE 0879-2:2023-11 (EN IEC 55025:2022) Fahrzeuge, Boote und von Verbrennungsmotoren angetriebene Geräte - Funkstöreigenschaften - Grenzwerte und Messverfahren für den Schutz von an Bord befindlichen Em

ISO 11452-2; ISO 11452-4 Agricultural / Forestry Machinery ISO 14982 (excluding section 6.8) Communication Networking Devices IEEE 1613; IEEE 1613.1; IEC 61326-2-4; IEC 61850-3 Home and Building Electronic, Automation, & Co

ISO 11452-2 200 V/m de 200 MHz à 6 GHz et Limitation à 300 V/m à une distance de 1 m Extension de 1,2 – 1,4 GHz 2,7 – 3,1 GHz Radiated Immunity Electric field applied to the component RF generators, amplifiers, antennas, field

ISO 11452-2:2019 Prove di immunità ai campi magnetici/Magnetic fields immunity test ISO 11452-8:2015 Prove di immunità ai transienti elettrici attraverso accoppiamento capacitivo e induttivo su linee diverse da quelle di alimentazione/El

ISO 11452-2: 2019 Road vehicles – Component test method for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure EMV ISO 11452-7: 2003 + AMD1 (2013) Road vehicles

ISO 11452-2; ISO 11452-4; ISO 11452-8; ISO 11452-9; ECE R10 .06 (Sections 6.5.2, 6.6.2, 6.7, 6.8.2.1 BCI & RI and 6.9 only); EN 50498; ISO 7637-2; ISO 7637-3; ISO 16750-2 (excluding ISO 11451, ISO 11452-3/5/10 and CISPR 12)

ISO 11452-2 (up to 300 V/m for radar band) Transverse Electromagnetic (TEM) Cell SAE J1113-24 (up to 200 MHz) Electrical Transient Conduction on Supply Lines/Immunity to Conducted Transients on Power Lines ISO 7637-2; SAE J

ISO 11452-2 (200 MHz to 6 GHz); UN ECE Regulation 10 (Annex 9a) Transverse Electromagnetic (TEM) Cell ISO 11452-3; UN ECE Regulation 10 (Annex 9b) Bulk Current Injection (BCI) ISO 11452-4 (excluding Sections 6.2, 7.6.2, 8.6.2,

ISO 11452-2 (2004, 2019); ISO 11452-2; SAE J1113-21; ECE Regulation 10.06, Annex 9, Section 4.1 Reverberation Radiated Immunity Mode Tuned (200 MHz to 6 GHz) (600 V/m) ISO 11452-11 (2010); ISO 11452-11; IEC 610004-21 (2011); IE

ISO 11452-2, ISO 11452-4, ISO 7637-1, ISO 7637-2, ISO 7637-3, ISO 7637-4 Measurement uncertainty increases with larger reflection factors. Amplitude Modulation3 – Measure 9kHz to 7 GHz (5 to

ISO 11452-2 (ALSE Method)

ISO 11452-2 (2004, 2019) (Absorption Chamber); ECE Regulation 10.05 Annex 9 Section 4.1; ECE Regulation 10.06 Annex 9 Section 4.1 Absorber-Lined Shielded Enclosure (ALSE) Radar Pulse only

Fach- bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV ISO 11451 -1 2015-06 Straßenfahrzeuge - Fahrzeugprüfverfahren für elektrische Störungen durch schm

ISO 11452-2; ISO 13766-1; ISO 13766-2; ISO 14982; UNECE Regulation 10, revisions 6, electronic Sub-assemblies (ESA), Section 6.8 Bulk current injection (BCI) ISO 11452-4 (excluding TWC method); ISO 13766-1; ISO 13766-2; UNECE R

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV ISO 11452 -2 (2004 -11) Road vehicles — Component test methods for electrical disturbances from narrowband

ISO 11452-2:2019-01 Edition 3 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure EMV ISO 11452-4:2020-04 Edition 5 Road v

ISO 11452-2: 2019 80 - 18 000 MHz Fordonskomponenter Nej ISO 11452-4: 2020 1 - 400 MHz Fordonskomponenter Nej Only BCI ISO 11452-8: 2015 DC-150 kHz Fordonskomponenter Nej ISO 11452-9: 2021 360-2700 MHz Fordonskomponenter Nej ISO 7637-2: 20

ISO 11452-2:2019 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure Without HV EMV / EMC ISO 11452-4:2020 Road vehicles - Co

ISO 11452-2:2004, substitution 400 MHz - 10 GHz at method 200 V/m ISO 11451-1:2005+A1:2008 Components / ESA ISO 11451-2:2005 ISO 11451-2:2015 ISO 11451-4:2013 (whole vehicle only at 2004/104/EC Annexes VI, IX Locati

ISO 11452-2

ISO 11452-2, ISO 11452-4, ISO 11452-9) Prove di immunità a scariche di elettricità statica/Electrostatic discharge immunity test (_) Prove di immunità alle variazioni di tensione di alimentazione/Tests of immunity to supply voltage varia

ISO 11452-2:1995 ISO 11452-2:2004, substitution Whole Vehicle and method Component ISO 11452-2:2019 EC Directive 72/245/EC 400 MHz - 6 GHz at 200 V/m EC Directive 2004/104/EC, 6 GHz – 10 GHz at 100V/m Annex VI and

ISO 11452-2 (2019); CS.00244 (2023), Section 5.3.3; GMW 3097 (2022), Section 3.4.2; FMC1278 (2023), RI114; TL81000 (2021), Section 5.2.3; ECE R10.06 Portable Transmitters ISO 11452-9 (2012); CS.00244 (2023), Section 5.3.5; GMW 3

ISO 11452-2:2019 Straßenfahrzeuge – Elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie – Prüfverfahren für Komponenten – Teil 2: Absorberraum EMV ISO 11452-4:2020 Straßenfahrzeuge – Komponentenprüfve

ISO 11452-2; CS-11809; CS-11979; CS.00054; ES-XW7T-1A278-AC (RI 114); EMC-CS-2009.1 (RI 114); FMC 1278 (RI 114); GMW3097; JLR-EMC-CS (RI 114); TL81000; CS.00244 Absorber-lined Shielded Enclosure Radar Pulse Only (600 V/m from

ISO 11452-2:2004; ISO 11452-2:2019; GMW 3097:2019; GMW 3097:2022; GMW 3097:2024; REQ-043878; SMTC 3 800 006; Q/FC-CC06-001A; MES PW 67602E; Q/JLY J7110779E; QBAIC C220026; GWT A D05-02; CEVT 8888621495-004 Bulk Current Injection