FindTestingLabs

ISO 11452-2 Accredited Testing Labs in United States

5 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ISO 11452-2 testing. Accredited providers include Element Materials Technology Fremont Newark, Element Materials Technology - Melbourne, DEKRA Testing and Certification (Suzhou) Co.,, Guangzhou LCS Compliance, DEKRA Certification. Sites located in Fremont, CA, Melbourne, FL, Suzhou, Jiangsu Province, Guangzhou, Sterling, VA.

Labs
5
Top matrix
Top analyte
Primary AB
A2LA
5 labs

Accredited Labs

Element Materials Technology Fremont Newark
Fremont, CA, US

(A2LA Cert. No. 214.26) Revised 09/10/2025 Page 4 of 9 Test: Test Method(s) 1: Automotive EMC Radiated & Conducted Emissions CISPR 25 (sections 6.3, 6.4, 6.5 only); UNECE Regulation 10, Revision 6, Electronic Sub-assemblies (

Element Materials Technology - Melbourne
Melbourne, FL, US

(A2LA Cert. No. 7039.03) 02/11/2025 Page 2 of 3 Test Description: Tests Method(s) 1: Conducted Susceptibility, Radio Frequency2 Radiated Susceptibility, Audio Frequency2 MIL-STD-461, Method CS114; RTCA/DO-160, Section

DEKRA Testing and Certification (Suzhou) Co.,
Suzhou, Jiangsu Province, US

(A2LA Cert. No. 3235.01) Revised 01/23/2026 Page 4 of 18 Test(s): Test Method(s) 1,2: Absorber-Lined Shielded Enclosure (ALSE) 80 MHz to 200MHz, Vertical,

Guangzhou LCS Compliance
Guangzhou, US

(A2LA Cert. No. 5099.01) 12/17/2024 Page 2 of 3 Test Technology: Test Method(s): Radiated Immunity (RI) (80MHz to 100MHz:100V/m; 100MHz to 200MHz:120V/m; 200MHz to 6GHz:200V/m; radar wave 1200MHz to 1400MHz:600V/m; radar wave 2700

DEKRA Certification
Sterling, VA, US

(A2LA Cert. No. 2764.01) REVISED 03/11/2026 Page 5 of 12 Test(s): Test Method(s)1: Absorber-lined Shielded Enclosure (ALSE) ISO 11452-2; SAE J1113-21; ISO 11452-4 (20

About ISO/IEC 17025 in United States

American Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.

ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.

Related searches

Same method, other countries:
All accredited testing labs in United States