ISO 11452-2 Accredited Testing Labs Worldwide

ISO 11452-2; ECE Regulation 10 Annex 9; ISO 13766-1; EN ISO 13766-1; ISO 13766-2; EN ISO 13766-2; ISO 14982; EN 15194; GB/T 17619; Automotive EMC (Cont.) Electrical Load ISO 16750-2; Magnetic Field Immunity ISO 11452-8

ISO 11452-2; ISO 11452-2 (2004) TEM Cell ISO 11452-3; ISO 11452-3 (2016); SAE J1113-24 Bulk Current Injection (BCI) (excluding TWC test method) ISO 11452-4; ISO 11452-4 (2011); SAE J1113-4 Stripline ISO 11452-5;

ISO 11452-2; ISO 11452-2:2019 Conducted Transient Emissions ISO 7637-2; ISO 7637-2:2011 Conducted Transient Immunity Along Supply Lines ISO 7637-2; ISO 7637-2:2011 Conducted Transient Immunity Along Lines Other Than Supp

ISO 11452-2:2004 Absorption Chamber Substitution method 20 MHz to 2 GHz 30 V/m UN Reg 10.05 3.0 Generic and Product Specific EN 61000-6-1:2007 EN 61000-6-2:2005 EN 61000-6-3:2007 + A1:2011 EN 61000-6-4

ISO 11452-2:1995 ISO 11452-2:2004 20 Hz to 18 GHz ISO 11452-3:1995 ISO 11452-3:2001 14 kHz to 18 GHz 200 V/m ISO 11452-5:1995 ISO 11452-5:2002 ISO 11452-9:2012 400 MHz to 1 GHz BS3G100: Part

ISO 11452-2; ISO 11452-2 (2004); SAE J1113-21 Bulk Current Injection (BCI) ISO 11452-4; ISO 11452-4 (2005; 2011); SAE J1113-4; SAE J1113-4 (2014) Conducted Immunity on Power lines Supply Voltage transients ISO 7637-2; ISO 7637-2

ISO 11452-2; GB/T 33014.2; ISO 11452-4; GB/T 33014.4; GB/T 33014.9; ISO 11452-9 Transients Immunity Testing ISO 7637-2; GB/T 21437.2; GB/T 21437.2-2008; ISO 7637-3; GB/T 21437.3; ISO 16750-2 Magnetic Field Immunity Testing G

ISO 11452-2: 2004 Road vehicles- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure EMV ISO 11452-2:2019 Road vehicles- Component test metho

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV ISO 11452 -2:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiat

Fachbereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren transient conduction along shielded high voltage supply lines only EMV ISO 10605: 2023 -06 Road vehicl

ISO 11452-2; SAE J1113-21 Radiated Immunity Anechoic (Radar Pulse Only) ISO 11452-2 Radiated Immunity (Portable Transmitters) ISO 11452-9 Vehicle Radiated Immunity (ALSE) ISO 11451-2 Generic / Product Specific EMC Standards

This document is a translation. The definitive version is the original German annex to the accreditation certificate. Technical field Standard / In-house procedure / Version Title of standard or in house procedure (deviations / mod

Bereich Norm oder Hausverfahren / Ausgabestand Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkungen EMV ISO 7637-3 Technical Corrigendum 1:1995 Road Vehicles – Electrical disturbances from conduction and coupling –

ISO 11452-2:2004, ISO 11452-2:2019 _ Dispositivi per il trasferimento senza fili di energia/Wireless Power Transfer Devices Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I Compatibilità elettromagnetica

ISO 11452-2:2019 Straßenfahrzeuge - Elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Prüfverfahren für Komponenten - Teil 2: Absorberraum 20-200 MHz Emax: 30 V/m 200-1000 MHz Emax: 100 V/m 1000-6

ISO 11452-2; ISO 11452-4; SAE J1113-21 Automotive Transients Immunity Testing ISO 7637-2; ISO 7637-3 (CCC only); ISO 16750-2 (Load Dump) Electrostatic Discharge Testing ISO 10605 Continuous Power Line Disturbances Immunity

ISO 11452-2; CS.00054, Section 5.8.2; CS.00244 Section 5.3.3; GMW 3097, Section 3.4.2; EMC-CS-2009.1 (RI114); FMC1278 (RI114); SAE J1113-21; ECE Regulation 10.06 Annex 9 Radiated Immunity Magnetic Field ISO 11452-8; FMC 1278 (RI

ISO 11452-2

ISO 11452-2; SAE J1113-21UN ECE Regulation 10; ISO 14982; ISO 14982-1; ISO 14982-2; ISO 13766-1; EN ISO 13766-1; BS EN ISO 13766-1; AS ISO 13766.1; ISO 13766-2; EN ISO 13766-2; BS EN ISO 13766-2; AS ISO 13766.2 Bulk Current Injectio

ISO 11452-2 2004 Enclosure (ALSE) ISO 11452-2 2019 (up to 18 GHz, including Radar Pulse) ISO 11452-2 BMW GS95002-2 2013 5.3 BMW GS95002-2 2019 5.3 BMW GS95002-2 2021 6.4 BMW GS95002-2 CEVT Reg. No. 8888621495-1 2016 RI03

ISO 11452-2; SAE J1113-21; ES 96200-00; RNDS-C-00517 Radiated Immunity (Portable Transmitters) ISO 11452-9; ES 96200-00; RNDS-C-00517 Conducted Transient Emissions ISO 7637-2; SAE J1113-42; ES 96200-00; RNDS-C-00517 Conduc

ISO 11452-2; GB/T 17619; GB/T 36282; GB/T 33014.2; ECE R10; VW TL82166; VW TL81000; Jaguar JLR-EMC-CS-2010; Jaguar JLR-EMC-CS; GMW3097; Ford EMC-CS-2009.1; Ford FMC1278; BMW GS-95002-2; BMW GS-95002-5; Daimler MBN 10284-2; Dai

ISO 11452-2 2004 (sections 4, 5, 7, 8, 9); GB/T 17619-1998 (sections 4, 5, 6, 7, 8, 9.1, 9.3); ECE R10 Rev. 5 (sections 6.8.2.1, 6.9, 7.7.2.1, 7.18.2.1); ECE R10 Rev. 6 (sections 6.8.2.1, 6.9, 7.7.2.1, 7.18.2.1); ISO 11452-2 2019 (sec

ISO 11452-2; ISO 11452-2 (2004, 2019) Absorber-Lined Shielded Enclosure (ALSE) Radar Pulse only (up to 600 V/m) ISO 11452-2 ; ISO 11452-2 (2004, 2019) Immunity to Magnetic Fields ISO

ISO 11452-2:2004 ISO 11452-2:1995 ISO 11452-2:20191 Absorber Lined Chamber 400 MHz to 6 GHz up to 600 V/m ISO 11452-9:2012 ISO 11452-9:20211 1(excluding use of HV-AN, AMN, AAN & high voltage power

ISO 11452-2; SAE J1113-21 Transverse Electromagnetic (TEM) Cell ISO 11452-3; SAE J1113-24 Bulk Current Injection (BCI) ISO 11452-4; SAE J1113-4 Strip line ISO 11452-5; SAE J1113-23 Direct Radio Frequency (RF) Power Injection IS

ISO 11452-2; ISO 13766 (section 5.8); EN 13309 (section 4.7); E/ECE/324/Add. 9 R10 (section 6.8); GB/T 17619; GB/T 33014.2; GB 34660 (section 4.7); GB/T 22630 (section 4.4.2); GB 26149 (section 5.1); GB/T 30513 (section 4.3.2.1);

ISO 11452-2; FMC 1278; RI 114; GM GMW3097, Section 3.4.2 Electrical Transient Conduction Along Supply Lines ISO 7637-2; FMC 1278; CE 410/CI 220/CI 221; GMW3097, Sections 3.5.1 and 3.5.2 Electrical Transient Transmission by

ISO 11452-2; ECE R10; BS ISO 11452-2; BS EN ISO 14982; EN ISO 14982; BS EN ISO 13766-1; EN ISO 13766-1; BS EN ISO 13766-2; EN ISO 13766-2; BS EN 15194; EN 15194; SAE J1113-21 (Section 7); VW TL81000 Bulk Current Injectio

ISO 11452-2:2004 1.2.3 Conducted Immunity UN Regulation no. 10 Revision 4. BCI 20 MHz to 400 MHz, 60 mA UN Regulation no. 10 Revision 5 UN Regulation no. 10 Revision 6 ISO 11452-4:2005 (substitution method only)

ISO 11452-2; GB/T 33014.2; ISO 13766-1; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.6 Magnetic Field Immunity (MFI) ISO 11452-8; Q/LQB S-52; Q/JX 08140; BT/SGMWJ 08244.8 Portable Transmitters ISO 11452-9; Q/LQB S-52; Q/JX 08140; BT/SGMW

ISO 11452-2 Bulk Current Injection (BCI) ISO 11452-4 Immunity to Magnetic Fields ISO 11452-8 Portable Transmitters ISO 11452-9 Electrical Loads ISO 16750-2 Product EMC Standards I

ISO 11452-22; ISO 11451-22 Bulk Current Injection (BCI) (excluding TWC method) ISO 11452-42; ISO 11451-42 Magnetic Field Immunity (excluding Helmholtz coil) ISO 11452-8 Electrical transient conduction along supply lines

Testing field Standard / In- House Procedure / Version Title of Standard or In-House Procedure (Deviations / Modifications of Standard) Test Range / Restrictions EM C ISO 7637 -2:2011 Road vehicles – Electrical disturbances from

ISO 11452-2:2004, ISO 11452-2:2019 EMC Dispositivi elettrici ed elettronici per applicazione veicolistiche/Electrical and electronic applications for vehicular, Veicoli/Vehicles Denominazione della prova / Campi di prova Prove di immunit

ISO 11452-2:2019-01 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 2: Absorber-lined shielded enclosure Up to 8 GHz Without HV- System EMV ISO 11452-4:2020-0

ISO 11452-2:2019 Vehicle Component Immunity to Transients SAE J1113-11:2018; ISO 7637-2:2011 (12V Systems only) Screening Attenuation Measurements by Reverberation Chamber Method IEC 61726:2015 Screening Attenuation IEEE Std 2

ISO 11452-2 (2004); ISO 11452-4 (2020); ISO 11452-7 (2003); ISO 11452-8 (2015); ISO 11452-10 (2009); Ford ES-XW7T-1A278-AC; FMC 1278 (2016); GMW 3097; DC-10614 Military / Avionic MIL-STD 461G RE102; RTCA/DO-160G Section 20 (Equipme

ISO 11452-2

ISO 11452-2: 2019- 01 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure bis 6 GHz EMV ISO 11452-2: 2004 Road vehicles -Compon

ISO 11452-2; SAE J1113-21; ISO 11452-4 (2005); ISO 11452-4 (2011, 2020) (excluding TWC Method); SAE J113-4 Bulk Current Injection (BCI) ISO 11452-4 (excluding TWC test method); ISO 11452-4:2020 (excluding TWC test method); SAE J11

ISO 11452-2; ISO 11452-2 (2019); ISO 11452-2 (2004); ISO 11452-3; ISO 11452-3 (2016); ISO 11452-3 (2001) Bulk Current Injection (BCI) ISO 11452-1; ISO 11452-1 (2015); ISO 11452-1 (2005); ISO 11452-4; ISO 11452-4 (2020); ISO 114

ISO 11452-2:2004-11 Straßenfahrzeuge – Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie - Teil 2: Absorber-ausgekleidetes abgeschirmtes Gehäuse AA EMV ISO 11452-2:2017-07 S

ISO 11452-2: 2019-01 Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure EMV ISO 11452-4: 2020-04 Road vehicles — Component te

ISO 11452-2 (up to 6 GHz) Electrical Transients SAE J1113-11; ISO 7637-2; ISO 16750-2 (Sections 4.4, 4.6.3 & 4.6.4) Harley Davidson Component EMC Engineering Guideline EG-812-22614 United Nations UNECE Emissions E/

ISO 11452-2:2004, ISO 11452-2:2019 _ ISO 7637-3:2007, ISO 7637-3:2016 _ Dispositivi elettrici ed elettronici per applicazione veicolistiche/Electrical and electronic applications for vehicular, Veicoli/Vehicles Denominazione della prova

ISO 11452-2 Immunity to Conducted Disturbances in the Extended Audio Frequency Range ISO 11452-10 Bulk Current Injection RF Immunity ISO 11452-4 Immunity to Magnetic Field ISO 11452-8