17 laboratories in United States are accredited by A2LA under ISO/IEC 17025 to perform ASTM D3418 testing. These labs commonly handle Plastics matrices. From the accredited scope text: “ASTM D3418 Test Method for Transition Tem peratures of Polymers by Thermal Analysis ASTM D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints ASTM D3479 Tes” “ASTM D3418 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings ASTM D3567 (sections 6, 7, 8) Standard Test Method for Oxidative-” “ASTM D3418 Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) ASTM D3850 Rapid Thermal Degradation of Solid Electrical Insulati” “ASTM D3418 Thermomechanical Analysis (TMA) ASTM E831, E1545 Coefficient of Linear Thermal Expansion (CLTE) ASTM E228 Thermal Diffusivity by the Flash Method ASTM E1461”
Anaheim, CA, US
ASTM D3418 Ductility IPC 6013; IPC TM 650 (Method 2.4.2.1); IPC-TM-650 (Method 2.4.3.1); MIL-P-50884 2; MIL-PRF-50884 2; MIL-PRF-31032 2 Durability (Reusable Bags) ANA-0024-001 Flammability UL 94 (Sections 7, 8, and 11)
Ithaca, NY, US
ASTM D3418 High Speed Puncture Properties of Plastics Using Load and Displacement Sensors ASTM D3763 Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer ASTM D3835 Unnotched Cantilever Beam
St. Paul, MN, US
ASTM D3418 USP <661> USP <661.1> Volatiles in Air (GC/MS)* LABENV-067 EPA TO-15 ISO 18562: Part 3 Volatiles (GC/MS)* LABENV-020 EPA 8260D ISO 10993: Part 18 <USP 1663> Identification of Non-Volatile Unknowns by Ultra Performance L
Ann Arbor, MI, US
ASTM D3418 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings ASTM D3567 (sections 6, 7, 8) Standard Test Method for Oxidative-Induction Time of Polyolefins by Di
Barberton, OH, US
ASTM D3418 Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) ASTM D3850 Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric M
Duarte, CA, US
ASTM D3418 Test Method for Transition Tem peratures of Polymers by Thermal Analysis ASTM D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints ASTM D3479 Test Method for Tension-Tension Fat
Hunt Valley, MD, US
ASTM D3418; ASTM E793; ASTM E794; ASTM E1356; ASTM D4591; ASTM E537; ASTM E1269; ASTM E2160; ASTM F2625; IPC-TM-650 (Method 2.4.25) Filler Content, Thermal Stability, Weight Loss and Decomposition Temperature (Td) by Thermogravimet
Harper Woods, MI, US
ASTM D3418, ASTM D3895, ASTM D5028, ASTM E793, ASTM E794, ASTM E1269, ASTM E1356; GM9094P (1988); ISO 3146:1985 (Method C), ISO 11357-1, ISO 11357-2, ISO 11357-3 Thermogravimetric Analysis (TGA) ASTM D3850, ASTM E1131; ISO 6964,
Sidney, OH, US
ASTM D3418; ISO 11357-1, -3 Ash Content in Thermoplastics ASTM D5630 (Procedure B); ISO 3451-1 (Method A) Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E831 Thermogravimetric Analysis ASTM E1131
Lansing, NY, US
ASTM D3418, D3895, D4591, E794, E1356 DMA (Dynamic Mechanical Properties) ASTM D5023, D5024, D5026, D7028, E1640, E1867 TGA (Thermogravimetric Analyzer) ASTM E1131 TMA (Thermal Mechanical Analyzer) ASTM E831, E1545, E2092 Wet Chemi
Santa Ana, CA, US
ASTM D3418 FT-IR PTMP-7.2.1.2-P5 Melt Flow Rates of Thermoplastics by Extrusion Plastometer ASTM D1238 (Procedure A) Ash Testing by Muffle Furnace ASTM D5630 Durometer Hardness ASTM D2240 (Shore A and D) Surface Resistivity ASTM D257
New Berlin, WI, US
ASTM D3418; E793, E794, E1356, E2602 Oxidative Stability PA-14 ASTM D3895, E1858 (Method A only) Thermogravimetric Analysis (TGA) PA-04 ASTM E1131 Thermomechanical Analysis (TMA) PA-22 ASTM E831, E1545 Coating Analysis Weigh
Youngstown, PA, US
ASTM D3418, E1269, E2160; EN 6041, EN 6064; ISO 11357-2 LFA (Laser Flash Analysis) ASTM E1461 TMA (Thermomechanical Analysis) ASTM E831, E1545, E2092 Coefficient of Linear Thermal Expansion (CLTE) ASTM E228 Physical Properties C
Ravenna, OH, US
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 SMITHERS 425 West Market Street Akron, OH 44303-2088 Jeff Marek Phone: 330 762 7441 CHEMICAL Valid To: March 31, 2026 Certificate Number: 0363.01 In recogniti
Woburn, MA, US
ASTM D3418
Cincinnati, OH, US
ASTM D3418 Thermomechanical Analysis (TMA) ASTM E831, E1545 Coefficient of Linear Thermal Expansion (CLTE) ASTM E228 Thermal Diffusivity by the Flash Method ASTM E1461
Virgil, IL, US
ASTM D3418 DSC OI Time ASTM D3895 Thermogravimetric Analysis (TGA) ASTM D6370, E1131 Carbon Black by TGA ASTM D5805 Polymers Miscellaneous Specific Gravity or Density ASTM D792, D297 (Section 16.3) Ash Analysis ASTM D5630 Ignition
This page is a fixed slice of the register: every ASTM D3418 scope we hold for United States. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United StatesAmerican Association for Laboratory Accreditation (A2LA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United States.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.